Materials 

– 1 skein (50 g) of Yarn Art Jeans light brown 

– appr. 18 g of Yarn Art Jeans dark brown 

– appr. 5 g of Schachenmayr Glanzperle for the muzzle and the patches on the feet 

– a little of black Yarn Art Jeans for the nose and eyes 

– appr. 10 g of Madame Tricote Paris Star light green for the diaper 

– 2 buttons 

– hooks 2.5 and 3 mm 

My finished toy size : 30 cm high 

Abbrevations: 

Mr – magic ring 

Ch – chain 

Sl St – slip stitch 

Sc – single crochet 

Inc – increase 

Dec – decrease 

BLO – crochet into the back loops only 

Always work in continuous rounds, unless otherwise stated. 

Do not forget to mark the beginning of your crochet rounds! 

For the whole body use crochet hook 2.5 mm. 

Head 

1. 6 sc in mr 

2. 6 x inc (12) 

3. (1 sc, inc) -6x (18) 

4. (2 sc, inc) -6x (24) 

5. (3 sc, inc) -6x (30) 

6. (4 sc, inc) -6x (36) 

7. (5 sc, inc) -6x (42) 

8. (6 sc, inc) -6x (48) 

9. (7 sc, inc) -6x (54) 

10. (8 sc, inc) -6x (60) 

11. (9 sc, inc) -6x (66) 

12.-23. 66 sc 

24. (9 sc, dec) -6x (60) 

25. (8 sc, dec) -6x (54) 

26. (7 sc, dec) -6x (48) – begin filling 

27. (6 sc, dec) -6x (42) 

28. (5 sc, dec) -6x (36) 

29. (4 sc, dec) -6x (30) 

30. (3 sc, dec) -6x (24) – fasten off, finish 

Body 

1. 6 sc in mr 

2. 6 x inc (12) 

3. (1 sc, inc) -6x (18) 

4. (2 sc, inc) -6x (24) 

5. (3 sc, inc) -6x (30) 

6. (4 sc, inc) -6x (36) 

7. (5 sc, inc) -6x (42) 

8. (6 sc, inc) -6x (48) 

9. (7 sc, inc) -6x (54) 

10. (8 sc, inc) -6x (60) 

11. -16. 60 sc 

17. (8 sc, dec) -6x (54) 

18. 54 sc 

19. (7 sc, dec) -6x (48) 

20. 48 sc – fill gradually 

21. (6 sc, dec) -6x (42) 

22. -24. 42 sc 

25. (5 sc, dec) -6x (36) 

26. 36 sc 

27. (4 sc, dec) -6x (30) 

28. (3 sc, dec) -6x (24) – fasten off 

Arms(2 x) 

1. 6 sc in mr 

2. 6 x inc (12) 

3. (1 sc, inc) -6x (18) 

4. (2 sc, inc) -6x (24) 

5. (3 sc, inc) -6x (30) 

6.-7. 30 sc – begin filling 

8. (3 sc, dec) -6x (24) 

9. dec, 10 sc, dec, 10 sc (22) 

10. dec, 9 sc, dec, 9 sc (20) 

11. dec, 8 sc, dec, 8 sc (18) 

12.-13. 18 sc 

14. (4 sc, dec) -3x (15) 

15.-16. 15 sc 

17. (3 sc, dec) -3x (12) 

18.-21. 12 sc 

22. 6 x dec (6) – fasten off. 

Legs (2x) 

Crochet 9 Ch. 

We are going to work around these chains. 

Begin in the 2nd chain from the hook: 

1. 7 sc, 3 sc in the next chain, continue with 6 sc, inc in the 

last chain (18) 

2. 6 sc, 3 x inc, 6 sc, 3 x inc (24) 

3. 1 sc, inc, 6 sc, (1 sc, inc) – 3x, 6 sc, (1 sc, inc) -2x (30) 

4. 2 sc, inc, 6 sc, (2 sc, inc) – 3x, 6 sc, (2 sc, inc) -2x (36) 

5. 3 sc, inc, 6 sc, (3 sc, inc) – 3x, 6 sc, (3 sc, inc) -2x (42) 

6. BLO : 42 sc (crochet into the back loops only) 

7.-10. 42 sc 

11. 8 sc, 12 x dec, 10 sc (30) 

12. 8 sc, 6 x dec, 10 sc (24) – fill 

13. (2 sc, dec) -6x (18) 

14.-17. 18 sc 

18. (4 sc, dec) -3x (15) 

19.-23. 15 sc 

24. (3 sc, dec) -3x (12) 

25. 12 sc 

26. 6 x dec – finish, leave long yarn at the end. 

Ears(2x) 

with dark brown 

1. 6 sc in mr 

2. 6 x inc (12) 

3. (1 sc, inc) -6x (18) 

4. (2 sc, inc) -6x (24) 

5. (3 sc, inc) -6x (30) 

6. (4 sc, inc) -6x (36) 

7. (5 sc, inc) -6x (42) 

8.-9. 42 sc 

10. (5 sc, dec) -6x (36) 

11.-12. 36 sc 

13. (4 sc, dec) -6x (30) 

14. (3 sc, dec) -6x (24) 

15.-18. 24 sc 

19. (2 sc, dec) -6x (18) 

20.-24. 18 sc 

25. (1 sc, dec) -6x (12) 

26.-28. 12 sc – fasten off 

Footprints 

Make 6 pcs of small, 2 pcs of big. 

Small 

1. 6 sc in mr 

2. 6 x inc (12) – finish, leave a 

longer tail for sewing. 

Big 

1. 6 sc in mr 

2. 6 x inc 

3. (1 sc, inc) -6x(18) 

4. (2 sc, inc) -6x (24) – finish 

Muzzle 

Here you are going to work in rows. 

Make 17 Ch. 

Start in the 2nd Ch from the hook: 

1. 16 sc, Ch 1, turn 

2. inc, 14 sc, inc , Ch 1, turn (18) 

3. inc, 16 sc, inc, Ch 1, turn (20) 

4. inc, 18 sc, inc, Ch 1, turn (22) 

5. inc, 20 sc, inc, Ch 1, turn (24) 

6. 24 sc, Ch 1, turn (24) 

7. dec, 20 sc, dec, Ch 1, turn (22) 

8. dec, 18 sc, dec , Ch 1, turn (20) 

9. dec, 16 sc, dec, Ch 1, turn (18) 

10. dec, 14 sc, dec, Ch 1, turn (16) 

11. dec, 12 sc, dec (14) – fasten off. 

You can crochet around the shape with sc for a nicer look . 

Eyes (2x) 

Make 5 Ch. 

Work around the chains, start in the 2nd chain from the hook: 

1. 3 sc, 3 sc in the next stitch, 2 sc, inc in the last stitch – finish 

Nose 

Crochet 7 Ch. Work around the chains, start 

in the 2nd chain from the hook. 

1. 5 sc, 3 sc in the next stitch, 4 sc, inc (14) 

2.-3. 14 sc – fasten off. 

Tail 

1. 6 sc in mr 

2. 6 sc (6) 

3. (inc, 2 sc) -2x (8) 

4. 8 sc 

5. (inc, 3 sc) -2x (10) 

6. 10 sc 

7. (inc, 4 sc) -2x (12) 

8.-10. 12 sc – finish, fill. 

Diaper 

The yarn for the diaper was thicker, so here I used a 3 mm hook. 

We are working in rows, so at the end of each row you have to turn the work. 

Begin with crocheting 31 Ch. 

Start in the 2nd chain from the hook: 

1. 30 sc, Ch 1, turn 

2- 4. repeat with 30 sc 

5. 1 sc, dec, 24 sc, dec, 1 sc, Ch 1, turn (28) 

6. 1 sc, dec, 22 sc, dec, 1 sc, Ch 1, turn (26) 

7. 1 sc, dec, 20 sc, dec, 1 sc, Ch 1, turn (24) 

8. 1 sc, dec, 18 sc, dec, 1 sc, Ch 1, turn (22) 

9. 1 sc, dec, 16 sc, dec, 1 sc, Ch 1, turn (20) 

10. 1 sc, dec, 14 sc, dec, 1 sc,, Ch 1, turn (18) 

11. 1 sc, dec, 12 sc, dec, 1 sc, Ch 1, turn (16) 

12.-24. 16 sc 

25. 1 sc, inc, 12 sc, inc, Ch 1, turn (18) 

26. 1 sc, inc, 14 sc, inc, Ch 1, turn (20) 

27. 20 sc, Ch 1, turn 

28. 1 sc, inc, 16 sc, inc, Ch 1, turn (22) 

29. 8 sc, make 6 chains and leave out 6 

sc, 8 sc, Ch 1, turn – here will be the 

hole for the tail 

30. 8 sc, 6 sc into each of the 6 chains, 8 

sc, Ch 1, turn (22) 

31. 1 sc, inc, 18 sc, inc, 1 sc, Ch 1, turn (24) 

32. (3 sc, inc) -6x, Ch 1, turn (30) 

33.-35. 30 sc – fasten off. 

I have used a small amount of white cotton yarn and crocheted the diaper all around with sc, fastened two buttons as decorations and made 20 chain long straps to each 4 corners. 

The straps were decorated with little beads. 

Now we have all body parts ready and can begin with the assembly. Start with attaching the head to the body. 

The legs and the arms a going to move, so you can use any method you prefer. I have used just the yarns, which were left at the ends of each piece. However, do not forget to close the holes on the top of each leg and arm. 

Here is a little help with creating joint parts using your thread. 

My puppy looks like this 

The next step is sewing on the muzzle (do not stuff it!), the nose and the ears. The ears can be attached flatly or folded in half. 

Next I have made the eyes, embroidered a little mouth on the right side of the muzzle. 

Now sew the tail, and the footprints on the feet. 

Hair on the head 

At the top of the head, somwhere at the center, slip stitch into one of the stitches on the head and make 5 chains. Make sure there is a little piece of yarn left sticking out. 

Starting in the second chain, make 4 sc and sl st into another stitch on the head. 

Crochet 6 chains, and turn back, crocheting 5 sc. 

Repeat this step one more time again with 5 chains. 

At the end of the 3rd row sl st into the head and fasten off your work. 

Pull one of the yarn ends next to the other under your work (inside the head). This way you can knot the two ends together and hide them. 

The puppy is finished! 

Difficulty: medium 

Height: 24 cm (excluding ears) 

Materials and tools: 

✓ Yarn “Angora Magig Delicate” in the main gray color and a little light gray for the muzzle. (500m / 100g) 

✓ Yarn for overalls Soso Vita cotton (50 g / 240 m) 

✓ Hook 1.5 or any other suitable for your yarn. 

✓ Stocking needles 1.5 

✓ 2 finished eyes (6 mm) 

✓ Ready spout, if you will not sculpt from clay 

✓ Polymer clay of white and black colors 

✓ Filler: holofiber. 

✓ Copper wire of the frame. 

✓ Toning Pastel art 

✓ The needle is long for sewing parts and making ties. 

✓ Transparent glue “Crystal”. 

✓ Cloth-based adhesive plaster. 

✓ Thin mustache line 

✓ Small button for jumpsuit 

Symbols 

CH – Air loop 

SC – Table without crochet 

İNC – Increase (knit 2 SC from 1SC) 

DEC – Decrease (from 2 SC we knit 1 SC) 

(… ..) *… p- this means that the operations indicated in brackets repeat the number of times indicated after *. 

+ 1 offset loop (knit another loop, the row will start from here) 

Advice 

Use a contrasting thread as a marker. 

When crocheting toys, use a crochet hook that is thinner than recommended for the thread you choose. 

The thicker the threads, the larger the toy. 

The toy is knitted in a spiral. It is not necessary to connect the rows to each other. 

In the process of knitting, it is necessary to monitor the symmetry of the part. That is, if the marker begins to deviate to the right, an additional column must be knitted at the end of the row. 

This is the so-called offset loop – it is not shown in the description. 

Upper legs (2 parts) 

Knit with the main color (gray) 

1st row: 6 İNTO MAGİC RİNG 

2nd row: 6 İNC = 12 

3-7 rows: 12 SC 

8 row: (İNC, 5SC) * 2 p = 14 

9-11 rows: 14 SC 

12 row: (İNC, 6 SC) * 2 p = 16 

13-14 rows: 16 SC 

15 row: (İNC, 7 SC) * 2 p = 18 

16-25 rows: (10 rows) 18 SC 

26 row: (İNC, 8 SC) * 2 p = 20 

27-38 rows: (12 rows) 20 SC 

Cut and fasten the thread 

Tail 

We knit in the main color. 

1st row: 6 İNTO MAGİC RİNG 

2nd row: 6 SC 

3rd row: (İNC, 2 SC) * 2 p = 8 

4-5 rows: 8 SC 

6 row: (İNC, 3 SC) * 2 p = 10 

7-8 rows: 10 SC 

Cut and fasten the thread 

Ears (2 parts) 

We knit in the main color 

The marker runs from the side 

1st row: 6 İNTO MAGİC RİNG 

2nd row: 6 İNC = 12 

3rd row: (1 SC, İNC) * 6 p = 18 

4th row: (2 SC, İNC) * 6 p = 24 

5 row: (3SC, İNC) * 6 p = 30 

6-14 rows: (9 rows) 30 SC 

15 row: (DEC, 13 SC) * 2 p = 28 

16-18 rows: 28 SC 

19 row: (DEC, 12 SC) * 2 p = 26 

20-22 rows: 26 SC 

23 row: (DEC, 11 SC) * 2 p = 24 

24 row: 24 SC 

25 row: (DEC, 10 SC) * 2 p = 22 

26-30 rows: 22 SC 

Fold in half and tie 10 SC. Leave the thread for sewing. 

Lower legs (2 parts) 

We knit in the main color 

The marker runs from the side. Strictly observe symmetry. If necessary, knit offset loops. 

1st row: 6 İNTO MAGİC RİNG 

2nd row: 6İNC = 12 

3rd row: (1 SC, İNC) * 6 p = 18 

4-6 rows: 18 SC 

7 row: (DEC, 7 SC) * 2 p = 16 

8 row: 16 SC 

9 row: (DEC, 6 SC) * 2 p = 14 

10 row: 14 SC 

11 row: (DEC, 5 SC) * 2 p = 12 

12th row: 6 SL-ST, 6 HDC = 12 

13 row: 12 SC 

14 row: (İNC, 5 SC) * 2 p = 14 

15 row: (İNC, 6 SC) * 2p = 16 

16 row: (İNC, 7 SC) * 2 p = 18 

17 row: 18 SC 

18 row: (İNC, 8 SC) * 2 p = 20 

19-25 rows: 20 SC 

26 row: (İNC, 9 SC) * 2p = 22 

27 row: 22 SC 

28 row: (İNC, 10 SC) * 2 p = 24 

Rows 29-31: 24 SC 

32 row: (İNC, 11 SC) * 2 p = 26 

33 row: 26 SC 

34 row: (İNC, 12 SC) * 2 p = 28 

35 row: 28 SC 

Cut and fasten the thread 

Torso 

We knit in the main color 

1st row: 6 İNTO MAGİC RİNG 

2nd row: 6 İNC = 12 

3rd row: (1 SC, İNC) * 6 p = 18 

4th row: 3 SC, 3 SC in one loop, 1 SC, 3 SC in one loop, 6 SC, 3 SC in one loop, 1 SC, 3 SC in one loop, 3 SC = 26 

5 row: 4 SC, 3 SC in 1 loop, 3 SC, 3 SC in one loop, 8 SC, 3 SC in one loop, 3 SC, 3 SC in one loop, 4 SC = 34 

6 row: 5 SC, 3 SC in one loop, 5 SC, 3 SC in one loop, 10 SC, 3 SC in one loop, 5 SC, 3 SC in one loop, 5 SC = 42 

At this stage, we knit the lower legs. Pay attention to the position of the feet. They should be pointed forward towards the marker. 

Row 7: 6 SC on the trunk, 9 SC with 9 sts on the right leg, 12 SC on the trunk, 9 SC with 9 sts on the left leg, 6 SC on the trunk Place a marker. The marker runs down the center of the front. 

Strictly observe symmetry. If necessary, knit offset loops. 

Row 8: 6 SC on the trunk, 19 SC on the right leg, 12 SC on the trunk, 19 SC on the left leg, 6 SC on the trunk = 62 

9th row: (1 SC, İNC) * 6 p, 9 SC, (İNC, 2 SC) * 3 p, 2 İNC, (2 SC, İNC) * 3 p, 9 SC, (İNC, 1 SC) * 6 p = 82 

10 row: 4 SC, İNC, 2 SC, İNC, 22 SC, İNC, 3 SC, İNC, 12 SC, İNC, 3 SC, İNC, 22 SC, İNC, 2 SC, İNC, 4 SC = 90 

11-16 rows: (6 rows) 90 SC 

17 row: 43 SC, 4 SC together with 4 tail loops (the tail must be exactly in the center of the back), 43 SC = 90 

18 row: 43 SC, 6 SC along the remaining loops of the tail. 43 SC = 92 

19-23 rows: 92 SC 

24 row: 12 SC, DEC, 18 SC, DEC, (3 SC, DEC) * 2 p, 4 SC, (DEC, 3 SC) * 2p, DEC, 18 SC, DEC, 12 SC = 84 

25 row: 1 SC, DEC, (2 SC, DEC) * 4 p, 10 SC, DEC, 3 SC, DEC, 12 SC, DEC, 3 SC, DEC, 10 SC, (DEC 2 SC) * 4 p, DEC, 1 SC = 70 

26 row: 2 SC, DEC, 3 SC, DEC, 6 SC, DEC, 10 SC, DEC, 12 SC, DEC, 10 SC, DEC, 6 SC, DEC, 3 SC, DEC, 2 SC = 62 

27 row: 8 SC, DEC, 12 SC, DEC, 4 SC, DEC, 2 SC, DEC, 4 SC, DEC, 12 SC, DEC, 8 SC = 56 

28 – 29 rows: 56 SC 

30 row: 15 SC, DEC, 22 SC, DEC. 15 SC = 54 

31 row: 15 SC, DEC, 20 SC, DEC, 15 SC = 52 

32 row: (16 SC, DEC) * 2 p, 16 SC = 50 

At this stage, prepare the frame. Cut off two pieces of wire, 30 cm each. Make a loop at the end of each wire. At the junction, we wrap it with an adhesive plaster on a fabric base. 

We insert the wire into each leg and connect it together. We wrap the junction with adhesive tape. We stuff the carcass tightly enough during the knitting process. 

33-35 rows: 50 SC 

36 row: 13 SC, DEC, 20 SC, DEC, 13 SC = 48 

37-41 rows: 48 SC 

42 row: 8 SC, 10 SC with 10 loops of the right foot, 12 SC, 10 SC with 10 loops of the left foot, 8 SC = 48 

43 row: 8 SC, 10 SC on the remaining loops of the right foot, 12 SC, 10 SC on the remaining loops of the left foot, 8 SC = 48 

Prepare the frame for the upper legs. We cut the wire to the length of 2 handles + width + 2 cm. Bend the ends of the wire, insert into the legs. 

We connect with the wire coming from the lower legs. Wrap the junction with adhesive plaster. 

We insert the frame into the legs and fill in the details. 

44 row: 7 SC, DEC, 8 SC, DEC, 10 SC, DEC, 8 SC, DEC, 7SC = 44 

45 row: 7 SC, DEC, 6 SC, DEC, 10 SC, DEC, 6 SC, DEC, 7 SC = 40 

46 row: (6 SC, DEC) * 2 p, 8 SC, (DEC, 6 SC) * 2 p = 36 

47 row: (5 SC, DEC) * 2 p, 8 SC, (DEC, 5 SC) * 2 p = 32 

48-50 rows: 32 SC 

Leave the thread for sewing. 

Fill the carcass tightly, but not to a stone state. 

Head 

The marker runs from the side. Remember to keep an eye on symmetry 

We knit with light gray yarn 

1 row: 12 air loops 

2nd row: knit in the 2nd loop from the hook: İNC, 9 SC, 3 SC in one loop, on the other side: 9 SC, İNC = 25 

3rd row: 2 İNC, 9 SC, 3 İNC, 10 SC, İNC = 31 

4th row: 2 İNC, 10 SC, 5 İNC, 10 SC, 4 İNC = 42 

5th row: 3 SC, İNC, (6 SC, İNC) * 5 p, 3 SC = 48 

6 row: (7 SC, İNC) * 6 p = 54 

7 row: 54 SC 

8 row: 4 SC, İNC, (8 SC, İNC) * 5 p, 4 SC = 60 

9 row: (9 SC, İNC) * 6 p = 66 

10 row: 5 SC, İNC, (10 SC, İNC) * 5 p, 5 SC = 72 

11-20 rows: (10 rows) 72 SC 

21 row: 5 SC, DEC, (10 SC, DEC) * 5 p, 5 SC = 66 

22 row: 66 SC 

23 row: (9 SC, DEC) * 6 p = 60 

24 row: 60 SC for back half loops 

Cut and fasten the thread 

We count 15 loops and place a marker. The marker now passes over the top of the muzzle, in the center. We knit in the main color. 

25 row: 2 SC, İNC, (1 SC, İNC) * 5 p, 34 SC, (İNC, 1 SC) * 5 p, İNC, 2 SC = 72 

26 row: 1 SC, (İNC, 3 SC) * 2 p, İNC, 5 SC, İNC, 40 SC, İNC, 5 SC, İNC, (3 SC, İNC) * 2 p, 1 SC = 80 

27 row: 2 SC, İNC, 6 SC, İNC, 8 SC, İNC, 42 SC, İNC, 8 SC, İNC, 6 SC, İNC, 2 SC = 86 

28 row: 86 SC 

29 row: (2 SC, İNC) * 3 p, 68 SC, (İNC, 2 SC) * 3 p = 92 

30 row: 40 SC, 12 CH, skip 12 loops (we form a hole for the frame), 40 SC = 92 

31 row: (2 SC, İNC) * 3 p, 31 SC, 12 SC on air loops, 31 SC, (İNC, 2 SC) * 3 p = 98 

32 row: 98 SC 

33 row: 3 SC, İNC, 2 SC, İNC, 84 SC, İNC, 2 SC, İNC, 3 SC = 102 

34 row: 36 SC, DEC, 26 SC, DEC, 36 SC = 100 

35 row: 100 SC 

36 row: 3 SC, İNC, 92 SC, İNC, 3 SC = 102 

37-39 rows: 102 SC 

40 row: (15 SC, DEC) * 6 p = 96 

41 row: 96 SC 

42 row: 7 SC, DEC, (14 SC, DEC) * 5 p, 7 SC = 90 

Row 43: 90 SC 

44 row: (13 SC, DEC) * 6p = 84 

45 row: 6 SC, DEC, (12 SC, DEC) * 5p, 6 SC = 78 

46 row: (11 SC, DEC) * 6 p = 72 

47 row: 5 SC, DEC, (10 SC, DEC) * 5 p, 5 SC = 66 

48 row: (9 SC, DEC) * 6 p = 60 

49 row: 4 SC, DEC, (8 SC, DEC) * 5 p, 4 SC = 54 

50 row: (7 SC, DEC) * 6 p = 48 

We insert the frame into the head through the hole. We stuff the head tightly enough, but not to a stone state. 

51 row: 3 SC, DEC, (6 SC, DEC) * 5 p, 3 SC = 42 

52 row: (5 SC, DEC) * 6 p = 36 

53 row: 2 SC, DEC, (4 SC, DEC) * 5 p, 2 SC = 30 

54 row: (3 SC, DEC) * 6p = 24 

55 row: 1 SC, DEC, (2 SC, DEC) * 5 p, 1 SC = 18 

56 row: (1 SC, DEC) * 6 p = 12 

57 row: 6 DEC = 6 

Pull the loops, cut the thread and fasten. 

Registration 

First, we sew the head to the body. 

Then we make markings for tightening the muzzle. 

We count from the beginning of knitting 26 rows up and from the center (from the marker) we retreat four loops to the left (point B) and four loops to the right (point E). Mark the points with needles. 

Next, mark points A and D 

Distance between points B — A 3 loops 

Distance between points E – D 3 loops 

Distance between points E — B 8 loops 

The design of the face is one of the most important stages. It’s no secret that many toys are knitted according to the same principle. Their difference is in the design of the muzzle or face. 

We count down 6 rows from the beginning of knitting, and then 3 loops from the center to each side. 

These are points F and C 

For tightening we need a long needle and strong thread. 

We introduce the needle to point A and bring it to point C. Then we need to insert the needle nearby (the left corner of the mouth is formed) and output it at point A. 

We retreat from point A two loops and bring the needle to point B and bring it to point C. 

We return to the starting point A. Tie the two ends of the thread into a knot so that we get indentations for the eyes and mouth. We hide the ends of the threads in the head. 

Similarly, we make a tightening on the other side. 

D – F, F – D, D – E, E – F, F – D 

We tint the area under the eyes and the mouth with dry pastel to give expressiveness to the muzzle. 

Now let’s start sewing on the ears. 

We count from the place where the loops are closed 12 rows, fix the ears with needles and sew them tightly to the head along the entire perimeter. 

The eyes and nose can be molded from polymer clay. 

We sculpt the whites of the eyes from white clay. 

Roll up small balls, flatten slightly and make a depression with a half bead. 

We sculpt the nose from black clay in the shape you like. 

Bake the whites of the eyes and the nose according to the instructions on the package. 

Glue the eyes and nose. 

Attach the antennae in any way convenient for you. Roll or embroider eyebrows. 

Tint the mouth with dry pastels and draw a line from the nose to the mouth in the center of the muzzle. 

Overalls 

Symbols 

KNİT – front hinge 

PURL – purl loop 

Arr. from broach skr. – increase from the broach crossed 

This jumpsuit is tied to a toy with a height of 24 cm 

Cast on 32 stitches 

Knit in rotary rows 

Raglan = yarn, front loop, yarn 

1st row: 4 KNİT, raglan, 6 KNİT, raglan, 8 KNİT, raglan, 6 KNİT, raglan, 4 KNİT = 40 

2nd row: 40 PURL 

3rd row: 5 KNİT, raglan, 8 KNİT, raglan, 10 KNİT, raglan, 8 KNİT, raglan, 5 KNİT = 48 

4th row: 48 PURL 

5 row: 6 KNİT, raglan, 10 KNİT, raglan, 12 KNİT, raglan, 10 KNİT, raglan, 6 KNİT = 56 

6 row: 56 PURL 

7 row: 7 KNİT, raglan, 12 KNİT, raglan, 14 KNİT, raglan, 12 KNİT.reglan, 7 KNİT = 64 

8 row: 64 PURL 

9th row: 8 KNİT, raglan, 14 KNİT, raglan, 16 KNİT, raglan, 14 KNİT, raglan, 8 KNİT = 72 

10 row: 72 PURL 

11 row: 9 KNİT, raglan, 16 KNİT, raglan, 18 KNİT, raglan, 16 KNİT, raglan, 9 KNİT = 80 

12 row: 80 PURL 

13th row: 10 KNİT, raglan, 18 KNİT, raglan, 20 KNİT, raglan, 18 KNİT, raglan, 10 KNİT = 88 

14 row: 88 PURL 

15 row: 11 KNİT, raglan, 20 KNİT, raglan, 22 KNİT, raglan, 20 KNİT, raglan, 11 KNİT = 96 

16 row: 96 PURL 

17 row: 13 KNİT, close 22 loops (sleeve), 26 KNİT, close 22 loops (sleeve), 13 KNİT = 52 

18 row: 52 PURL 

19 row: 52 KNİT 

20 row: 52 PURL 

21 row: go to circular knitting (on 5 knitting needles), distributing 13 loops on each knitting needle, knit 52 KNİT 

22 row: (2 KNIT, approx. From the broach skr.) * 26 times = 78 

23 – 28 rows: 78 KNIT 

29 row: We knit a hole for the tail: close 3 loops, 72 KNİT. close 3 loops 

30 row: Above closed loops we collect 3 loops, 72 KNIT, over closed loops we collect 3 loops = 78 

31 – 45 rows: 78 KNIT 

Next, we knit again in rotary rows, knitting each half of the trousers separately 

46 – 59 rows: 39 stitches 

If desired, you can make decreases on the bottom or knit an elastic band. Close the loops The second half of the trousers knit the same way – on the remaining 39 loops, repeat 46 – 59 rows, attaching a thread to them. Close the hinges. 

Sew the trousers from the inside. 

We make a buttonhole. Sew on a button. 

So our little dog Bulka is ready! 

Let him give you joy and good mood! 

Jack Russell, Hankey.

I made Hankey with sock wool, crochet hook 2.5. Hankey then gets seated approximately 16 cm. Crocheting Hankey with cotton will make it slightly larger. Watch your safety eyes here on (size bigger).

Materials

1 ball Regia uni 4 ply natural white (600)

½ ball Regia uni 4 ply black (2066)

¼ ball Regia uni 4 ply orange / brown (2746)

Leftover gray, Regia uni 4 ply gray (1991)

Leftover brown, Regia uni 4 ply d.brown (2903)

Brown / black safety eyes 7mm

White felt

Black sewing thread (whiskers)

Filling

Crochet hook 2.5

Black dog nose 15mm

Abbreviations

inc = increase

dec = decrease

sc = single crochet

Sl-st = slip stitch

Mr = magic ring

Pattern

Head

Black

Round 1: Magic ring into 6sc

Row 2: 6inc (12sc)

Round 3: (1sc, 1inc) * 6 (18sc)

Row 4: (2sc, 1inc) * 6 (24sc)

Round 5: (3sc, 1inc) * 6 (30sc)

Row 6: (4sc, 1inc) * 6 (36sc)

Round 7: (5sc, 1inc) * 6 (42sc)

Row 8: 42sc

Round 9: (6sc, 1inc) * 6 (48sc)

Round 10: (7sc, 1inc) * 6 (54sc)

Row 11: (8sc, 1inc) * 6 (60sc)

Round 12: 60sc

Round 13: (9sc, 1inc) * 6 (66sc)

Round 14 to 21: 66sc (8 rounds)

Round 22: (9sc, 1dec) * 6 (60sc)

Row 23: (8sc, 1dec) * 6 (54sc)

Round 24: (7sc, 1dec) * 6 (48sc)

Round 25: (6sc, 1dec) * 6 (42sc)

Row 26: (5sc, 1dec) * 6 (36sc)

Round 27: (4sc, 1dec) * 6 (30sc)

Round 28: (3sc, 1dec) * 6 (24sc)

Tie off and get rid of wire.

Main spot

Orange / brown

Round 1: Magic ring into 6sc

Row 2: 6inc (12sc)

Round 3: (1sc, 1inc) * 6 (18sc)

Row 4: (2sc, 1inc) * 6 (24sc)

Round 5: (3sc, 1inc) * 6 (30sc)

Row 6: (4sc, 1inc) * 6 (36sc)

Round 7: (5sc, 1inc) * 6 (42sc)

Round 8: (6sc, 1inc) * 6 (48sc)

Tie off, leave enough thread.

We are now going to cut pieces of felt behind the safety eyes. You cut one rectangle and put your eye through it. Then you cut one half of you eye the felt away and on the other side cut it nicely in shape.

You can now place the safety eyes in the main spot, this is done between round 6 and 7 (do not add back covers yet!).

Point up.

Put the main spot with the eyes between rows 16 and 17 through the head. Position of the main spot is between rows 12 and 28 of the head.

Now you can fill the head.

Secure your head spot with pins and sew the head spot to the head.

Nose

Orange brown

Round 1: Magic ring into 6sc

Row 2: 6inc (12sc)

Round 3: (1sc, 1inc) * 6 (18sc)

Row 4: (2sc, 1inc) * 6 (24sc)

Round 5: (3sc, 1inc) * 6 (30sc)

Rounds 6 to 13: 30sc (8 rows)

Securing leaves enough thread.

Place the safety nose just above the magic ring.

Fill the nose and place it under the eyes. From below it must connect to the bottom edge of your main spot.

Embroider a line under the nose with black.

Ears

Orange / brown

Round 1: Magic ring into 6sc

Round 2: (1sc, 1inc) * 3 (9sc)

Row 3: (2sc, 1inc) * 3 (12sc)

Round 4: (3sc, 1inc) * 3 (15sc)

Switch from color to black

Round 5: (4sc, 1inc) * 3 (18sc)

Round 6: (5sc, 1inc) * 3 (21sc)

Round 7: (6sc, 1inc) * 3 (24sc)

Round 8: 24sc

Row 9: (7sc, 1inc) * 3 (27sc)

Round 10 to 16: 27sc (7 rounds)

Fold the ear and close it with 13sc.

Securing leaves enough thread.

Place the ears on the head between rows 5 and 18. Fold the bottom edge of double the ear and sew it on the head, he will get cute flappies (see picture).

Body

White

Round 1: Magic ring into 6sc

Row 2: 6inc (12sc)

Round 3: (1sc, 1inc) * 6 (18sc)

Row 4: (2sc, 1inc) * 6 (24sc)

Round 5: (3sc, 1inc) * 6 (30sc)

Row 6: (4sc, 1inc) * 6 (36sc)

Round 7: (5sc, 1inc) * 6 (42sc)

Round 8: (6sc, 1inc) * 6 (48sc)

Round 9: (7sc, 1inc) * 6 (54sc)

Round 10: (8sc, 1inc) * 6 (60sc)

Rounds 11 to 20: 60sc (10 revs)

Round 21: (8sc, 1dec) * 6 (54sc)

Round 22 + 23: 54sc

Round 24: (7sc, 1dec) * 6 (48sc)

Round 25 + 26: 48sc

Round 27: (6sc, 1dec) * 6 (42sc)

Round 28 + 29: 42sc

Round 30: (5sc, 1dec) * 6 (36sc)

Round 31 + 32: 36sc

Round 33: (4sc, 1dec) * 6 (30sc)

Tour 34 + 35: 30sc

Round 36: (3sc, 1dec) * 6 (24sc)

Round 37 + 38: 24sc

Securing leaves enough thread.

Fill the body and sew the head to the body.

Front legs

White

Round 1: Magic ring into 6sc

Row 2: 6inc (12sc)

Round 3: (1sc, 1inc) * 6 (18sc)

Row 4: (2sc, 1inc) * 6 (24sc)

Round 5: (3sc, 1inc) * 6 (30sc)

Round 6 to 8: 30sc

Round 9: 9sc, 6dec, 9sc (24sc)

Round 10: 9sc, 3dec, 9sc (21sc)

Round 11: 21sc

Round 12: (5sc, 1dec) * 3 (18sc)

Tour 13 + 14: 18sc

Fill the foot.

Row 15: (4sc, 1dec) * 3 (15sc)

Round 16 to 30: 15sc (15 rounds)

Row 31: 2sc, skip the rest.

Fill the leg lightly. Fold the bone closed and crochet it with 7sc.

Securing leaves enough thread.

Position of the front legs: between row 27 and 28 of the body with 1sc spacing.

Hind legs

Black

Round 1: Magic ring into 6sc

Row 2: 6inc (12sc)

Round 3: (1sc, 1inc) * 6 (18sc)

Switch color to white!

Row 4: (2sc, 1inc) * 6 (24sc)

Round 5: (3sc, 1inc) * 6 (30sc)

Row 6: (4sc, 1inc) * 6 (36sc)

Round 7: 12sc, 6dec, 12sc (30sc)

Round 8: 30sc

Round 9: (3sc, 1dec) * 6 (24sc)

Round 10 + 11: 24sc

Round 12: (6sc, 1dec) * 3 (21sc)

Round 13: 21sc

Fill your feet!

Round 14: 21sc

Round 15: (5sc, 1dec) * 3 (18sc)

Round 16 to 19: 18sc (4 rounds)

Round 20: (4sc, 1dec) * 3 (15sc)

Round 21 to 25: 15sc

Row 26: 1sc, skip the rest!

Fill the leg lightly. Fold the bone closed and crochet it with 7sc.

Securing leaves enough thread.

Position: on row 4 of the body.

Collar

Dark brown

Round 1: Magic ring into 6sc

Round 2: (1sc, 1inc) * 3 (9sc)

Row 3: 9sc

Round 4: (2sc, 1inc) * 3 (12sc)

Tour 5 to 50: 12sc (46 rpm)

Close the collar with 6sc.

Securing leaves enough thread.

Spikes (5 pieces)

Gray

Row 1: Magic ring into 4sc

Round 2: (1sc, 1inc) * 2 (6sc)

Row 3: (1sc, 1inc) * 3 (9sc)

End with a sl-st.

Securing leaves enough thread.

You place the first spike on row 13/14 of the collar. The rest you place with always 8sc spacing.

Now you can put the collar on at Hankey. Sew it in about 6sc from row 1 of the tape. Embroider 2 more black stripes to finish it strap.

Back spots

Black

1

Round 1: Magic ring into 6sc

Row 2: 6inc (12sc)

Round 3: (1sc, 1inc) * 6 (18sc)

Row 4: (2sc, 1inc) * 6 (24sc)

Round 5: (3sc, 1inc) * 6 (30sc)

2 (2x)

Round 1: Magic ring into 6sc

Row 2: 6inc (12sc)

Round 3: (1sc, 1inc) * 6 (18sc)

Row 4: (2sc, 1inc) * 6 (24sc)

3

Round 1: Magic ring into 6sc

Row 2: 6inc (12sc)

You can tie off all stains, leave enough thread.

Place 1 spot on his buttocks, in the middle of that spot comes the tail.

Tail

Fill in a little while crocheting the tail.

White

Round 1: Magic ring into 6sc

Round 2: (1sc, 1inc) * 3 (9sc)

Row 3: 9sc

Round 4: (2sc, 1inc) * 3 (12sc)

Round 5 + 6: 12sc

Round 7: (3sc, 1inc) * 3 (15sc)

Round 8 to 22: 15sc

Switch from color to black

Round 23 to 25: 15sc

End the round with a sl-st.

Securing leaves enough thread.

Place the tail in the center of the black buttock spot.

Finish

With sewing thread, give Hankey a few more whiskers.

Embroider toes (2 stitches each) on his legs.

Jack Russell, Hankey

Required materials and tools: 

1) for the head and upper legs, Bambino Nako yarn (25% wool, 75% acrylic, 130m / 50g) light beige – 2 pcs .; 

2) for panties yarn “Bambino” Kamtex (25% wool, 75% acrylic, 130m / 50g) red – 1 pc .; 

3) for boots “Bambino” Kamtex yarn (25% wool, 75% acrylic, 130m / 50g) orange – 0.5 pcs; 

4) for the sole yarn “Bambino” Kamtex (25% wool, 75% acrylic, 130m / 50g) white – a little; 

5) for a shirt yarn “Bambino” Kamtex (25% wool, 75% acrylic, 130m / 50g) light blue – 2 pcs .; 

6) for a vest yarn “Bambino” Kamtex (25% wool, 75% acrylic, 130m / 50g) yellow – 1 pc .; 

7) for a scarf, “Bambino” Nako yarn (25% wool, 75% acrylic, 130m / 50g) of light green color – 0.5 pcs; 

8) for the outer side of the ears yarn “Podmoskovnaya” from Troitsk (50% wool, 50% acrylic, 250m / 100g), color “cognac” – 0.5 pcs .; 

9) for the inner side of the ears “Bambino” Kamtex yarn (25% wool, 75% acrylic, 130m / 50g) light pink – 0.5 pcs; 

10) brown “Iris” thread for eyes – a little; 

11) light blue “Iris” or “Mouline” threads – a little; 

12) nylon thread or fishing line for tightening the muzzle – a little; 

13) filler (holofiber, or synthetic winterizer, or synthetic fluff) – 300 gr. 

14) aluminum (or copper) wire for weaving with a diameter of 2 mm for the frame – 3 – 4 m; 

15) white felt for the eyes – a little; 

16) eyes for dolls with a brown ray with a diameter of 16 mm – 1 pair; 

17) plastic black spout 1.5 cm wide – 1 pc .; 

18) transparent super-glue for attaching eyes and nose – a little; 

19) blue buttons with a diameter of about 8 mm – 2 pcs.; 

20) hook number 3; 

21) a needle with a large eye; 

22) scissors; 

23) colored pins for marking; 

24) white plastic or thick white cardboard for insoles – a little; 

25) white adhesive plaster or electrical tape for wrapping the ends of the wire; 

26) dry pastels or ordinary matte brown shades for toning. 

From the indicated materials, a toy is obtained with a size of 50 cm, excluding standing ears! 

Knitting tips: 

✓ Be sure to use a marker at the beginning of each row to help mark the first stitch of the new row. 

✓ Knit tightly enough, the aesthetic appearance of the toy will ultimately depend on this. 

With loose (loose) knitting, holes will glow after stuffing. 

✓ Stuff the toy tightly so that it does not lose its shape, but try not to stretch the canvas. Spend more time packing, try to keep the details filled like the ones shown by me. The final result and the appearance of the toy strongly depend on the correct filling. 

Abbrevations: 

CH – air loop; 

SC – single crochet; 

INC – single crochet increase; 

DEC – single crochet decrease; 

DC – double crochet; 

INCDC – increase in a column with a crochet; 

DECDC – Decrease of the double crochet; 

HDC – half double crochet; 

DECHDC – double crochet decrease; 

SL-ST – connecting post; 

BLO – back half loop; 

FLO – front half loop. 

Stage 1. Head. 

We knit in a spiral with light beige threads. 

1st row: 6 SC into magic ring (6) 

2nd row: 6 INC (12) 

3 row: (SC, INC) * 6 (18) 

4th row: SC, INC, (2 SC, INC) * 5, SC (24) 

5 row: (3 SC, INC) * 6 (30) 

6 row: 2 SC, INC, (4 SC, INC) * 5, 2 SC (36) 

7 row: (5 SC, INC) * 6 (42) 

8 row: 3 SC, INC, (6 SC, INC) * 5, 3 SC (48) 

9 row: (7 SC, INC) * 6 (54) 

10 row: 4 SC, INC, (8 SC, INC) * 5, 4 SC (60) 

11 row: (9 SC, INC) * 6 (66) 

12th row: 5 SC, INC, (10 SC, INC) * 5, 5 SC (72) 

13 row: (11 SC, INC) * 6 (78) 

14-20 row (7 rows): 78 SC (78) 

21 row: 6 SC, INC, (12 SC, INC) * 5, 6 SC (84) 

22 – 28 row (7 rows): 84 SC (84) 

29 row: 35 SC, (SC, INC) * 3, 2SC, (SC, INC) * 3, 35 SC (90) 

30 row: 35 SC, (2 SC, INC) * 3, 2SC, (2 SC, INC) * 3, 35 SC (96) 

31 row: 35 SC, (3 SC, INC) * 3, 2SC, (3 SC, INC) * 3, 35 SC (102) 

32 row: 35 SC, (4 SC, INC) * 3, 2SC, (4 SC, INC) * 3, 35 SC (108) 

33 row: 35 SC, (5 SC, INC) * 3, 2SC, (5 SC, INC) * 3, 35 SC (114) 

34 – 39 row (6 rows): 114 SC (114) 

40 row: 35 SC, (5 SC, DEC) * 3, 2SC, (5 SC, DEC) * 3, 35 SC (108) 

41 – 43 row (3 rows): 108 SC (108) 

44 row: 35 SC, (4 SC, DEC) * 3, 2SC, (4 SC, DEC) * 3, 35 SC (102) 

45 – 47 row (3 rows): 102 SC (102) 

48 row: 35 SC, (3 SC, DEC) * 3, 2SC, (3 SC, DEC) * 3, 35 SC (96) 

49 – 51 rows (3 rows): 96 SC (96) 

52 row: 35 SC, (2 SC, DEC) * 3, 2SC, (2 SC, DEC) * 3, 35 SC (90) 

53 – 55 row (3 rows): 90 SC (90) 

56 row: 35 SC, (1 SC, DEC) * 3, 2SC, (1 SC, DEC) * 3, 35 SC (84) 

57 row: 6 SC, DEC, (12 SC, DEC) * 5, 6 SC (78) 

58-60 row (3 rows): 78 SC (78) 

Row 61: (11 SC, DEC) * 6 (72) 

62 – 64 row (3 rows): 72 SC (72) 

65 row: 5 SC, DEC, (10 SC, DEC) * 5, 5 SC (66) 

66 – 68 row (3 rows): 66 SC (66) 

We fix the thread, cut it off. We fill our head with filler. 

Stage 2. Hands. 

First, knit the fingers with light beige threads. Each hand has 4 fingers (thumb, forefinger, middle and little finger). For the left and right hand, the fingers are knitted the same way. 

Thumb and pinky. 

1st row: 7 SC into magic ring (7) 

2 – 5 row (4 rows): 7 SC (7) 

We fix and cut the thread. 

Index finger and middle finger. 

1st row: 7 SC into magic ring (7) 

2 – 6 rows (5 rows): 7 SC (7) 

We fasten and cut the thread on one finger, and leave the thread on the second finger, continue to connect the fingers into the palm. 

Right hand: 

Row 1: 6 SC on the pinky, SC on the pinky and SC on the middle finger together DEC, 3 SC on the middle finger, SC on the middle finger and SC on the index finger together DEC, 5 SC on the index finger, SC on the index finger and SC on the middle finger together DEC, SC on the middle finger (18) 

Important! The marker for the beginning of the row runs down the middle of the back of the hand. Make sure that the marker does not move out during knitting, if necessary, knit offset loops. 

2nd row: SC, INC, (2 SC, INC) * 5, SC (24) 

3rd row: 24 SC (24) 

In the next row we tie the thumb. 

4th row: 17 SC in the palm, 3 SC together with the thumb (simultaneously grab SC of the palm and SC of the thumb), 4 SC in the palm (24) 

5 row: 17 SC in the palm, 4 SC in the thumb, 4 SC in the palm (25) 

6 row: 25 SC (25) 

7 row: (2 SC, DEC) * 6, SC (19) 

8 row: 4 SC, DEC, 8 SC, DEC, 3 SC (17) 

Important! Decreases in the 8th row are in the middle of the ribs of the palm above and below. If necessary, knit offset loops. 

We fill the fingers and palm with filler. 

We tie it up to the middle of the lower edge of the palm, transfer the marker here. 

Change the thread to light blue. 

9 row: 17 SC (17) 

10 row: INC, 7 SC, INC, 8 SC (19) 

Important! Increases in the 10th row are in the middle of the ribs of the palm above and below. If necessary, knit offset loops. 

11 – 12 row (2 rows): 19 SC (19) 

Row 13: for BLO INC, 9 SC, INC, 8 SC (21) 

14 – 20 row (7 rows): 21 SC (21) 

Row 21: 2 INC, 9 SC, INC, 9 SC (24) 

Note: 2 INC forms a cubot. 

Cut off 40 cm of wire. At the end we make a small loop, twist, insulate the twisted ends with adhesive tape or tape. We make two such blanks. 

We insert the wire blank into the handle. We fill the handle with filler. 

22 – 29 row (8 rows): 24 SC (24) 

We fix the thread, cut it off. We fill the handle to the end. 

We turn the handle in the direction of the palm away from ourselves. 

We attach a light blue thread to the first half-loop of the 13th row left where we knitted for BLO, and knit the cuffs of the sleeves of the shirt. 

1 – 5 row (5 rows): 19 SC (19) 

We fix the thread, cut it off, hide the ends. 

Sew a blue button 8 mm in diameter on top of the cuff. 

Left hand: 

1st row: 6 SC on the index finger, SC on the index finger and SC on the middle finger knit together DEC, 3 SC on the middle finger, SC on the middle finger and SC on the little finger knit together DEC, 5 SC on the little finger, SC on the little finger and SC of the middle finger knit together DEC , SC on the middle finger (18) 

Important! The marker for the beginning of the row runs down the middle of the back of the hand. Make sure that the marker does not slide out during knitting, if necessary, knit offset loops. 

2nd row: SC, INC, (2 SC, INC) * 5, SC (24) 

3rd row: 24 SC (24) 

In the next row we tie the thumb. 

4th row: 4 SC in the palm, 3 SC together with the thumb (simultaneously grab SC of the palm and SC of the thumb), 17 SC in the palm (24) 

5 row: 4 SC in the palm, 4 SC in the thumb, 17 SC in the palm (25) 

6 row: 25 SC (25) 

7 row: SC, (2 SC, DEC) * 6 (19) 

8 row: 4 SC, DEC, 8 SC, DEC, 3 SC (17) 

Important! Decreases in the 8th row are in the middle of the ribs of the palm above and below. If necessary, knit offset loops. 

We fill the fingers and palm with filler. 

We tie it up to the middle of the upper edge of the palm, transfer the marker here. 

Change the thread to light blue. 

9 row: 17 SC (17) 

10 row: INC, 8 SC, INC, 7 SC (19) 

Important! Increases in the 10th row are in the middle of the ribs of the palm above and below. If necessary, knit offset loops. 

11 – 12 row (2 rows): 19 SC (19) 

Row 13: for BLO INC, 8 SC, INC, 9 SC (21) 

14 – 20 row (7 rows): 21 SC (21) 

Row 21: INC, 9 SC, 2 INC, 9 SC (24) 

Note: 2 INC forms a cubot. 

We insert the wire blank into the handle. We fill the handle with filler. 

22 – 29 row (8 rows): 24 SC (24) 

We fix the thread, cut it off. We fill the handle to the end. 

We turn the handle in the direction of the palm away from ourselves. 

We attach a light blue thread to the first half-loop of the 13th row left where we knitted for BLO, and knit the cuffs of the sleeves of the shirt. 

1 – 5 row (5 rows): 19 SC (19) 

We fix the thread, cut it off, hide the ends. 

Sew a blue button 8 mm in diameter on top of the cuff. 

Stage 3. Legs. 

We knit the sole of the shoes with white threads. 

1 row: we collect a chain of 10 CH + 2 CH, in the third loop from the hook 4 DC, then 8 DC along the chain of CH, 5 DC in the last loop, 8 DC on the other side of the chain of CH, SL-ST (26) 

2nd row: 2 CH, DC in the same loop, 4 INCDC, 8 DC, 5 INCDC, 8 DC, SL-ST (36) 

3rd row: 2 CH, DC in the same loop, DC, (INCDC, DC) * 4, 8 DC, (INCDC, DC) * 5, 8 DC, SL-ST (46) 

According to the resulting trail, we cut out two blanks from white plastic or cardboard. 

4th row: for BLO 16 SC, 3 HDC, 21 DC, 3 HDC, 3 SC (46) 

Important! DC should be located in the front center of the toe. If necessary, knit offset loops. 

In the fourth row, we cut the thread, but do not fix it, that is, we pull it out and leave the loop, it will be useful to us further. 

We knit the toe of the shoe with a white thread. 

1st row: cast on 3 CH + 1 CH, in the second loop from the hook SC, then 2 more SC along the chain of CH, 3 SC on the other side of the chain of CH, CH, turn (6) 

2nd row: SC, 3 INC, 2 SC, CH, turn (9) 

3rd row: (SC, INC) * 3, 3 SC, CH, turn (12) 

4th row: SC, INC, (2 SC, INC) * 2, 4 SC, CH, turn (15) 

5 row: SC, INC, (3 SC, INC) * 2, 5 SC, CH, turn (18) 

Tie the straight side of the toe SC: 11 SC (11) 

We do not cut the thread, we continue to tie the toe to the shoe as follows: we hook the BLO of the toe and the FLO of the shoe, we knit them SL-ST (see photo below). We fasten the thread on the last loop, cut it off. 

We insert the plastic insole into the shoe. 

Change the thread to orange and continue to knit the shoe where we left the loop stretched out in the fourth row. 

5 row: for BLO we knit SC in a circle: 22 SC at the boot, 11 SC at the toe, 7 SC at the boot (40) 

6 row: DEC, 11 SC, DEC, 5 SC, DEC, 11 SC, DEC, 5 SC (36) 

7-9 row (3 rows): 36 SC (36) 

Cut off 1 m of wire. Fold in half, make a loop at the end in the shape of the foot, twist the ends. 

We make two such blanks. We insert the wire blank into the leg. We fill the boot with filler. 

Change the thread to red. 

10 row: 36 SC (36) 

11 row: for BLO 36 SC (36) 

12th row: 2 SC, DEC, (4 SC, DEC) * 5, 2 SC (30) 

13 – 32 row (20 rows): 30 SC (30) 

We fill the leg with filler while knitting. 

33 row: (4 SC, INC) * 6 (36) 

34 – 35 row (2 rows): 36 SC (36) 

We tie the last 35th row to the middle of the inner side of the leg, fasten the thread, cut it off. 

We attach the red thread to the first left half-loop of the 11th row where we knitted for BLO, and knit a “flare” at the panties. 

1 row: (5 SC, INC) * 6 (42) 

2-4 rows (3 rows): 42 SC (42) 

We fix the thread, cut it off, hide the ends. 

On the bottom of the pants we embroider “stitching” with blue or blue “Iris” threads. 

We knit the second leg in the same way, but in the 35th row we do not cut the thread, but leave it and connect the legs into the body. 

Stage 4. Body. 

On the leg where the thread was left uncut, dial 3 CH, connect it to the second leg: 

1 row: 36 SC on one leg, 3 SC on the CH chain, 36 SC on the second leg, 3 SC on the other side of the CH chain (78) 

We twist the wire from the legs, isolate the ends with adhesive plaster or electrical tape. 

2nd row: 34 SC, (INC, SC) * 2, INC, 34 SC, (INC, SC) * 2, INC (84) 

We tie it to the middle of the right side and transfer the marker for the beginning of the row here. 

3 – 10 rows (8 rows): 84 SC (84) 

We embroider a fly on the pants with blue or blue “Iris” threads. 

Change the thread to light blue and knit the shirt further. 

11 – 41 rows (30 rows): 84 SC (84) 

The 41st row is not tied to the middle of the side 3 SC. 

We fill the body with filler. 

In the next row we tie our hands. 

42 row: 6 SC with the right handle (simultaneously grab the SC of the arms and SC of the body), 36 SC on the body, 6 SC together with the left handle, 36 SC on the body (84) 

43 row: 18 SC on the right handle, 36 SC on the body, 18 SC on the left handle, 36 SC on the body (108) 

We fasten the wire from the handles to the main winding coming from the legs, the ends are well insulated with adhesive plaster or electrical tape. 

44 row: 108 SC (108) 

45 row: (18 SC, DEC, 32 SC, DEC) * 2 (104) 

46 row: (18 SC, DEC, 30 SC, DEC) * 2 (100) 

47 row: (18 SC, DEC, 28 SC, DEC) * 2 (96) 

48 row: (18 SC, DEC, 26 SC, DEC) * 2 (92) 

49 row: (18 SC, DEC, 24 SC, DEC) * 2 (88) 

50 row: (18 SC, DEC, 22 SC, DEC) * 2 (84) 

51 row: (18 SC, DEC, 20 SC, DEC) * 2 (80) 

52 row: (18 SC, DEC) * 4 (76) 

53 row: (18 SC, DEC, 16 SC, DEC) * 2 (72) 

We fill the body with filler. 

54 row: 5 SC, DEC, (10 SC, DEC) * 5, 5 SC (66) 

55 row: 66 SC (66) 

Change the thread to light beige. 

56 – 57 row (2 rows): 66 SC (66) 

We fasten the thread, cut it, leaving a long end for sewing on the head. 

Stage 5. Ears. 

We knit two pieces of brown color – this is the outer side of the ear, and two pieces of light pink color are the inner side of the ear. 

Pink lug details: 

1 row: we cast on 12 CH + 1 CH, from the second from the hook of the loop 12 SC, CH, turn (12) 

2nd row: INC, 10 SC, INC, CH, turn (14) 

3-4 row (2 rows): 14 SC, CH, turn (14) 

5 row: INC, 12 SC, INC, CH, turn (16) 

6 – 7 row (2 rows): 16 SC, CH, turn (16) 

8 row: INC, 14 SC, INC, CH, turn (18) 

9 – 22 row (14 rows): 18 SC, CH, turn (18) 

23 row: DEC, 14 SC, DEC, CH, turn (16) 

24 – 25 row (2 rows): 16 SC, CH, turn (16) 

26 row: DEC, 12 SC, DEC, CH, turn (14) 

27 – 28 row (2 rows): 14 SC, CH, turn (14) 

Row 29: DEC, 10 SC, DEC, CH, turn (12) 

30 – 31 rows (2 rows): 12 SC, CH, turn (12) 

32 row: DEC, 8 SC, DEC, CH, turn (10) 

We fix the thread, cut it off. 

We knit the brown details of the ears in the same way, but we do not cut the thread on them. 

We continue to knit, connect the details of the ears, tying along the SC contour (see photo below). 

We do not sew the finished ears yet. 

Stage 6. Tail. 

We knit with a light beige thread. 

1st row: 5 SC into magic ring (5) 

2nd row: 5 SC (5) 

3rd row: 5 INC (10) 

4-9 row (6 rows): 10 SC (10) 

10 row: (SC, INC) * 5 (15) 

11 – 22 row (10 rows): 15 SC (15) 

We fasten the thread, cut it, leaving the end for sewing on the tail. Lightly fill the tail with filler. Do not sew yet. 

Stage 7. Design of the muzzle. 

First, we make markings for tightening using colored pins. 

1) We count from the crown of 30 rows of SC down and in the middle of the protruding part of the muzzle we put a blue pin (point), in this place the nose will be located. 

2) Go up from the blue pin (point) 2 rows of SC perpendicularly upwards, then step back 6 SC to the left and put a green pin (point). 

3) We count from the green pin (point) 2 more SC to the left and put a red pin (point). 

4) Go up from the blue pin (point) 2 rows of SC perpendicularly upwards, then count 6 SC to the right and put a white pin (point). 

5) We count from the white pin (point) 2 more SC to the right and put a pink pin (point). 

The markup is ready, we proceed to the tightening itself. To do this, we need a long needle and a nylon thread or fishing line. 

We insert the needle in the last row of knitting in the center of the head at the back, we output it at the pink point, again we enter it at the white point and output it in the green one, we insert it at the red point and output it into the open hole of the head. We tighten the thread, tie the ends of the thread into several knots (see photo above). 

In place of the blue pin, put a plastic black nose, glue it with super glue. 

Cut out two round blanks from white felt with a diameter slightly larger than the diameter of the plastic pupils, that is, about 20 mm. We make small cuts in the middle of the felt blanks, insert plastic pupils with a diameter of 16 mm into the cuts. We try on the resulting eyes on the head, put them 3 rows of SC above the ties made. 

Sew the felt blanks to the head with small stitches with small stitches with brown Iris threads. 

We glue the plastic pupils with super glue. 

We embroider the groove running from the spout with brown threads (see photo). We step back from the nose 15 rows of SC down and embroider the mouth with brown Iris threads. 

Go up from the eyes 7 rows SC up and embroider the eyebrows with brown threads. 

With dry pastels (or ordinary matte shadows) of a dark brown color, we tint the eyes, slightly the nose and mouth. We draw with dry pastel a strip on the head and back of the head. 

We retreat from the crown of the head about 5 rows of SC and sew on the left and right ears. 

Stage 8. Vest. 

First, we knit the bottom elastic with yellow threads, turning rows, all rows behind BLO. 

1st row: cast on 5 CH, from the second from the hook of the loop 4 SC, CH, turn (4) 

2 – 73 rows (72 rows): 4 SC, CH, turn (4) 

Fold the edges of the resulting elastic together and connect SC, but for both half-loops. 

Next, we knit the top of the vest. The row start marker is located in the middle of the right side. 

1st row: tie elastic in a circle SC: 74 SC (74) 

From the 2nd row, we begin to knit a pattern using the jacquard crochet technique. 

2 – 3 rows (2 rows): 46 SC in yellow, 2 SC in light green, 6 SC in yellow, 2 SC in blue, 6 SC in yellow, 2 SC in light green, 10 SC in yellow (74) 

4 – 5 rows (2 rows): 48 SC in yellow, 2 SC in light green, 2 SC in yellow, 6 SC in blue, 2 SC in yellow, 2 SC in light green, 12 SC in yellow (74) 

6 – 7 rows (2 rows): 50 SC in yellow, 2 SC in light green, 6 SC in blue, 2 SC in light green, 14 SC in yellow (74) 

8 – 9 rows (2 rows): 48 SC in yellow, 2 SC in blue, 2 SC in yellow, 2 SC in light green, 2 SC in blue, 2 SC in light green, 2 SC in yellow, 2 SC in blue, 12 SC yellow (74) 

10 – 11 (2 rows): 46 SC in yellow, 6 SC in blue, 2 SC in yellow, 2 SC in light green, 2 SC in yellow, 6 SC in blue, 10 SC in yellow (74) 

12 – 13 rows (2 rows): 48 SC in yellow, 2 SC in blue, 2 SC in yellow, 2 SC in light green, 2 SC in blue, 2 SC in light green, 2 SC in yellow, 2 SC in blue, 12 SC in yellow (74) 

14-15 rows (2 rows): 50 SC yellow, 2 SC light green, 6 SC blue, 2 SC light green, 14 SC yellow (74) 

16 – 17 rows (2 rows): 48 SC in yellow, 2 SC in light green, 2 SC in yellow, 6 SC in blue, 2 SC in yellow, 2 SC in light green, 12 SC in yellow (74) 

18 – 19 rows (2 rows): 46 SC in yellow, 2 SC in light green, 6 SC in yellow, 2 SC in blue, 6 SC in yellow, 2 SC in light green, 10 SC in yellow (74) 

The jacquard pattern ends in the 19th row, then we continue to knit only with yellow threads. 

20-24 row (5 rows): 74 SC (74) 

We do not tie the last 24th row to the middle of the side, i.e. to the marker of the beginning of the row, 5 SC and transfer the marker. 

We put on the vest on the body and only after that we begin to knit the straps. 

25 row: 24 CH, 10 SC skip, 27 SC, 24 CH, 10 SC skip, 27 SC (102) 

26 row: DEC, 22 SC strap, DEC, 25 SC, DEC, 22 SC strap, DEC, 25 SC (98) 

27 row: DEC, 9 SC, DEC, 10 SC, DEC, 24 SC, DEC, 9 SC, DEC, 10 SC, DEC, 24 SC (92) 

28 row: 3 DEC, 13 SC, 3 DEC, 21 SC, 3 DEC, 13 SC, 3 DEC, 21 SC (80) 

29 row: DEC, 17 SC, DEC, 19 SC, DEC, 17 SC, DEC, 19 SC (76) 

We fix the thread, cut it off, hide the ends. 

Sew the head and tail to the body. The ponytail is located on the border of the vest and pants in the center at the back. 

Stage 9. Points. 

Cut off about 60 cm of wire. We make a blank of glasses from wire according to the scheme. 

Dushki about 11 cm. 

To make the rims of the glasses even, take any round object with a diameter of about 4 cm and wrap the wire around this object. 

The distance between the rims is 1 cm. 

After the wire blank is ready, we take the super-glue, spread it on the tips of the darlings and tightly wrap the wire with red thread over all glasses. 

We also spread the places where the thread ends with glue, and then wrap it, cut off the excess thread. 

With small pliers or round-nose pliers, we bend the tips of the darlings inward. 

The glasses are ready! You can put them on Clever-G! 

Stage 10. Scarf. 

We knit with light green threads. 

1st row: we collect a chain of 200 CH + 2 CH, from the third from the loop of the loop 200 DC, 2 CH, turn (200) 

2 – 4 rows (3 rows): 200 DC, 2 CH, turn (200) 

In the last 4th row, we do not knit 2 CH, but fasten the thread, cut it off. 

The scarf is ready! We put on a scarf on Umnik-G. Correcting tint and glasses. 

Congratulations!!! 

ready !!! 

Abbreviations 

Mr = Magic ring 

sc = single crochet 

inc = Increase 

dec = decrease 

sl-st = slip-stitch 

dc =double crochet 

Body And Head 

white color yarn 

1) Magic ring into 6sc 

2) 6inc: 12sc 

3) (1sc1inc) * 6: 18sc 

4) (2sc1inc) * 6: 24sc 

5) (3sc1inc) * 6: 30sc 

6) (4sc1inc) * 6: 36sc 

7) (5sc1inc) * 6: 42sc 

8) (6sc1inc) * 6: 48sc 

9) (7sc1inc) * 6: 54sc 

10) (8sc1inc) * 6: 60sc 

11) (9sc1inc) * 6: 66sc 

12) (10sc1inc) * 6: 72sc 

13) (11sc1inc) * 6: 78sc 

14.row: 78 sc 

15. row: (12 sc, 1 inc) * 6 = (84) 

16-17.rows: 84 sc 

18 .row: (13 sc, 1 inc) * 6 = (90) 

19. row: 90sc (repeat 11 times) 

20 .row: (28 sc, 1 dec) * 3 = (87) 

21 .row: (27 sc, 1 dec) * 3 = (84) 

22.row: (26 sc, 1 dec) * 3 = (81) 

23 .row: (25 sc, 1 dec) * 3 = (78) 

24 .row: (24 sc, 1 dec) * 3 = (75) 

25 .row: (23 sc, 1 dec) * 3 = (72) 

26 .row: (22 sc, 1 dec) * 3 = (69) 

27 .row: (21 sc, 1 dec) * 3 = (66) 

28.row: (20 sc, 1 dec) * 3 = (63) 

29 .row: (19 sc, 1 dec) * 3 = (60) 

30.row: (18 sc, 1 dec) * 3 = (57) 

31.row: (17 sc, 1 dec) * 3 = (54) 

32.row: (16 sc, 1 dec) * 3 = (51) 

33.row: (15 sc, 1 dec) * 3 = (48) 

34 .row: (14 sc, 1 dec) * 3 = (45) 

35.row: (13 sc, 1 dec) * 3 = (42) 

36 .row: (12 sc, 1 dec) * 3 = (39) 

37.row: (14 sc, 1 dec) * 3 = (36) 

38.row: (10 sc, 1 dec) 3 = (33) 

39.row: (9 sc, 1 dec). 3 = (30) 

40 .row: (8 sc, 1 dec). 3 = (27) 

fill the body. 

41 .row: (7 sc, 1 dec) * 3 = (24) 

From here on we are making head. 

42.row: (4 sc, 1 inc) * 6 = (30) 

43.row: (4 sc, 1 inc) * 6 = (36) 

44.row: (5 sc, 1 inc) * 6 = (42) 

45.row: (6 sc, 1 inc) * 6 = (48) 

46.row: (7 sc, 1 inc) * 6 = (54) 

47. row: (8 sc, 1 inc) * 6 = (60) 

48.row: 60 sc 

49. row: (9 sc, 1 inc) = (66) 

50.row: (10 sc, 1 inc) * 6 = (72) 

51.row: 72 sc (repeat 9 times.) 

52.row: (22 sc, 1 dec) * 3 = (69) 

53.row (21 sc, 1dec) * 3 = (66) 

54) (20sc 1 dec) * 3 = (63 sc) 

55) (19sc 1 dec) * 3 = (60 sc) 

56) (18sc 1 dec) * 3 = (57 sc) 

57) (17sc 1 dec) * 3 = (54 sc) 

58) (16sc 1 dec) * 3 = (51 sc) 

59) (15sc 1 dec) * 3 = (48 sc) 

60) (14sc 1 dec) * 3 = (45 sc) 

61) (13sc 1 dec) * 3 = (42 sc) 

62) (12sc 1 dec) * 3 = (39 sc) 

63) (11sc 1 dec) * 3 = (36 sc) 

64) (10sc 1 dec) * 3 = (33 sc) 

65) (9sc 1 dec) * 3 = (30 sc) 

66) (8sc 1 dec) * 3 = (27 sc) 

67) (7sc 1 dec) * 3 = (24 sc) 

68) (2sc 1 dec)*6 = (18sc) 

69) (1sc 1 dec)*6 = (12 sc) 

70) (1dec)*6 = (6sc) finish. 

NOSE 

1.row: 12 chain 

2.row: 12 sc 

3.row: 1inc, 10 sc, 1inc = (14) 

4.row: 1inc, 12 sc, 1inc = (16) 

5.row: 1inc, 14 sc, 1inc = (18) 

6.row: 1inc, 16 sc, 1inc = (20) 

7.row: 1inc, 18 sc, 1inc = (22) 

8.row: 22 sc (repeat this round 4 times) 

9.row: Restart from the 7th stitch on the sewing side. 

10.row: On the 7 th, 3sc, make a semicircle connecting a loop behind each stitch with a (sl-st) slip stitch, follow the same procedure on the other tears in the nose. See illustration. 

11.row: (1inc) * 3, connect with sl-st = (6) 

12 .row: (1 sc, 1inc) * Connect with 3 sl-st = (9) 

13 .row: (2 sc, 1inc) 3, connect with sl-st = (12 

14.row: 12 sc, connect with sl-st. 

15 .row: (3 sc, 1inc) 3, connect with sl-st = (15) 

16.row: 15 sc, connect with sl-st 

17.row: (4 sc, 1inc) * 3, connect with sl-st = (18) 

18.row: 18sc, connect with sl-st = 

19.row: (5 sc, 1inc) 3, connect with sl-st = (21) 

20.row: Now we will circle the same way on the other side. 

21.row: On the left side, to make the second half of the circle, fixing the rope to the left side of the left side of the seventh. We do 36sc in the loops next to the second half of the apartment. (78) See illustration. 

Note: 36sc in 21st, start here 

22.row: 78 sc (repeat this round three times) 

23.row: 36sc, (3sc, 1dec) * 4, 2 sc, (3sc, 1dec) * 4 

24.row: 36 sc, (2 sc, 1 dec) * 4, 2 sc, (2 sc, 1 dec) * 4 = (62) 

24.row: (4sc, 1dec) * 6, (1dec) * 6,2 sc, (1dec) * 6 = (44) fill, finish. 

NOTE: Start sewing, counting 8 rows up the length. 

EYE

with black rope 

1.row: Magic ring 8sc 

2.row: (1inc, 1incHDC) * 4 = (16) 

3.row: (1 sc, 1 inc, 1HDC, 1incHDC) * 4 = (24) 

4.row: (2 sc, 1 inc) * 8 = (32) 

5.row: (3 sc, 1 inc) * 8 = (40) finish. 

1. White inside of the eye with white rope 

1.row: Magic ring 6sc = (6) 

2.row: (2 inc) * 4, (1incHDC) * 4 = (12) 

3.row: (1 sc, 1 inc) * 4, (1HDC, 1incHDC) * 2 = (18) finish. 

2. White inside of eye with white rope 

1.row: Magic ring 6sc = (6) 

2.row: (2 inc) * 4, (1incHDC) * 4 = (12) 

3.row: (1 sc, 1 inc) * 4, (1HDC, 1incHDC) * 2 = (18) 

4.row: (2 sc, 1 inc) * 4, (2 HDC, 1incHDC) * 2 = (24) 

2nd black of the eye 

1.row: Magic ring 4sc = (4) 

2.row: (1 inc) * 4 = (8) finish. 

NOSE TIP

with Black rope 

1.row: Magic ring 6 sc 

2.row: 6inc = (12) 

3.row: (2sc, 2inc) * 3 = (18) 

4.row: 3 sc, 2inc, (4sc, 2inc) * 2,1sc = (24) 

5.row: 4 sc, 2inc, (6 sc, 2inc) * 2, 2 sc = 30 

6.row: 30 sc 

7.row: 5sc, 2dec, (6sc, 2dec) * 2,1sc = (24) 

8.row: (2sc, 1dec) * 6 = (18) 

9.row: (1 sc, 1dec) * 6 = (12) fill. 

10.row :(1dec) * 6 = (6) Close and leave a long thread to sew. 

Slant the nose in the middle of the nose in a corner. Create a black line below the nose with a long thread twice from where you sew. Then make dots with three knots to the right and left. knot the rope around the needle. Repeat three times. 

MOUTH

with white rope 

1.row: Magic ring 5 sc 

2.row: 5inc = (10) 

3.row: (1sc, 1inc) * 5 = (15) 

4.row: (2sc, 1inc) * 5 = (20) 

5.row: (3sc, 1inc) * 5 = (25) 

6.row: 25sc (repeat 7 times) very little fill. 

Tongue:

Red with rope 

1.row: 4 chain 

2.row: 3 sc, to the last ring of the 4sc chain, 3sc = (10) 

3.row: 4 sc, 2inc, 4 sc (12) 

4.row: 5 sc, 2inc, 5 sc = (14) 

Place the tongue in the middle of the mouth. Suture under the nose. 

EAR

with white rope 

1.row: Magic ring 6sc 

2.row: 3inc, 3sc = (9) 

3.row: 2sc, 3inc, 4sc = (12) 

4.row: 4sc, 3inc, 5sc = (15) 

5.row: 6sc, 1inc, 8sc = (16) 

6.row: 5sc, 3inc, 8sc = (19) 

7.row: 6sc, 3inc, 10sc = (22) 

8.row: 8sc, 1inc, 13sc = (23) 

9.row: 9sc, 1inc, 13sc = (24) 

10.row: 24sc 

11.row: 10 sc, 1inc, 13sc = (25) 

12.row: 25sc 

13.row: 11sc, 1inc, 13sc = (26) 

14.row: 26sc 

15.row: 11sc, 1inc, 14sc = (27) 

16.row: 27sc 

17.row: 12sc, 1inc, 14sc = (28) 

18.row: 28sc 

19.row: 13sc, 1c, 14sc = (29) 

20.row: 29sc 

21.row: 29 sc 

22.row: 14 sc, 1 inc, 14 sc = (30) 

23.row: 30sc (repeat 11 times) 

finish. 

LEGS

(4 pcs) with white rope 

1) Magic ring into 6sc 

2) 6inc: 12sc 

3) (1sc1inc) * 6: 18sc 

4) (2sc1inc) * 6: 24sc 

5) (3sc1inc) * 6: 30sc 

6) (4sc1inc) * 6: 36sc 

7) (5sc1inc) * 6: 42sc 

8) 42sc (repeat 4 times) 

9) (2 HDC, 1 decHDC) * 6.18sc = (36) 

10) (1HDC, 2 decHDC) * 6.18sc = (30) 

11) (2 decHDC) * 6, 18sc = (24) 

12) 24sc (repeat 5 times) 

13) 1dec, 22sc = (23) 

14) 23sc (repeat 5 times) 

15) 1dec, 21sc = (22) 

16) 22sc (repeat 7 times) 

17) 1dec, 20sc = (21) 

18) (5sc, 1dec) * 3 = (18) 

19) Fill in (1sc, 1dec) * 6 = (12). 

20) (1dec) * 6 = (6) 

finish. 

With a white thread, separate the toes as in the photo. Sew the front legs, sew the entire length from top to bottom. The rear legs are sewn to the side, the legs are sewn to the left and right of the front legs. 

The Paw Large SPOTS

With black rope 

1) Magic ring 6sc 

2) 6inc = (12) 

3) (1sc, 1inc) * 6 = (18) 

Small SPOTS

with black rope 

1. Row: magic ring 6 x 

Sew the parts with four feet as in the photo. 

TAIL

with white rope 

1) Magic ring 4sc 

2) 1inc, 3sc = (5) 

3) 1inc, 4sc = (6) 

4) 1inc, 5sc = (7) 

5) 1inc, 6sc = (8) 

6) 1inc, 7sc = (9) 

7) 1inc, 8sc = (10) 

8) 10sc 

9) 1inc, 9sc = (11) 

10) 11sc 

11) 1inc, 10sc = (12) 

12) 12sc 

13) 1inc, 11sc = (13) 

14) 13sc 

15) 1inc, 12sc = (14) 

16) 14sc 

17) 1inc, 13sc = (15) 

18) 15sc (repeat 19 times) = (15) 

19) (1sc, 1dec) * 5 = (10), fill in. 

20) (1dec) * 5 = (5) 

finish. 

BLACK SPOTS IN BODY

With black rope 

BIG SPOTS

With black rope 

1) magic ring 6 sc 

2) (1inc) * 6 = (12) 

3) (1 sc, 1 inc) * 6 = (18) 

4) (2 sc, 1inc) * 6 = (24) 

5) (3sc, 1 inc) * 6 = (30) 

KITTY SPOTS

With black rope 

1) magic ring 6 sc 

2) (1inc) * 6 = (12) 

3) (1 sc, 1 inc) * 6 = (18) 

Separate the speckles evenly over the entire dog. Also remember ears, legs and tail. 

OVERFLOW 

Red with rope 

1) 4 chain on check, 4sc turn 

2) 4sc, turn (repeat 19 times) 

NECKLACE 

YELLOW with rope 

1) magic ring 6 sc 

2) (1inc) * 6 = (12) 

3) (1 sc, 1 inc) * 6 = (18) 

4) (2 sc, 1inc) * 6 = (24) 

finish. 

x poodle x

Author: Anastasia Makeeva

Today I offer you

tie wonderful

a toy – a poodle dog.

Materials i

used:

– yarn “Dolce” exactly 20

gr .;

– the main yarn 300 m /

100 gr., About 30 gr.;

– hooks 2 and 3,5;

– filler;

– eyes 6-7 mm;

– floss for embroidery

muzzles;

– nose 9-10 mm (it can and

embroider);

 Toy growth at

materials used

– 15 cm sitting and 22 cm

completely.

ABBREVATİONS

Sc: single crochet.

ch: CHAİN

inc – increase, knit 2 sc from one loop.

Dec – decrease, knit 2 sc together.

PATTERN

Head.

We start with Dolce yarn.

1.6 sc into magic ring (6)

2.6 inc (12)

3. (1 sc, inc) × 6 (18)

4. (2 sc, inc) × 6 (24)

5. (3 sc, inc) × 6 (30)

6. (4 sc, inc) × 6 (36)

7. (36)

Change the yarn.

8. – 17. (36)

Insert eyes between 12 and 13 side by side, between eyes 4 sc.

18. (4 sc, dec) × 6 (30)

19. (3 sc, dec) × 6 (24)

20. (2 sc, dec) × 6 (18)

21. (18)

Muzzle.

Knit with ordinary yarn

1.6 sc into magic ring (6)

2.6 inc (12)

3. (1 sc, inc) × 6 (18)

4. – 9. (18)

Insert the nose between 2 and 3 side by side.

The ears.

We knit with Dolce yarn.

1.6 sc into magic ring (6)

2.6 inc (12)

3. – 5. (12)

6.6 dec (6)

Body.

We knit with ordinary yarn.

 1.6 sc into magic ring (6)

2.6 inc (12)

3. (1 sc, inc) × 6 (18)

4. (2 sc, inc) × 6 (24)

5. (3 sc, inc) × 6 (30)

6. (4 sc, inc) × 6 (36)

7. – 12. (36)

13. (4 sc, dec) × 6 (30)

14. – 16. (30)

17. (3 sc, dec) × 6 (24)

18. – 20. (24)

21. (2 sc, dec) × 6 (18)

Change the yarn to “Dolce”.

22. and 23. (18)

24. dec × 9 (9)

Upper paws.

We knit with ordinary yarn.

1.6 sc into magic ring (6)

2.6 inc (12)

3. (3 sc, inc) × 3 (15)

4. – 6 (15)

7. (3 sc, dec) × 3 (12)

8. (4 sc, dec) × 2 (10)

Change the yarn to “Dolce”.

9. – 10. (10)

We change to ordinary yarn.

11. – 24. (10)

Connect the edge of 5 sc, leave the thread for sewing. Sew under

collar.

(If we use button fastening – in the 25th row we make 5 decreases and

tighten the hole).

Tail.

We knit with Dolce yarn.

1.6 sc into magic ring (6)

2.6 sc (6)

Change to plain yarn

3. – 14. (6)

Sew between 6 and 7 rows.

Lower paws.

We knit “Souffle”.

1.6 sc into magic ring (6)

2.6 inc (12)

3. (1 sc, inc) × 6 (18)

4. – 6. (18)

7. (1 sc, dec) × 3 (12)

8. (4 sc, dec) × 2 (10)

Change the yarn to “Dolce”.

9. – 10. (10)

We change to ordinary yarn.

11. – 22. (10)

Close the knit, knitting 5 sc for both sides. Sew between 3 and

4 rows of body.

(If we use button fastening – in the 25th row we make 5 decreases and

tighten the hole).

Your poodle is ready! Thank you very much for your attention to my

to the master class! I hope you enjoyed it.

Abbreviations:

CH – chain

SC – single crochet

İNC – increase (two columns are tied in one loop)

DEC – decrease (two columns are connected together)

SL-ST – slip-stitch

HDC – half double crochet

DC – double crochet

PATTERN

Hands (Make 2)

1. 6 sc in magic ring (6)

2. 6inc (12)

3. (1sc, 1inc)*6 (18)

4. – 7. 18sc

8. (7sc, 1dec)*2 (16)

9. 16sc

10. (6sc, 1dec)*2 (14)

11. 14sc

12. (5sc, 1dec)*2 (12)

13. – 20. 12sc

Foot and Legs (Make 2)

1. 6 sc in magic ring (6)

2. 6inc (12)

3. (1sc, 1inc)*6 (18)

4. (2sc, 1inc)*6 (24)

5. (3sc, 1inc)*6 (30)

6. – 8. 30sc

9. 6sc, (1dec,1sc)*6,6sc (24)

10. 6sc, (1dec, 1sc)*4, 6sc (20)

11. – 15. 20sc

16. 3sc,1dec, 10sc, 1dec, 3sc (18)

17. 18sc

18. 3sc, 1dec, 8sc, 1dec, 3sc (16)

19. 16sc

If u finished the first leg, please cut the yarn.

If u finished the second leg, please don’t cut the yarn and we will continue making the body.

Body

Continue 5chain and the join first leg.

0. 16sc on the first leg, 6sc on the chain, 16sc on the second leg,

6sc on the chain (44)

1.4sc, 1inc, 5sc, 1inc, 14sc, 1inc, 5sc, 1inc, 12sc (48)

2. (5sc, 1inc)*8 (56)

3. sc, (8sc, 1inc)*3, sc, (8sc, 1inc)*3 (62)

4. – 13. 62sc

14. 10sc, 1dec, 6sc, 1dec, 42sc (60)

15. (8sc, 1dec)*6 (54)

16. (3sc, 1dec,4sc)* 6 (48)

17. – 18. 48sc

19. (1dec, 6sc)*6 (42)

20. 42sc

21. (5sc, 1dec)*6 (36)

22. – 24. 36sc

25. (4sc, 1dec)*6 (30)

26. Make 4 sc on the first arms, continue making sc on the body,

make 4sc on the second arms and continue making sc on the

body (30)

27. Make 8 sc on the first arms, continue making sc on the body,

make 8sc on the second arms and continue making sc on the

body (38)

28. Make 4dec on the first arms, continue making sc on the body,

make 4dec on the second arms and continue making sc on the body. (30)

29. (3sc, 1dec)*6 (24)

30. (2sc, 1dec)*6 (18)

31. (1sc, 1dec)*6 (12)

32. 12sc

Head

0.Make 12 sc in the circle (12)

1. 12inc (24)

2. (3sc, 1inc)*6 (30)

3. (1inc, 4sc)*6 (36)

4. (3sc, 1inc, 2sc)*6 (42)

5. (6sc, 1inc)*6 (48)

6. (1inc, 7sc)*6 (54)

7. (4sc, 1inc, 4sc)*6 (60)

8. (9sc, 1inc)*6 (66)

9. (1inc, 10sc)*6 (72)

10. – 13. 72sc

14. 25sc, (1dec, 2sc)*5, 1dec, 25sc (66)

15. 66sc

16. 22sc, (1dec, 2sc)*5, 1dec, 22sc (60)

17. – 19. 60sc

20. 16sc, 1dec, 3sc, 1dec, 3sc, 1dec, 4sc, 1dec, 3sc, 1dec,

3sc, 1dec, 16sc (54)

21. 54sc

22. (7sc, 1dec)*6 (48)

23. (1dec, 6sc)*6 (42)

24. (2sc, 1dec, 3sc)*6 (36)

25. (4sc, 1dec)*6 (30)

26. (1dec, 3sc)*6 (24)

27. (2sc, 1dec)*6 (18)

28. (1dec, 1sc)*6 (12)

29. 6dec (6)

Tail

1. 8sc in magic ring (8)

2. – 3. 8sc

4. 1inc, 7sc (9)

5. 1inc, 8sc (10)

6. 1inc, 9sc (11)

7. 1inc,10sc (12)

8. 1inc, 11sc (13)

9. 1inc, 12sc (14)

10. 1inc, 13sc (15)

11. 1inc, 14sc (16)

12. 1inc, 15sc (17)

13. 1inc, 16sc (18)

Ears (Make2)

1. 6 sc in magic ring (6)

2. 6inc (12)

3. 2sc, 3inc, 3sc, 3inc, 1sc (18)

4. 3sc, 3inc, 6sc, 3inc, 3sc (24)

5. 4sc, 3inc, 9sc, 3inc, 5sc (30)

6. 5sc, 3inc, 12sc, 3inc, 7sc (36)

7. – 10. 36sc

11. 6sc, 2dec, 16sc, 2dec, 6sc (32)

12. 32sc

13. 6sc, 1dec, 15sc, 1dec, 7sc (30)

14.30sc

15. 5sc, 1dec, 14sc, 1dec, 7sc (28)

16. 28sc

17. 5sc, 1dec, 14sc, 1dec, 5sc (26)

18. 4sc, 1dec, 12sc, 1dec, 6sc (24)

19. 3sc, 1dec, 11sc, 1dec, 6sc (22)

20. 3sc, 1dec, 10sc, 1dec, 5sc (20)

21. 3sc,dec, 8sc,dec, 5sc (18)

22. (1sc, 1dec)*6 (12)

Nose

Start with black yarn

1. Make 5 chain and start with second chain

2. 3sc, 4sc in 1 sc, 3sc, 4sc in 1sc (14)

3. 3sc, 4inc, 3sc, 4inc (22)

4. 3sc, (1sc, 1inc)*4, 3sc, (1sc, 1inc)*4 (30)

5. 3sc, (2sc, 1dec)*4, 3sc, (2sc, 1dec)*4 (22)

Pinterest Offical Page : Crochet.pinto.live

Facebook Group: Crochet.pinto.live

Facebook Offical Page: Crochet.pinto.live

Trailer

Abbrevations

CH – chain

Sl-st – slip-stitch

Sc – single crochet

Inc – increase

Dec – decrease

D3ec – 3sc into 1 sc decrease

V – row

TRUNK (stuff during knitting)

Decreases from 18 to 28 rows should go as follows:

• 1 decrease – in the center of the abdomen;
• 2 decreases on the sides.

V1 – 6 sc in MAGIC RING (6)

V2 – inc х6 (12)

V3 – (1 sc, inc) x6 (18)

V4 – (2 sc, inc) х6 (24)

V5 – (3 sc, inc) х6 (30)

V6 – (4 sc, inc) х6 (36)

V7 – (5 sc, inc) х6 (42)

V8 – V17 – sc in each loop (42)

V18 – 40 sc, dec (41)

V19 – sc in each loop (41)

V20 – 37 sc, dec х2 (39)

V21 – sc in each loop (39)

V22 – 37 sc, dec (38)

V23 – sc in each loop (38)

V24 – 36 sc, dec (37)

V25 – sc in each loop (37)

V26 – 33 sc, dec х2 (35)

V27 – sc in every singing (35)

V28 – 33 sc, dec (34)

V29 – V40 – sc in each loop (34)

V41 – (dec, 4 sc) x5, dec, 2 sc (28)

V42 – (dec, 2 sc) x7 (21)

V43 – (dec, 1 sc) x7 (14)

V44 – dec х7 (7)

Fasten and cut the thread.

RIGHT FRONT FEET (padding while knitting)

V1 – 6 sc in MAGIC RING (6)

V2 – inc х6 (12)

V3 – 2 sc, inc х3, 7 sc (15)

V4 – dec, d3ec x2, dec, 5 sc (9)

V5 – 1 sc, dec, 6 sc (8)

V6 – V8 – sc in each loop (8)

V9 – 3 sc, inc, 4 sc (9)

V10 – sc in each loop (9)

V11 – 3 sc, inc, 5 sc (10)

V12 – 4 sc, inc, 5 sc (11)

V13 – 7 sc, inc, 3 sc (12)

V14 – sc in each loop (12)

V15 – 1 sc, inc, 5 sc, inc, 3 sc (14)

V16 – 1 sc (1)

V17 – CH, turn, 8 sc (8)

V18 – CH, turn, dec, 6 sc (7)

Cut the thread, leaving a long end for sewing.

LEFT FRONT FOOT (padding while knitting)

V1 – 6 sc in MAGIC RING (6)

V2 – inc х6 (12)

V3 – 7 sc, inc х3, 2 sc (15)

V4 – 5 sc, dec, d3ec х2, dec (9)

V5 – 6 sc, dec, 1 sc (8)

V6 – V8 – sc in each loop (8)

V9 – 6 sc, inc, 1 sc (9)

V10 – sc in each loop (9)

V11 – 7 sc, inc, 1 sc (10)

V12 – sc in each loop (10)

V13 – 8 sc, inc, 1 sc (11)

V14 – 10 sc, inc (12)

V15 – 4 sc, inc, 5 sc, inc, 1 sc (14)

V16 – 13 sc (13)

V17 – CH, turn, 8 sc (8)

V18 – CH, turn, dec, 6 sc (7)

Cut the thread, leaving a long end for sewing.

RIGHT REAR FEET (padding while knitting)

V1 – 6 sc in MAGIC RING (6)

V2 – inc х6 (12)

V3 – 2 sc, inc х3, 7 sc (15)

V4 – dec, d3ec x2, dec, 5 sc (9)

V5 – 1 sc, dec, 6 sc (8)

V6 – V7 – sc in each loop (8)

V8 – 6 sc, inc, 1 sc (9)

V9 – 3 sc, inc, 3 sc, dec (9)

V10 – 3 sc, inc, 5 sc (10)

V11 – 4 sc, inc, 5 sc (11)

V12 – 4 sc, inc, 6 sc (12)

V13 – 4 sc, inc, 1 sc, inc, 5 sc (14)

V14 – 6 sc, inc, 1 sc, inc, 5 sc (16)

V15 – sc, inc, 7 sc, inc х2, 5 sc (19)

V16 – 13 sc, inc, 5 sc (20)

V17 – 3 sc (3)

V18 – CH, turn, 11 sc (11)

V19 – CH, turn, 11 sc (11)

V20 – CH, turn, 8 sc, dec (10)

Cut the thread, leaving a long end for sewing.

LEFT REAR FEET (padding while knitting)

V1 – 6 sc in MAGIC RING (6)

V2 – inc х6 (12)

V3 – 7 sc, inc х3, 2 sc (15)

V4 – 5 sc, dec, d3ec х2, dec (9)

V5 – 6 sc, dec, 1 sc (8)

V6 – V7 – sc in each loop (8)

V8 – 2 sc, inc, 5 sc (9)

V9 – 6 sc, inc, 2 sc (10)

V10 – 2 sc, dec, 4 sc, inc, 1 sc (10)

V11 – 7 sc, inc, 2 sc (11)

V12 – 8 sc, inc, 2 sc (12)

V13 – 3 sc, inc, 4 sc, inc, 3 sc (14)

V14 – 3 sc, inc, 5 sc, inc, 4 sc (16)

V15 – 5 sc, inc, 5 sc, inc х2, 3 sc (19)

V16 – 14 sc, inc, 4 sc (20)

V17 – 17 sc (17)

V18 – CH, turn, 11 sc (11)

V19 –CH, turn, 11 sc (11)

V20 – CH, turn, dec, 9 sc (10)

Cut the thread, leaving a long end for sewing.

HEAD (stuff in the knitting process)

V1 – 6 sc in MAGIC RING (6)

V2 – inc х6 (12)

V3 – (1 sc, inc) x6 (18)

V4 – (2 sc, inc) х6 (24)

V5 – (3 sc, inc) х6 (30)

V6 – V17 – sc in each loop (30)

Cut the thread, leaving a long end for sewing.

Muzzle

V1 – 6 sc in MAGIC RING (6)

V2 – inc х6 (12)

V3 – (5 sc, inc) х2 (14)

V4 – sc in each loop (14)

V5 – (6 sc, inc) х2 (16)

V6 – sc in each loop (16)

V7 – (7 sc, inc) х2 (18)

V8 – sc in each loop (18)

Cut the thread, leaving a long end for sewing. Stuff while sewing.

EARS (x2)

V1 – 6 CH (6)

V2 – from second loop from hook: 5 sc (5)

V3 – V6 – CH, turn, sc in each loop (5)

V7 – CH, turn, dec, 3 sc (4)

V8 – CH, turn, dec, 2 sc (3)

V9 – CH, turn, dec, 1 sc (2)

Tie piece sl-st. Cut the thread, leaving a long end for

sewing.

TAIL

V1 – 3 sc in MAGIC RING (3)

V2 – inc, 2 sc (4)

V3 – inc, 3 sc (5)

V4 – inc, 4 sc (6)

V5 – V7 – sc in each loop (6)

V8 – inc, 5 sc (7)

V9 – V11 – sc in each loop (7)

V12 – inc, 6 sc (8)

V13 – V19 – sc in each loop (8)

V20 – inc, 7 sc (9)

V21 – 6 sc (6)

V22 – CH, turn, 6 sc (6)

Cut the thread, leaving a long end for sewing.

Facebook Group: Crochet.pinto.live

Facebook Offical Page: Crochet.pinto.live

We bring you all kinds of sharing about Amigurumi. In this article we are waiting for you from each other beautiful amigurumi dog free patterns.

TOOLS AND MATERIALS

1. Yarn Art Jeans brown (40), blue

(14), beige (07), lettuce (29) and milk (03)

flowers. A little gray yarn for buckle.

2. Filler – holofiber;

3. Hook number 2;

4. Screw eyes 7 mm;

5. Felt 1.5 mm brown and blue;

6. Plastic buttons for decor;

7. Cardboard for insoles;

8. Sewing thread in brown and black;

9. A large needle for stitching.

Abbreviations:

ch -chain

sc – single crochet;

BLO – back half loop;

inc – increase (two columns from one);

dec – decrease (two columns together).

LEGS

We start with a brown thread

1 row – 10 ch + 1 ch

2 row – 9 sc, 5 sc in 1 loop, 8 sc, inc (24)

3 row – inc, 8 sc, 5 inc, 8 sc, 2 inc (32)

4th row – 1 sc, inc, 8 sc, (1 sc, inc) * 5, 8 sc, (1 sc, inc) * 2 (40)

5 row – 2 sc, inc, 8 sc, (2 sc, inc) * 5, 8 sc, (2 sc, inc) * 2 (48)

6 row – (7 sc, inc) * 6 (54)

On the resulting sole, cut out the insoles

LEGS

Change the thread to blue,

we knit the 7th row for BLO.

7-11 row – 54 sc

 Insert insoles

12 row – 8 sc, (2 sc, dec) * 8, 14 sc (46)

13 row – 46 sc

14th row – 8 sc, (1 sc, dec) * 8, 14 sc (38)

15 row – 38 sc

16 row – 8 sc, 8 dec, 14 sc (30)

17 row – 30 sc

18 row – (3 sc, dec) * 6 (24)

19 row – 24 sc

 We fill

LEGS

Change the thread to beige,

We knit the 20th row for BLO

20-21 row – 24 sc

22 row – (2 sc, dec) * 6 (18)

23-25 ​​row – 18 sc

26 row – (2 sc, inc) * 6 (24)

27-29 row – 24 sc

30 row – (3 sc, inc) * 6 (30)

31-40 row – 30 sc.

Finish knitting

cut the thread. We fill.

 LEGS

Next, we return to the 20th row associated for BLO. We find

the first column of the row, attach the blue thread.

1-2 row – 24 sc.

Change the thread to brown.

3 row – 24 sc.

Finish knitting, hide the thread.

LEGS

We return to the 7th row, which we knitted for BLO. Find the last column of the row,

we attach the brown thread and tie the sole with half columns without

nakida (ss), hide the thread. We embroider the shoelaces. Similarly

we knit the second part. At the completion of the second leg the thread

do not cut.

BODY

On the second leg, type 3 ch and connect the legs together sc. We put a marker in this place, this will be the beginning of the row.

41 row – 66 sc (30 sc along the 1st leg + 3 sc along the chain, 30 sc along

2nd leg + 3 sc in the chain)

BODY

42-44 row – 66 sc 60 row – (5 sc, dec) * 6 (36)

45 row – (9 sc, dec) * 6 (60) 61-62 row – 36 sc

46-48 row – 60 sc 63 row – (4 sc, dec) * 6 (30)

49 row – (8 sc, dec) * 6 (54) 64-65 row – 30 sc

50-51 row – 54 sc 66 row – (3 sc, dec) * 6 (24)

Change the thread to salad 67 row – 24 sc

52 row – 54 sc Change the thread to dairy,

53 row – (7 sc, dec) * 6 (48) The 68th row is knitted for BLO.

54-56 row – 48 sc 68 row – 24 sc

57 row – (6 sc, dec) * 6 (42) 69 row – (6 sc, dec) * 3 (21)

58-59 row – 42 sc 70 row – 21 sc.

Finish knitting, cut the thread,

leaving a long end for stitching.

BODY

We knit a collar. To do this, we return to the 68th row associated for BLO. We knit this row cn, leaving 2 loops in the center untied. Hide the thread.

BODY

Next, we knit the belt with a brown thread.

1 row – 55 ch we close in the ring with the help of ss.

2 row – 1 ch, 55 sc, ss.

Cut the thread, leaving a long end, sew.

We knit a buckle with a gray thread.

1 row – 12 ch we close in the ring with the help of ss.

2 row – 1 ch, (2 sc, 3 sc in 1) * 3, 2 sc, 2 sc in 1, ss.

Cut the thread, leaving a long end, sew.

To make a butterfly, take a blue felt, cut it out

from it an elongated oval, we pull it together in the middle with a blue thread, sew it to the body.

Decorate the body with buttons. Embroider sewing

brown thread pockets and fly.

BODY

PENS

We start with a milky thread

1 row – 6 sc into magic ring 12 row – (4 sc, dec) * 3 (15)

2 row – 6 inc (12) 13 row – 15 sc

3 row – (3 sc, 3 inc) * 2 (18) Change the thread to salad

4th row – (5 sc, inc) * 3 (21) 14th row – 15 sc

5 – 7 row – 21 sc 15 row – 15 sc per BLO

8 row – (5 sc, dec) * 3 (18) 16 – 34 row – 15 sc

9 – 11 row – 18 sc

Connect the edges with single crochet. Back to

15 row associated for BLO. Find the last column of the row,

attach the thread and tie a row with double crochets.

Finish knitting, hide the thread. We knit the second part in the same way. Sew hands to our torso.

PENS

HEAD

1 row – 6 sc into magic ring

2 row – 6 inc (12)

3 row (1 sc, inc) * 6

4 row – (2 sc, inc) * 6 (24)

5 row – (3 sc, inc) * 6 (30)

6 row – (4 sc, inc) * 6 (36)

7 row – (5 sc, inc) * 6 (42)

8 row – (6 sc, inc) * 6 (48)

9 row – (7 sc, inc) * 6 (54)

10-17 row – 54 sc

18 row – (8 sc, inc) * 6 (60)

19 row – (9 sc, inc) * 6 (66)

20-22 row – 66 sc

Insert the eyes between 17 and 18

in rows, leaving 7 sc between them

23 row – (9 sc, dec) * 6 (60)

HEAD

23 row – (9 sc, dec) * 6 (60)

24 row – (8 sc, dec) * 6 (54)

25 row – (7 sc, dec) * 6 (48)

26 row – (6 sc, dec) * 6 (42)

27 row – (5 sc, dec) * 6 (36)

28 row – (4 sc, dec) * 6 (30)

29 row – (3 sc, dec) * 6 (24)

30 row – (2 sc, dec) * 6 (18)

31 row – (1 sc, dec) * 6 (12)

32 row – (6 dec) * 6 (6)

We tighten the hole, hide

a thread. Make a little tightening

peephole, sew a speck of

felt, embroider the eyebrows.

DRAWING

Muzzle

1 row – 6 sc into magic ring

2 row – 6 inc (12)

3 row – (3 sc, 3 inc) * 2 (18)

4th row – (3 sc, (1 sc, inc) * 3) * 2 (24)

5 row – (3 sc, (2 sc, inc) * 3) * 2 (30)

6 row – 30 sc

Sew the muzzle to the head,

fill the sewing trip. We embroider a nose.

EARS

1 row – 6 sc into magic ring 9 row – (3 sc, dec) * 6 (24)

2 row – 6 inc (12) 10 row – 24 sc

3 row – (1 sc, inc) * 6 (18) 11 row – (10 sc, dec) * 2 (22)

4th row – (2 sc, inc) * 6 (24) 12th row – 22 sc

5th row – (3 sc, inc) * 6 (30) 13th row – (9 sc, dec) * 2 (20)

6-8 row – 30 sc 14 row – 20 sc

EARS

Connect the edges with single crochet. We knit the second part in the same way. Cut ears from felt, sew to knitted

and sew to the head as you like. Me this time

I wanted to make both ears brown side inward) Who

not yet sewn his head – it’s time to do it =)