ABBREVIATION used in the template: 

SC ——– single crochet 

inc ——— incraise / 2SC in 1 loop 

INC3 ——– double incraise / 3SC in 1 loop 

DEC3 ——— double decrease / 3SC knit 1 loop 

DEC ——— decrease 

DC ——– double crochet 

INC-DC —— double crochet incraise 

CH———–chain 

* ——- Repeat the instructions in parentheses the specified number of times 

Stitch marker — Mark the beginning of the row 

MATERIALS 

 Kartopu thread KOD: K1219 (THREAD IS NOT PRODUCED) – for a 2.5 mm crochet hook (instead of Kartopu thread you can use LANOSO ALARA COTTON KOD: C: 937-P: 144 or another thread. The hook should be thinner than indicated on (See yarn instructions.) 

• Threads Gazzal baby coton white – CODE: 3432 (for diapers) – hook 2.0 mm. 

• Red Gazzal baby coton – CODE: 3439 (for clothes) (For bow and blouse, you can use another thread, equivalent to gazzal, which will be thinner than the thread for the body). 

• 12 mm safety eyes in brown color. 

 Filler 

• Wire (for the doll frame) 

• Adhesive plaster (to cover the ends of the wire) 

 Tessa (finished hair) 

• Ready-made eyelashes for the doll and black sewing thread for sewing. 

• Pink thread for lip embroidery. 

• Brown thread for eyebrow embroidery (the thread used for the doll is alize diva) 

DOLL’S GROWTH 27-30 CM. DOLL SIZE MAY BE REFERRED FROM THE ORIGINAL DEPENDING ON THE THREAD AND DENSITY. 

HANDS 

1) Into magic ring 6SC 

2) 6INC = 12SC 

3) 4 * (INC, 2SC) = 16SC 

4-6) 16SC (3 rows) 

7) 1 Popcorn, 15SC 

8) 16SC 

9) over the finger (DEC, 6SC) * 2 = 14SC 

10-24) 14SC, 1 DC finish. (15 rows) (place wire in it and stuff with fiber.) 

At the end of the second hand, knit another 4SC, 1DC and cut off the thread. The pollen on the hand should be inside, on the first hand we do not tie 4SC. 

FOOT (LEFT FOOT) 

1) Into magic ring 6SC 

2) SC, INC (7SC in total) Tighten the loop and knit a chain of 7 CH, skip 1 CH and start at 2 from the hook (along the 6SC chain, 7SC on the finger, 6SC on the chain) = 19SC 

3-7) 19SC (5 rows) 

8) We knit the heel. 

1SC turn, 9SC turn, 8SC turn, 7SC turn, 6SC turn, 5SC turn, 4SC. At the beginning of each row, we skip 1 stitch, due to this, a decrease will be obtained. 

9) We tie the foot in a circle. When you get to the front knit 7DC = 19SC 

Foot harness: 3SC, DEC, 7DC, DEC, 3SC (decrease should be in the corners) 

Set a stitch marker. 

10-20) 19SC (11 rows) 

21) For the knee, we knit 4 additions in the front, if necessary, knit SC to these loops; (Knee: 11SC, 4INC, 4SC = 23SC) 

22) To form the knee, we knit 4 decreases. (Knee: 4DEC, 15SC = 19SC) 

23) 19SC 

24) To tie a beautiful leg, in the 22nd row, knit 4 presses from behind, if required, knit SC to these loops. (Explanation: 4INC, 15SC = 23SC) 

25-31) 23SC (7 rows) 

32) 1DC cut and hide the thread. (The connection of the two legs will be done with a thread from the right leg.) 

Squeeze out the right leg 

The only difference between knitting the left foot from the right is the 8th row. 

We knit 11SC in Row 8 (this is needed to adjust the direction of the finger.) 

Then we turn and knit 9SC turn, 8SC turn, 7SC turn, 6SC turn, 5SC turn, 4SC. 

1) Into magic ring 6SC 

2) SC, INC (total 7SC) we knit a chain of 7 CH, start with 2CH from 

hook. 6SC chained, 7SC finger, 6SC chained = 19SC 

3-7) 19SC (5 rows) 

8) We knit the heel. 

11SC turn, 9SC turn, 8SC turn, 7SC turn, 6SC turn, 5SC turn, 4SC. 

9) We tie the foot in a circle. When you get to the front, knit 7DC = 19SC Foot harness: 3SC, DEC, 7DC, DEC, 3SC (decrease should be in the corners). 

10-20) 19SC (11 rows) 

21) For the knee, we knit 4 additions in the front, if required, knit SC to these loops; (Knee: 11SC, 4INC, 4SC = 23SC) 

22) To form the knee, we knit 4 decreases. (Knee: 4DEC, 15SC = 19SC) 

23) 19SC 

24) To knit a beautiful leg, in the 22nd row, knit 4INC from the back, if necessary, knit SC to these loops. (Explanation: 4INC, 15SC = 23SC) 

25-31) 23SC (7 rows) 

32) In this row, the legs will be connected. Do not cut the thread. This will be 1 body row. 

WE KNIT THE BODY 

1) Continue along the right leg 11SC, 2 CH (knit DC into the left leg), along the left leg 23SC, along the chain 2SC, along the right leg 12SC, put a marker – this will be the beginning of a new row = 50 SC (The beginning of the row will be from that place , which is marked with a red thread on the doll’s right leg.) 

2) 16 INC should be located at the back of the doll, strictly in the middle. 

In the front we will knit INC, SC repeat 5 times, create a tummy. 

Explanation: 4SC, 16INC, 13SC, 5 * (INC, SC), 7SC = 71SC 

3-9) 71SC (7 rows) 

10) Shaping the ass. We knit decrements. 

Explanation: 3SC, 4 * (SC, DEC), 10 SC skip, 4 * (SC, DEC), 34 SC = 53SC 

(In other words, 8 decreases will be connected by 4 to the right, 4 to the left. We knit exactly along the stomach.) 

11) 53SC 

12) We knit a row with decreases. 

Explanation: 3SC, 6 * (DEC, SC), 32SC = 47SC 

(2.Sew skipped loops in flesh.) 

13) 47SC 

14) 27SC, 4 * (DEC, SC), 6SC, DEC = 42SC 

14) 18SC, DEC, 20SC, DEC = 40SC 

15) (Subtraction left and right) 17SC, DEC, 19SC, DEC = 38SC 

16) (Subtraction left and right) 17SC, DEC, 17SC, DEC = 36SC 

17) (Subtraction left and right) 16SC, DEC, 17SC, DEC = 34SC 

(Since the last decrease corresponds to the last stitch of the row and the first stitch of the next row, the offset is 1 stitch.) 

19-21) 34SC (3 rows) 

22) We knit hands. Hands are tied in 3 stitches, indicated by pins in 1 photo below. Start by tying in the right arm 3SC arm + body, 14SC, 3SC left arm + body, 13SC, 1DEC (Decrease, can go to the beginning of the 23rd row.) = 34SC 

23. From here we begin to knit by decreasing between the hand and the body, we knit the shoulder. 

The first decrease coincides with the last stitch of row 22 and the beginning of row 23. 

23) In this row, we make 4 decreases in the corners of the arms = 46SC 

Explanation: DEC (Use a 22nd stitch), 9SC, DEC, 12SC, DEC, 9SC, DEC, 12SC = 46SC 

24) Decrease at the corners of the arms = 42SC 

Explanation: DEC, 7SC, DEC, 12SC, DEC, 7SC, DEC, 12SC = 42SC 

25) Decrease at the corners of the arms = 34SC 

Explanation: 2DEC, 2SC, 2DEC, 11SC, 2DEC, 2SC, 2DEC, 11SC = 34SC 

26) In the shoulder area, knit 3SC together. Reduce total by 4 stitches = 30SC (the middle of the shoulder is indicated with a black pin in the photo.) 

Explanation: SC, DEC3, 14SC, DEC3, 13SC = 30SC 

27) In the shoulder area, knit 3SC together. Decrease total by 4 stitches = 26SC 

Explanation: 2 * (DEC3, 12SC) = 26SC 

28) In the shoulder area, knit 1 decrease = 24SC 

Explanation: 2 * (DEC, 11SC) = 24SC 

29) Each side will be reduced by 1 stitch, and we knit a decrease on the last two stitches (we make a decrease in the last two loops of this row, since a shift occurs when decreasing.) = 21SC 

Explanation: DEC, 10SC, DEC, 8SC, DEC = 21SC 

30) We will decrease one side by 1 stitch (because the decrease was made on the last stitch of the 29th row), on the other hand, we will knit 2 decreases = 18x (finish and leave the long one to sew on the head). = 18SC Explanation: DEC, 7SC, 2DEC, 9SC, 1DC = 18SC (Here at the end we knit 9SC so that DC is on the side. So that the end of the thread comes out from the side of the head. If it is in the front, it may not look neat when sewing on the head.) 

HEAD 

1) Into magic ring 6SC 

2) 6INC = 12SC 

3) 6 * (SC, INC) = 18SC 

4) 6 * (2SC, INC) = 24SC 

5) 6 * (3SC, INC) = 30SC 

6) 6 * (4SC, INC) = 36SC 

7) 6 * (5SC, INC) = 42SC 

8) 6 * (6SC, INC) = 48SC 

9) 6 * (7SC, INC) = 54SC 

10) 6 * (8SC, INC) = 60SC 

11-18) 60SC (8 rows) 

19) We make a decrease on the front part. (The pins show the places where the subtraction is made). The eye will be inserted between 19-20 rows with 6 stitches between them. 

Explanation: 17SC, 6 * (DEC, 2SC), 19SC = 54SC 

20) From this row we knit 6 additions over the face. 17SC, 6 * (INC, 2SC), 19SC = 60SC 

21) Cheeks; We knit 8 additions, 4 on one side and 4 on the other side of the nose. The additions begin before the first increase of 20 rad. 17SC, 4 * (INC, SC), 3SC, 1POPcorn (3 DC in 1 loop), 4SC, 4 * (INC, SC), 19SC = 68SC 

22-27) 68SC (6 rows) 

28) We make a reduction for the formation of the cheeks, in those places where we knitted the additions. 4 for the left cheek, 4 for the right cheek with 8 stitches. 17SC, 4 * (DEC, SC), 8SC, 4 * (DEC, SC), 19SC = 60SC 

29) 6 * (DEC, 8SC) = 54 

30) 6 * (DEC, 7SC) = 48 

31) 6 * (DEC, 6SC) = 42 

32) 6 * (DEC, 5SC) = 36 

33) 6 * (DEC, 4SC) = 30 

34) 6 * (DEC, 3SC) = 24 

35) 6 * (DEC, 2SC) = 18 DC cut the thread. 

HEAD; AFTER FITTING THE EYE, EMBROIDERY OF THE Mouth, WE SEW THE HEAD TO THE NECK. 

EYES: 12 mm. BETWEEN ROWS 19 and 20 BELOW, 6 STITCHES BETWEEN TWO EYES. 

Attach the eyes without filling the inside of the head. We will not make an eye-tightening, as we knitted the shape of the head, taking into account the eyes. 

A thorough filling is required when filling the head. Fill your cheeks especially beautifully. If you fill too tight, you will stretch the fabric of the head and it will not be pretty, if you fill not tightly, rounded lines such as the cheeks will lose their contours. 

After attaching the eyes to the head and filling the head with fiber, before sewing the head to the body, we perform processes such as eyebrow embroidery and eyelash gluing. 

EYEBROWS: We start with the 16th row. 

We use a long needle for eyebrow embroidery, this will make your work easier. As in Figure 1, we pass the needle through the neck cavity, which we left open for sewing on the head, and draw the needle out 1 row above the eyes. We embroider the first eyebrow after 4 stitches diagonally across the row, as in picture 2, and move on to the second eyebrow. In Figure 4, we tie the two ends of the yarn in a knot after embroidering the ribs. Be careful when tying the knot, if you tighten too tightly, your eyebrows will look tight and not pretty. 

ADHESIVE EYELASHES 

Cut the finished eyelash for dolls into 2 parts. It can be cut by about 1 cm, but it depends on your preference. To make the lashes thick, I make two layers, so I cut out 4 pieces for both eyes. Sew on the eyelash with a thin black sewing thread or ghost thread and a fine needle. Pay attention to the direction of the cilia. They should be curved from the eye to the brow. 

Sewing on eyelashes can be a little tricky. After sewing on the eyelashes with a flesh-colored thread, we embroider the eyelid above the eyelashes (do this right at the top of the eye, otherwise the eyelash will not rise). This makes the lashes more beautiful and tidy, and the thread looks like an eyelid. 

MOUTH: First, we define the places for the mouth. We define it at the level of the nose with an interval of 2 stitches between the 27th and 28th rows. 

PREPARATION: Insert the needle into the crown of the head, as in Figure 1. You just leave the long end of the thread at the top of the head to tie it later. We withdraw the needle through the previously determined place for the mouth. As in Figure 2, we bring the needle out to the left, skipping 2 stitches, and out the top of the head. Do not withdraw the needle in the same place where the needle was inserted. As in Figure 3, we tighten the thread to form the mouth and tie the two threads well. At the last stage, we hide the ends of the threads inside the head so that they are not visible. This can be done with a needle. If a dimple appears on the head, it’s okay, since the head will be covered with hair. 

Ears: Sew BETWEEN 20 AND 23 ROWS. There should be 6 stitches in the middle of the eye, between the eye and the ear. First knit 5SC into magic ring. Leave both ends of the thread long. Sew on the ear, as in the Figure, using a needle. 

Thread one end of the thread through the needle. Insert the needle from top to bottom, and work out 3 rows below. Bring the second thread to the bottom of the ear and tie a small knot here. Hide the threads in your head. 

DIAPER

(White GAZZAL threads, hook 2.00mm) 

 We knit the diaper in additions and decreases. 

 We knit in rotary rows. 

1) Beginning with a chain of 57 CH with 2CH from the hook, knit 56SC. 

2-5) 56SC (4 rows.) (At the end of each row, knit 1CH and turn the work.) 

6) 9 DC 1 CH, 36SC, 1 DEC, (At the end of each row, knit 1CH and turn the work.) Note: Also, do the decrease at the beginning of the row.) 

7) Skip 1st and start knitting at 2nd loop (Repeat this process up to row 15 at the beginning of each row.) 34SC, 1 DEC 

8) 32SC, 1 DEC = Total 33SC 

9) 30SC, 1 DEC = 31SC 

10) 28SC, 1 DEC = 29SC 

11) 26SC, 1 DEC = 27SC 

12) 1 DEC, 20SC, 2 DEC = 23SC 

13) 1 DEC, 16SC, 2 DEC = 19SC 

14) 1 DEC, 12SC, 2 DEC = 15SC 

15) 1 DEC, 8SC, 2 DEC = 11SC 

16-26) 11SC (11 rows) 

27) 1 INC, 9SC, 1INC = 13SC 

28) 1 INC, 11SC, 1 INC = 15SC 

29) 1 INC, 13SC, 1 INC = 17SC 

30) 1 INC, 15SC, 1 INC = 19SC 

31) 8 CH, with 2 CH from the hook. (on the left, fasten the thread and knit 8CH and tighten the thread.) Continue knitting from right to left. In total, you should get 33SC. 

(EXPLANATION: 19 SC, 7SC on one side of the chain and 7 SC on the other side of the chain = 33 stitches.) 

32-36) 33SC 

37) Tie the entire diaper (2CH, 1DC) in each loop (the goal is to make the panties look pretty). We knit in each loop, we knit in the corner twice. 

IT IS POSSIBLE TO MAKE THE EMBROIDERY ON THE PANTS. 

If your yellow thread is thick, you can split it into multiple threads for embroidery. We embroider in each stitch, in the shape of the letter X. It would be better if you first practice on the pattern and then embroider the X on the panties. 

You can embroider any design you like. Unfortunately, I cannot explain my embroidery. First, I drew it with a pencil and embroidered it with thread. The X-shaped embroidery is made with yellow thread only. 

The buttons will be sewn with a sewing needle to open and close the panties. 

Velcro can also be used if desired. Look at the images, determine the location of the buttons and sew them on. The buttons have two parts. 1 part will be sewn to the top of the panties, and the other part to the bottom of the panties, as in the photo below. 

If you are going to sew on Velcro, you should sew on the Velcro with white sewing thread as shown below. 

We sew the velcro to the inside of the panties, and sew the sticky part to the chanterelles. Look at the picture. 

BLOUSE

(RED THREAD GAZZAL, HOOK 2.00mm) 

1) 49 CH, with 2CH from the 48SC hook. (1 CH and turn) 

2) 48 DC (2 CH and turn) 

3) From the front of the stitch, work 48 INC-DC into each stitch. (2 CH and turn) 48INC-DC = 96SC 

4) 48SC (At the end of the row we knit a chain of 6 CH and then turning the work we knit 1SC in the next row. Loop.) 

5) 48SC 

6) 48 DC 

7) For the front wall of the loop, knit 48 INC-DC. (At the end of the row we knit a chain of 6 CH and then turning the work knit 1SC in the next row. Loop.) 

8) 6Return to the stitches of the 6th row and knit behind the back wall of the stitch. 

7SC, 12 CH, 10 stitches skip, 14SC, 12 CH, 10 stitches skip, 7SC. (We knit the arm straps.) 

9-19) 52SC (At the end of the 17th row, we knit a chain of 6CH.) (11 rows) 

20) 3 CH, skip 1 stitch and knit 1DC into the next loop, knit to the end of the row. 

The buttons are sewn directly on against the buttonholes. 

FASTENING THE HAIR TO THE HEAD For amigurumi, ready-made hair (tress) will be used, 1 meter will be enough. The baby’s hair is short. To do this, the long wefts must be cut. About 10 cm of hair is enough. It is better to trim already on the head, after fastening. 

Sew on the hair in a spiral. 

Sew on the hair, twisting it in a spiral, as in the image. 

After the hair is completely sewn on, we do the hairstyle. Take your hair with both hands, rub it lightly in your palms and tousle it. Then we sew a fishing line by the hair, in a semicircle (you can use a sewing thread, only the stitches will be visible) The front part of the hair is not sewn. If your hair stands on end, then attach your hair to your head and wrap it with salofan and dip your head in hot water, the hair will fall around the head. (The longer the hair, the easier it is to shape as it is steamed.) If the hair is too long, cut it.) 

WE KNIT BANDANA 

Begin with a chain of 12CH, with 3CH from hook, work 10DC, 3CH turn. 

We knit until the full head circumference, I got 38 rows. Next, sew with a needle, and pull to the middle. 

EXPLANATION: 12 CH, with 3 CH from the hook, 10DC (38 Rows) 

For a bow; 19 CH turn, with 3 CH from the 17 DC hook. Work 10 rows. Next, tie the entire piece in a circle. 3CH, skip 1 stitch 1DC into next stitch. 

Pull the thread in the middle and sew to the bandana. 

The finished bow should look like the image, and secured with a bandana thread. 

Additional description of the baby with knitted hair and embroidered eyelashes 

The difference with this baby is that we do not use ready-made hair and eyelashes. 

If you don’t have tresses or are difficult to sew, you can tie 6 curly strands of hair with Alize diva, as shown in the image. 

Too many strands can make a child look more like an adult. The choice is yours. 

Hair; 1) 26 CH, with 2CH from the hook, in each loop we knit INC, SC to the end of the chain. 2) Again we dial 26 CH, with 2CH from the hook. (In total, repeat 6 times, you should get 6 strands) 

You can change the amount of CH from 26 to 30. The curls will be short or long. 

Sew the hair to the hole where you tightened the thread when tightening. 

If you don’t have ready-made eyelashes, you can embroider them with floss. The eyelash is embroidered with black thread, and the thread that we run along the top of the eye is a dark brown alize diva thread. 

We will embroider eyelashes, on the side of the eye at 18-19 rad. Determine the number of eyelashes yourself, according to your desire. At the end, be sure to make up the baby’s cheeks. 

Materials 

Himalayan Deluxe bamboo for her skin: 124 

I used gazzal baby cotton on other parts. 

Hair. For nako bonbons 

12 mm brown eye 

2mm crochet 

Wire for crown making 

I used yogurt container for shoe sole 

Button Codes: gazzal baby cotton White: 3432 Fusya: 3415 Water green: 3425 

TERMS USED. 

Mr: magic ring 

sc: single crochet 

dec: decrease 

inc: increase 

sl-st: slip-stitch 

hdc: half double crochet 

PATTERN DOLL 

Hand-arm 

1) Magic ring 6sc 

2) 6inc = 12sc 

3) 1inc, 5sc, 1inc, 5sc = 14sc 

4-5-6) = 14sc 

7) 3sc, 1dec, 9sc = 13sc 

8) = 13sc 

9) 2sc, 1dec, 5sc, 1dec, 2sc = 11sc 

10) 4sc, 1dec, 3sc, 1dec = 9sc 

11) = 9sc 

12) 1inc, 3sc, 1inc, 4sc, = 11sc 

13-14-15-16-17) = 11sc 

18) 1inc, 5sc, 1inc, 4sc = 13sc 

19-37) = 13sc 

Foot 

1) 8 ch check 2. ch from the same hole 3sc, 5sc, same hole 3sc, 5sc = 16sc 

2) 3inc, 5sc, 3inc, 5sc = 22sc 

3) (sc, inc) * 3, 5sc, (sc, inc) * 3, 5sc = 28sc 

4) (2sc, inc) * 3, 5sc, (2sc, inc) * 3, 5sc = 34sc 

5-6-7-8) (4 rows) = 34sc 

9) 14sc, (sc, dec) * 6, 2sc = 28sc 

10) 2sc, (sc, dec) * 2, 6sc, 6dec, 2sc = 20sc 

11) dec, 7sc, dec, sc, 3dec, 2sc = 15sc 

12) = 15sc 

13) (3sc, inc) * 2, 6sc, inc = 18sc 

14) = 18sc 

15) = 18sc 

16) (4sc, inc) * 3, 2sc, inc = 22sc 

17) 22sc BLO = 22sc with skin color 

18-29) (12 rows) = 22sc 

30) 8sc, 2dec, 8sc, 2inc = 22sc 

31-32) = 22sc 

33) 9sc, 2inc, 7sc, 2dec = 22sc 

34-43) (10 rows) = 22sc 

44) 8sc eg (we’re putting the marker here) skip to white rope 22sc BLO = 22sc 

45) = 22sc 

46) Note: In this way, weave two legs and pull 45th row 11sc on the second leg, eg 4 ch and connect the other leg from the bit work = 52sc (total 52sc) marker here. 

47) 4sc, inc, (5sc, inc) * 2, 14sc, (inc, 5sc) * 2, inc, 8sc = 58sc 

48-52) (5 rows) = 58sc 

53) 13sc, dec, 28sc, dec, 13sc = 56sc 

54-55-56 (3 rows) = 56sc 

57) Switch to skin color BLO eg = 56sc 

58) 27sc, dec, 25sc, dec = 54sc 

59) = 54sc 

60) = 54sc 

61) (7sc, dec) * 6 = 48sc 

62-63-64-65) (4 rows) = 48sc 

66) (6sc, dec) * 6 = 42sc 

67-70) (4 rows) = 42sc 

71) 14sc, (inc, 3sc) * 6, 4sc = 48sc 

72-74) (3 rows) = 48sc 

75) 16sc, dec, 5sc, 2dec, 3sc, 2dec, 5sc, dec, 7sc = 42sc 

76) = 42sc 

77) = 42sc 

78) (5sc, dec) * 6 = 36sc 

79) = 36sc 

We combine arms 

80) 5sc from 12sc arm and body eg. 12sc front, 5sc from arm and body, 2sc = 36sc 

81) 12sc, arm 8sc, front 12sc, arm 8sc, 2sc = 42sc 

82) = 42sc 

83) (5sc, dec) * 6 = 36sc 

84) (4sc, dec) * 6 = 30sc 

85) (3sc, dec) * 6 = 24sc 

86) (2sc, dec) * 6 = 18sc 

87-88-89-90-91 (5 rows) = 18sc 

HEAD 

1) Magic ring = 6sc 

2) Always increase. = 12sc 

3) 1sc 1inc = 18sc 

4) 2sc 1inc = 24sc 

5) 3sc 1inc = 30sc 

6) 4sc 1inc = 36sc 

7) 5sc 1inc = 42sc 

8) 6sc 1inc = 48sc 

9) 7sc 1inc = 54sc 

10) 8sc 1inc = 60sc 

11) 9sc 1inc = 66sc 

12-23) 12 rows = 66sc 

24) 20sc, 6inc, 10sc, 6inc, 24sc = 78sc 

25-30) 6 rows of straight eg = 78sc 

31) 11sc 1dec = 72sc 

32) 10sc 1dec = 66sc 

33) 9sc 1dec = 60sc 

34) 8sc 1dec = 54sc 

35) 7sc 1dec = 48sc 

36) 6sc 1dec = 42sc 

37) 5sc 1dec = 36sc 

38) 4sc 1dec = 30sc 

39) 3sc 1dec = 24sc 

40) 2sc 1dec = 18sc 

FINISH IT. 

A 7 sc gap is left between 28 and 29 rows, and the nose is processed between 23 and 24 rows. Eyes are inserted with 11 rows of space between 20 and 21 rows (7 rows sc appear in between) 

SKIRT 

1) We pull 53 +8 chains. We’re sinking into the 9th chain. We’re doing 53sc. 

2) 1 chain = 53sc 

3) Chain = 53sc 

4) Chain = 53sc 

5) Combine with 1 chain = 53sc sl-st. 

6) We make each loop of DCV to the end of the sequence. 

7) 1 DC to 1 DCV sequence to the end 

8) 9) 10) 11) 12) We are making dc weave flat. 

BLOUSE 

We’re pulling 33 + 7 chains. 8. Bat to the chain. 

1) 5DC, (1DC into the same chain with 2 chains LDC) 

5DC, (1DC into the same chain 2 chains 1DC) 

9dc, (1dc into the same chain 2 chains 1dc) 

5DC, (1DC into the same chain 2 chains 1DC) 

5 dc. 

2) Return 2 chain check. 

6 dc into 2 chains (1 dc 2 chains 1dc) 

7dc into 2 chains (1dc 2 chains 1dc) 

11dc into 2 chains (1dc 2 chains 1dc) 

7dc into 2 chains (1dc 2 chains 1 dc) 

6dc. 

3) Return 2 chain pull. 

7dc into 2 chains (1dc 2 chains 1dc) 

9dc into 2 chains (1dc 2 chains 1dc) 

13dc into 2 chains (1dc 2 chains 1dc) 

9dc into 2 chains (1dc 2 chains 1dc) 

7dc. ‘. 

4) 2 chain check to top: 

8DC into 2 chains of 2 DC, 

Pull 3 chains, jump 11sc, 2 dc into 2 chains, 

15 dc, 2 dc into 2 chains 

Pull 3 chains 11sc jump 2 chains into 2 dc 8dc 

5) 7 Chain Check Return 9 DC, 1 DCinc ARM We combine 3 chains into 3DC, 1dcinc, 17dc, 1dcinc, 3dc (into 3chains), 1dcinc, 9dc = 49dc 

6) 11dc 1dcv = 53dc 2 chain check turn 

7) 12 dc 1dcv = 57dc 2 chain check turn 

8) 57dc 

9) 7 chain check top = 57 dc 

10) 3 chain pull back 2 dc in between 3 to 3. continue until the end of the bat. 3chain pull 2 space drop 3.bat 

11) 2 chain pull back 3 dc 6 dc into the chain where we do the needle stitch slide. 6 dc into 3 chains 6 dc 

12) 2 chain pull back. We draw 2 chains to each of 6 dc and make 1 dc to each dc. 2 chains 1 dc 

13) Pull 2 chains back and pull 2 chains into each space and sink. between the frequent needle stitches are scrolling. over. 

CROWN 

2 pieces of knitting 

1) magic ring 6sc 

2) Always increase = 12sc 

3) 1sc 1inc = 18sc 

4) 2sc 1inc = 24 sc 

5) -11) = 24 sc 

12) 2sc 1dec = 18sc 

13) -16) = 18sc 

17) 1sc1dec = 12sc 

18) = 12sc 

we measure and cut the wire according to our baby’s head. we wrap the outside with a tape. We will leave the beer rope at the ends and then wrap them with the help of silicone. we make frequent needles around it. then we wear the ears as in the picture. I’ve used ready-made flowers you can put yourself in knitting. 

SHOE 

1) Pull 9 chains 2. Start from the same dense needle 3sc, 6sc, the same dense needle 3sc to the opposite side Skip the first chain 6sc, sl-st, stitch shift = 18sc sl-st 

2) 3inc, 6sc, 3inc, 6sc = 24sl-st 

3) (sc, inc) 3,6sc, (1sc 1inc) 3,6sc = 30sl-st 

4) (2sc 1inc) 3,6c (2sc 1inc) 3,6c = 36sl-st 

We combine 2 soles, 2 soles for 2 shoes as shown in the picture. then you’re going to the top of the front side of the reduction should do. rope base at the base of the sl-st we do that we’re wearing. 

5) -9) 5 rows = 36sc sl-st 

19sc, 1dec, (1sc 1dec) 5, 3sc = 31sc sl-st 

18sc, 5dec, 3sc = 26 sc sl-st 

The reductions will come to the front of the shoe. 

For lacing: 15 chain pull 8 from 8 sc or perpendicular to the shoe. 

bow: magic ring 3 chain 2 dc 3 chain bat 3 chain 2 dc 3 chain bat close. 

Materials

 Yarn. I used Schachenmayr Catania Originals

 2,5 mm crochet hook

 Polyester fiberfill for stuffing

 8 mm safety eyes

 Yarn needle

 Scissors

 Stitch marker

Abbreviations;

sc: Single crochet

inc: Increase

W: 3 single crochet in one stitch

dec: decrease

DC: Double Crochet

Ch: Chain

Magic ring: Magic ring

BLO: Back loop only

FLO: Front loop only

PATTERN

Legs * 2

With violett

1) Chain 7 and starting with second chain from the hook; İNC, 4sc, W, 5sc (14)

2) 2İNC, 4sc, 3inc, 4sc, inc (20)

3) 8sc, (1İNC, 1sc)*3, 6sc (23)

4-6) 23sc (23)

7) 8sc, (1sc, 1DEC)*4, 3sc (19)

8) 6sc, (1sc, 1DEC)*4, 1sc (15)

9) 6sc, (1sc,1DEC)*3 (12)

10) 12sc (12)

With white

11-16) 12sc (12)

17) FLO 12sc (12)

18) (1İNC, 1sc)*6 (18)

19) (1İNC, 1sc)*6 (24)

20) 24sc (24)

**Cut the yarn. Continue to leg’s colorful part with starting the 17th round as BLO.

Color change

While changing color, at the last row of color DEC, make a slip stitch. Then insert hook to same stitch and make a single crochet. At the end of the row insert the hook to last stitch of the row, yarn over and draw up a loop. Then yarn over with color B and draw through both loops. To finish the row, make a slip stitch to the first stitch of the row. For the next row, with color B, make a slip stitch. Then insert hook to same stitch and make a single crochet. From now on, continue to crochet as spiral.

Continue to legs* 2

With orange

1-5) 12sc (12)

With yellow

6-10) 12sc (12)

With apple

11-15) 12sc (12)

With jade

16-20) 12sc (12)

With white

21-22) 12sc (12)

For legs, you need to change color at every five row. So do not crochet as spiral. At firt stitches of every row make a slip stitch. Then insert hook to same stitch and make a single crochet. When you done to crochet the row, make a slip stitch to the first stitch.

Body

With white

1) 6sc in Magic ring (6)

2) 6İNC (12)

3) (1sc,1İNC)*6 (18)

4) 1sc, 1İNC, (2sc, 1İNC)*5, 1sc (24)

5) (3sc, 1İNC)*6 (30)

6) 2sc, 1İNC, (4sc, 1İNC)*5, 2sc (36)

7) (5sc, 1İNC)*6 (42)

8) 3sc, 1İNC, (6sc, 1İNC)*5, 3sc (48)

9-11) 48sc (48)

With mint

12-14) 48sc (48)

15) BLO 48sc (48)

16-20) 48sc (48)

21) 5sc, 1DEC, (10sc, 1DEC)*3, 5sc (44)

22) 44sc (44)

23) (9sc, 1DEC)*4 (40)

24) 40sc (40)

25) 4sc, 1DEC, (8sc, 1DEC)*3, 4sc (36)

26) 36sc (36)

27) (7sc, 1DEC)*4 (32)

28) 32sc (32)

29) 3sc, 1DEC, (6sc, 1DEC)*3, 3sc (28)

30) 28sc (28)

31) (5sc, 1DEC)*4 (24)

32) 24sc (24)

33) (1sc, 1DEC)*8 (16)

34) 16sc (16)

Head

Continue from the body

With soft apricot

1-3) 16sc (16)

4) (1sc,1İNC)*8 (24)

5) 1sc, 1İNC, (2sc, 1İNC)*7, 1sc (32)

6) (3sc, 1İNC)*8 (40)

7) 2sc, 1İNC, (4sc, 1İNC)*7, 2sc (48)

8) (5sc, 1İNC)*8 (56)

9-21) 48sc (56)

!!Place the eyes between the 14th and 14th rounds, leaving 9 single crochet between them.

22) (5sc,1DEC)*8 (48)

23) 2sc, 1DEC, (4sc, 1DEC)*7, 2sc (40)

24) (3sc, 1DEC)*8 (32)

25) 1sc, 1DEC, (2sc, 1DEC)*7, 1sc (24)

26) (1sc,1DEC)*8 (16)

27) 8dec (8)

!!Close the head with the help of yarn needle.

!!Emroider the nose between 12th and 13th rounds.

Skirt

with starting 15th round as FLO.

With mint

1) 48sc (48)

2) (11sc, 1İNC)*4 (52)

3) 52sc (52)

4) 6sc, 1İNC, (12sc, 1İNC)*3, 6sc (56)

5)56sc (56)

6) (13sc, 1İNC)*4 (60)

7-10) 60sc (60)

!! Make shell stitch for the border of the skirt.

You will have 15 shells at the end of the round.

Arms* 2

With soft apricot

1) 5sc in Magic ring (5)

2) 5İNC (10)

3-26) 10sc (10)

With mint

27) 10sc (10)

!! After you done to crochet all the rounds, stuff the arms and close them with 5 single crochet.

Wings* 2

With white

Small part

1) 6sc in Magic ring (6)

2) 6İNC (12)

3) (1sc, 1İNC)*6 (18)

4) 1sc, 1İNC, ( 2sc, 1İNC)*5, 1sc (24)

5-10) 24sc (24)

Big part

1) 6sc in Magic ring (6)

2) 6İNC (12)

3) (1sc, 1İNC)*6 (18)

4) 1sc, 1İNC, ( 2sc, 1İNC)*5, 1sc (24)

5) (3sc, 1İNC)*6 (30)

6-12) 30sc (30)

Continue to crochet with adding two parts together

13) 54sc (54)

14) (7sc, 1DEC)*6 (48)

15) 5sc, 1DEC, (10sc, 1DEC)*3, 5sc (44)

16) (9sc, 1DEC) *4 (40)

17) 4sc, 1DEC, ( 8sc, 1DEC)*3, 4sc (36)

18) (7sc, 1DEC)*4 (32)

19) 3sc, 1DEC, (6sc, 1DEC)*3, 3sc (28)

20) (5sc, 1DEC)*4 (24)

21) 2sc, 1DEC, (4sc, 1DEC)*3, 2sc (20)

22) (3sc, 1DEC)*3 (16)

23) 1sc, 1DEC, (2sc, 1DEC)*3, 1sc (12)

24) 6dec (12)

For hair, cut the pieces of Yarnart Happy. Fold a pieces of yarn in half. Insert the hook under a stitch, grab the center and draw up a loop. You can use your hook to draw the yarn ends through the loop. Grap the yarn tails and tug, pulling the loop tight. It is enough to add hair just to border of head, because you will make a pony tail. If you want, youcan fill the center of the head.

Material Used 

Tan Himalayan delux bamboo 

dress alize coton gold 

headband himalayan delux bamboo 

Women’s booties yarn knitting hair 

Eyes 12 mm 

Needle. 2.00mm 

HEAD 

1) 6sc into magic ring 

2) 6inc=12sc 

3)(1sc1inc)*6=18sc 

4)(2sc1inc)*6=24sc 

5)(3sc1inc)*6=30sc 

6)(4sc1inc)*6=36sc 

7)(5sc1inc)*6=42sc 

8) (6sc1inc)*6=48sc 

9) (7sc1inc)*6=54sc 

10) (8sc1INC)*6=60% 

11) (9sc1inc)*6=66sc 

12-30 66sc 

31)(9sc1dec)*6=60sc 

32)(8sc1dec)*6=54sc 

33)(7sc1dec)*6=48sc 

34)(6sc1dec)*6=42sc 

35)(5sc1dec)*6=36sc 

36(4sc1dec)*6=30sc 

37)(3sc1dec)*6=24sc 

38)(2sc1dec)*6=18% done. 

The eyes are placed between 23-24 by leaving a 9sc gap. 

FEET 

1) Pull 11 ch and from 2nd ch 1inc, 8sc, 3sc into 9th ch, 9sc to the other side of ch 

2)2inc,9sc, 2inc,9sc=26sc 

3)1inc,1sc,1inc, 10sc,1inc,1sc,1inc, 10sc=30sc 

4(1inc1sc)*2, 1inc, 10sc, (1inc1sc)*2.1inc, 10sc=36sc 

5)blo 36sc 

6-7-8=36sc 

9) 15sc, 7dec,7sc=29sc 

10)12sc,6dec,5sc=23sc 

11)10sc, 5dec,3sc=18sc 

12-21=18sc 

22) flo 18sc 

23) 18sc blo with skin color 

18sc from 24-55 and done 

Join 6 chle to the other leg without cutting the rope on the second leg 

BODY 

1) Join 2 legs with 6 ch and 6sc,18sc on 18sc6ch, 6sc=48sc on 6 ch 2)(7sc1inc)*6=54sc 

3-17 54sc 

18) (7sc1dec)*6=48sc 

19-25 48sc 

26)(6sc1dec)*6=42sc 

27-31 42sc 

32(5sc1dec)*6=36sc 

33-36 36sc 

37)(4sc1dec)*6=30sc 

38-39 = 30sc 

40)(3sc1dec)*6=24sc 

41-42 =24sc 

43)(2sc1dec)*6=18sc 

44-47 and done. 

ARM 

1)into magic ring 6sc 

2) 6inc=12sc 

3-39=12sc 

40) knit 6sc and done 

HAIR 

1) 6sc into Magic ring 

2) 6inc=12sc 

3)(1sc1inc)*6=18sc 

4)(2sc1inc)*6=24sc 

5)(3sc1inc)*6=30sc 

6)(4sc1inc)*6=360 

7)(5sc1inc)*6=42sc 

8)(6sc1INC)*6=48sc 

9)(7sc1inc)*6=54sc 

10)(8sc1inc)*6=60sc 

11) (9sc1inc)*6=66sc 

Knit 66sc from 12 to 23 and it’s done. 

Attach by folding 40cm of thread into each sc. 

DRESS 

1) draw 26 ch and knit 25 sc from 2nd and turn 1 ch 

2) 2sc, continue like this until the end of the 1inc row=33sc 1 ch and turn 

3)33sc, 1 ch pull back 

4) Pull 5sc, 8ch and skip 5sc to knit 13sc, pull 8ch and skip 5sc to knit 5sc, 1ch to return 

5) 5sc,8 che 8sc knit, 13sc,8che 8sc knit, 5sc=39sc 

6-8=39sc, 1ch pull back 

9) 4sc, 1inc to the end of the row like this, 1ch and turn = 46sc 

10-13=46sc, 1ch pull back 

14)(8sc,1inc) *4, 10sc=50sc, 1ch pull back 

15-18=50sc, 1ch pull back 

19) (9sc1inc)*5=55sc, 1ch pull back 

20-22=55sc, 1ch pull back 

23)(10sc1inc)*5=60sc, 1ch pull back 

24-25=60sc, 1ch pull back 

26)(11sc1inc)*5=65, 1ch pull back 

27-28-29=65sc, 1ch pull back 

30)(12sc1inc)*5=70sc, 1ch pull back 

31-37=70sc and done. 

SLEEVES OF THE DRESS 

1) Attach the rope to the bottom of the dress and 13sc 

2)(1sc1inc)*6.1sc=20sc 

3-9=20sc over. 

We start with the Little Bunny Rabbit head in the dress 

1)into magic ring 6sc 

2) 6inc=12sc 

3) (1sc1inc)*6=18sc 

4) Pull 1sc, 10ch, sink to the same place, pull 4sc, 10ch, sink to the same place, knit 1sc and done 

For the bunny’s dress, attach the string, aligning the ears 

1) 4sc knit, 1ch pull back 

2) 3sc, 1inc, 1ch pull back 

3)4sc,1inc,1ch pull back 

4) 5sc1inc1ch pull back 

5) 6sc,1inc, 1ch pull back 

6) 7sc,1INC, 1ch pull back 

7) Pull 8sc,10.1ch, turn and done. 

Combine 7ch check for bunny feet and 8 ch check finished perpendicular to the dress. 

SHOES 

1) pull 12 ch and turn 10sc from the 2nd, knit 3sc into the 11th ch, knit 10sc to the other side of the chler 

2)2INC,8sc,3inc,9sc, 1inc 

3)1inc,1sc,1inc, 10sc, 1inc,1sc,1inc,1sc, 1inc, 10sc,1inc 

4)4sc,1inc,11sc,1inc,4sc,1inc, 12sc,1INC 

5)blo 39sc 

6-9=39sc 

10) 11sc, 35 ch, sink to next frequent needle, 4sc, 6.12sc=33sc 

Pull 15sc,6dec,4sc,35ch for left shoe sink to next needle, 8sc=33sc done 

HAIR BAND 

For bandana, pull 6 ch, knit 5sc from 2nd ch, pull 1 ch and turn, blot 5sc. In this way, knit 5sc as a continuous blo according to the baby’s head size and combine. It’s over. 

EARS 

1) 6sc into magic ring 

2)(1sc1inc)*3=9sc 

3)(2sc1inc)*3=12sc 

4)(3sc1inc)*3=15sc 

5)(4sc1inc)*3=18sc 

6)(5sc1inc)*3=21sc 

7-18=21sc fold in half and end perpendicular to the bandage. 

Necessary materials. 

Yarn: 

* Pekhorka “Children’s novelty” No. 02 (black) 

* Alpina Anabel # 172 or 174 (beige, main body color) 

* YarnArt Jeans No. 01 (White) 

* YarnArt Jeans No. 70 (brown) 

* YarnArt Jeans No. 52 (green) 

* YarnArt Jeans No. 36 (pink) 

You can also use other colors and yarn analogs. 

For work you will need: 

Hook 2mm, eyes on a safe fastening (7 / 8mm), beads or small buttons, scissors, needle, filler, brown and black floss to decorate the face. 

The whole toy is knitted in a spiral. 

The height of the doll when using the specified materials is 28 cm 

Abbrevations: 

ch- chain 

sc – single crochet 

hdc- half double crochet 

w-raglan (3 sc in one loop) 

inc- increase 

dec- decrease 

sl-st – slip stitch 

hsc – half loop 

(…) х n – repeat the sequence in brackets n times 

Handles (2 parts) 

We start with beige: 

1row. 6sc into magic ring 

2-13row. 6sc 

Change to White: 

14-17row. 6 sc 

Fasten the thread, detach. 

Tie the other hand in the same way. Do not fill. 

Legs (2 parts) 

We start with shoes (black) 

1row. 6 sc into magic ring 

2row. 6 inc. (12) 

3-6row. 12 sc 

Change to bodily: 

7row. 12 sc for back hsc 

8-23row. 12 sc 

Change to White: 

24-27row. 12 sc 

At the first leg, knit an additional 6sc to the middle of the leg.Fill the leg as you knit. Cut the thread. 

Tie the other leg in the same way. You do not need to knit additional loops, we do not cut the thread. 

Joining the legs (continue with white thread) 

From the second leg we knit 3 ch and insert the hook into the first leg 

28row. 12sc along the first leg, then 3sc along the air chain. Then 12sc in the second leg, and 3 sc in the air. chain (30) 

29row. 30 sc 

30row. 6 sc, inc, 14sc, inc, 8 sc (32) 

31row. 32 sc 

32row. 6 sc, dec, 14 sc, dec, 8 sc (30) 

33row. 5 sc, dec, 13 sc, dec, 8 sc (28) 

34row. 5 sc, dec, 12 sc, dec, 7 sc (26) 

35-41row. 26 sc 

42row. 7 sc, dec, 11 sc, dec, 4 sc (24) 

We fill the body as we knit. 

Joining hands. (we continue with a white thread) 

43row. 7 sc, 6 sc arm, 12 sc, 6 sc arm, 5 sc (36) 

44row. 9 sc, dec, 16sc, dec, 7sc (34) 

45row. 8sc, 2 dec, 13 sc, 2 dec, 5 sc (30) 

46row. (3 sc, dec) x 6 (24) 

47row. (2sc, dec) x 6 (18) 

48row. (7 sc, dec) x 2 (16) + additional 8 sc to mid-back 

Change to beige. 

Neck, head: 

1row. 16 sc 

2row. (7 sc, inc) x 2 (18) 

3row. (2 sc inc) x 6 (24) 

4row. (3 sc inc) x 6 (30) 

5row. (4 sc inc) x 6 (36) 

6row. (5 sc inc) x 6 (42) 

7row. (6 sc inc) x 6 (48) 

8row. (7 sc inc) x 6 (54) 

9row. (8 sc inc) x 6 (60) 

10-18row. 60 sc 

Insert eyes between 14 and 15 rows. At a distance of 6-7 sc 

19row. (8 sc. Dec) x6 (54) 

20row. (7sc dec) x6 (48) 

21row. (6sc dec) x6 (42) 

22row. (5 sc dec) x6 (36) 

23row. (4sc dec) x6 (30) 

We fill in the course of knitting. 

24row. (3 sc, dec) x 6 (24) 

25row. (2 sc, dec) x 6 (18) 

26row. (sc, dec) x 6 (12) 

27row. 6 dec. 

Close the hole, fasten, cut off, hide the tip. 

Coat. 

In green. 

We knit in rotary rows. In each row 1ch. lifting 

1row. We collect a chain of 32 ch. 

2row. In the second from the hook, knit a row of 30 sc. Turn 

3row. 4sc, w, 4sc, w, 10 sc, w, 4 sc, w, 4 sc Rotate 

4row. No change 38 sc Rotate 

5row. 5 sc, w, 6 sc, w, 12 sc, w, 6 sc, w, 5 sc Turn 

6row. No change 46 sc 

7row. 6 sc, w, 8 sc, w, 14 sc, w, 8 sc, w, 6 sc Turn 

8row. No change 54 sc Rotate 

9row. 7 sc, w, 10 sc, w, 16 sc, w, 10 sc, w, 7 sc Rotate 

10row. No change 62 sc Rotate 

We knit a sleeve. We continue with the same thread. 

1row. 22 sc 1ch lift, turn 

2row. 14 sc 1ch rise, turn 

3-6row. 14 sc 1ch rise, turn 

We leave the long end for the seam. Cut the thread 

We attach a new thread to the back. 

Knit 18 sc down the back. Next 14 sc sleeve. 

We also knit the second sleeve from 14 sc 5 rotary rows. 

We leave the long end for the seam. Cut the thread. 

Use a new thread to tie the second front plank of the coat 7 sc 1ch rise, turn. 

Next 7 sc along the plank, insert the hook into the back (leave the sleeve). Back 18 sc 

Insert the hook into the second plank (leave the sleeve), knit 8 sc + 1ch rise, turn. 

We continue to knit the length of the coat in rotary rows, expanding to the bottom, making additions on the sides. 

Sew the sleeves with a needle. 

At the end we tie the whole coat out of sc. On one of the front planks we make button / bead loops. We decorate as you wish. 

We make a neck strap with a white thread. With the second row, you can knit a collar behind the front hsc. 

Hairstyle. In brown. 

Cut the strings 26 cm long. 

We insert the hook into the head and thread the strings through the post. We form a hairstyle at our discretion. 

hat 

Pink thread 

1row. 6 sc 

2row. 6 inc (12) 

3row. (1 sc inc) x 6 (18) 

4row. (2 sc inc) x 6 (24) 

5row. (3 sc inc) x 6 (30) 

6row. (4 sc inc) x 6 (36) 

7row. (5 sc inc) x 6 (42) 

8-10row. 42 sc 

11row. (5sc, dec) x 6 (36) 

12row. (4 sc, dec) x 6 (30) 

13row. 30 hdc. 

Leave the long end for sewing. In the center of the beret, you can make a loop of 5 ch. We decorate the face: we embroider eyebrows, eyelashes, mouth. 

We embroider the nose with bodily yarn. You can also make a blush (pastel or blush). Sew on the Beret. 

Our doll is ready! 

Abbrevations: 

sc single crochet 

inc increase  

Dec decrease

Sl-st slip stitch

ch, chain 

dc double crochet

hdc half double crochet

dcinc double crochet increase 

hdcinc half double crochet increase 

( … ) *6 do the numbers in parentheses 6 times 

A list of materials 

Threads used: 

Hair yarn art Jeans 07 

Ten peria baby soft cotton no 17 

Dress Dark Green peria 42 

Dress Light green peria 20 

Dress Off-white peria 1 O 

Dress cherry etrophil bambino 70308 

6 different shades of pink for flowers 

Threads I use for eyes: 

Crochet 1.5 no. 

Black small amount of peria or gazzal 

White small amount of peria and gazzal 

green gazal 3456 

green fairy 28 

Note: first we knit the body and the dress of the doll … After dressing the dress, we sew the head to the body.. 

Arm 

1 )4 chains starting from the second loop 2sc, 3sc)sc into the same loop, inc=8sc 

2)inc,sc,3inc,sc,2inc =14sc 

3)4)5)=14sc 

6)2inc, 12sc=16sc 

7)16sc 

8)2dec, 12sc=14sc 

9)dec, 12sc=13sc 

10)( dec,2sc)*3,sc= 10 sc 

11) ……… 33)10sc 

Note ; only the tip of the arm has fiber 

We make a set of wires when knitting the body … 

FOOT 

with skin color 

1) 6ch, 4sc,(4sc in same place), 3sc,inc(13sc) 

2)inc, 3sc,4inc,3sc,2inc(20sc) 

3)sc, inc,3sc,(sc, inc)*4.4sc, inc,sc, inc(27sc) 

4)2sc, inc,3sc,(2sc, inc)*4.5sc,inc,2sc, inc(34sc) 

5)3sc, inc,3sc, (3sc, inc )*4.6sc, inc,3sc, inc( 41 sc) 

We cut plastic according to the base .. 

6) blo 41sc 

7) 8)9)10)41sc 

11)12sc,dec,sc,dec,4sc,dec,sc,dec, 15sc(37sc) 

12)8sc,(dec,sc)*3,(sc,dec)*3, 11sc(31sc) 

13)7sc,7dec, 10sc(24sc) 

14)( 4sc,dec)*4(20sc) 

15 ……… 36)20 

37)make 5inc front center for knee(25sc) 

38)do 3dec at center back (22sc) 

39) do 2dec in front center (20sc) 

40 ….. 54)20sc 

First leg done… 

We knit the same on the second leg. 

BODY 

1) join the two legs with 4 ch in the inner middle 

(the loop marker must be in the back center) 

Pull 4ch, 20sc (1st leg), 4sc on ch, 20sc 

(2nd leg), on 4sc ch (48sc) 

2)(7sc, inc)*6(54sc) 

3) …….. 16)54sc 

17)(7sc,dec)*6(48sc) 

18)(6sc,dec)*6(42sc) 

19) ……… 32)(42sc) 

33) at this time, we attach the sleeves with 2sc on the sides, 19sc in the front, 19sc in the back (42sc) 

34)knit the remaining loops on the sleeves(54) 

We attach the wire 

35)(7sc,dec)*6(48sc) 

36)(6sc,dec)*6(42sc) 

37)(5sc,dec)*6(36sc) 

38)(4sc,dec)*6(30sc) 

39)(3sc,dec)*6(24sc) 

40)(2sc,dec)*6(18sc) 

41 …. 44)18sc 

SHOE 

Let’s use 1 crochet half a size larger than the crochet number used in the torso. 

with base color 

1) 6ch, 4sc,(4sc in same place), 3sc,inc(13sc) 

2)inc, 3sc,4inc,3sc,2inc(20sc) 

3)sc, inc,3sc,(sc, inc)*4.4sc, inc,sc, inc(27sc) 

4)2sc, inc,3sc,(2sc, inc)*4.5sc, inc,2sc, inc(34sc) 

5)3sc, inc,3sc, (3sc, inc)*4.6sc, inc,3sc, inc( 41 sc) 

6)41sc 

7) bbp 41 sc (for bbp, you can check youtube Sevgidoluorguler channel) 

(note 6.7. Let’s do a round of sl-st with a different color) 

8)9)10)11 )Put on your shoe color 41 sc mark should be in the back center, otherwise take it 

12)14sc,3dec, 1sc,3dec, 14sc(35) (1sc should be front center) 

13) 13sc, turn 1ch (turn knitting to other side) 

14) Skip 1 stitch, 21sc,dec, turn 1ch 

15) Skip 1 stitch, 8sc,dec, 9sc,dec, turn 1 ch 

16) 19sc, turn 1ch 

17) Skip 1 stitch, 16sc, dec, turn 1 ch 

18) 17sc,1ch turn 

19) Skip 1st, 14sc,dec, turn 1ch 

20) 15sc, turn 1ch 

21) 15sc 

22) continue without turning, make a row of single crochets all around the shoe (including the front) 

Dress 

With dress color (cherry) 

1) pull 25 ch backwards, start from 2nd stitch 24sc, turn 

2)24sc, 1 chain turn (24sc) 

3) 24inc, 1 chain turn (48inc) 

4)48sc, 1 chain turn (48sc) 

5) 7sc, 7ch skip 10sc, 14sc ,1ch skip 10sc, 1sc, 1ch turn 

6) 1sc (42sc) in each loop (on the chain) 

7)8)42sc 

9)3sc,(inc,6sc)*5,inc,3sc (48sc) 

10) ……. 16)48SC, SL-ST 

Combine the two ends with sl-st, we continue to knit the skirt of our dress without cutting the rope. 

We draw 2 chains at the beginning of the row 

1 )(3dc in each stitch,. …. “”repeat the whole row(144dc) 

2) ……. 7)each stitch1dc 144dc) 

8)flo 1dc(144dc) in each stitch 

9)blo(3chain,2sl-st, .. )”repeat entire row (cut rope) 

10) attach green yarn to the blo of the row 1dc into each stitch 

11 ) …… 14) 1 dc in each loop (cut the green thread) 

15) 1 dc in each loop with ecru 

16)17)18) 1 dc in each loop 

19) blo (3chain, skip 2sc, 2sl-st, 3chain skip 2sc, 2sl-st, ….. ) 

20) into 3 chains in bottom row ;(dc, 3ch pull sc into bottom)*3,sc over bottom row sl-st) * entire row 

21) 19. Repeat the 19th and 20th rows with ecru yarn on the flo of the row. Done.. You can sew the opening on the back.. 

sleeve of the dress 

1) We attach the dress color to the sleeve opening of the dress, subtract 20sc 

2)3)4)5) Knit 4 rows of 20sc 

5)(5sc,inc) *3.2sc =23sc 

6) 7) 2 rows of 23sc 

Dress color Bring the rope forward and wait 

8) Attach ecru color to blo 23sc 

9) 3 chains, 3sl-st, 3 chains,3sl-st, …. Cut the rope 

With the rope we brought forward, the whole row is connected to the flo (sc, inc) of the 8th row. 

10) Sl-st the whole row and finish..  

Flower 

with green 

1 )into magic ring 6sc, cut sl-st thread 

Attach pink rope 

2)(2ch, 2hdc to the same place,2ch, sl-st to the other stitch,)*6 

Let’s measure the skirt width first for the combination of flowers.. 

Let’s knit flowers as long as the width of the skirt.. 

(note; I used 19 flowers for each layer..) 

Combining flowers 

1 row 

We connect the flowers to each other with green rope. Let’s remove 1 loop from the back of the flower petal, pull 1 sc, 2ch, remove the loop from the other flower petal, pull 1sc, 4ch, remove 1sc from the lower leaf, remove 1sc from the 2nd flower, make 1 sc together. 

Let’s pull 4ch 1 sc from the top leaf, 2ch, 1 sc from the other leaf…. 

Blossoms this way. Let’s combine.. 

Let’s make a circle 

2nd Row 

Let’s make 2sc into 2ch in the bottom row 1 sc into 4ch, 1 hdc, 1 dc, 1 dc in between 

Let’s make 1 dc 1 hdc 1 sc into the other 4ch 

Let’s complete the same process by repeating .. 

Head 

1) magic ring 6sc 

2) 6inc=12sc 

3)(sc, inc)*6=1 8sc 

4)(2sc,inc)*6=24sc 

5)(3sc, inc )*6=30sc 

6)(4sc,inc)*6=36sc 

7)(5sc, inc)*6=42sc 

8)(6sc, inc)*6=48sc 

9)(7sc,inc)*6=54sc 

10)(8sc, inc)*6=60sc 

11 )(9sc, inc)*6=66sc 

12)(10sc,inc)*6=72sc 

13) ……….. 29)72sc 

30)(10sc,dec)*6=66sc 

31 )(9sc,dec)*6=60sc 

32)(8sc,dec)*6=54sc 

33)(7sc,dec)*6=48sc 

34)(6sc,dec)*6=42sc 

35)(5sc,dec)*6=36sc 

36)(4sc,dec)*6=30sc 

37)(3sc,dec)*6=24sc 

38)(4sc,dec)*4=20sc 

Nose 25-26. Next, we process it as 3sc.. 

The distance between the two eyes should be 2.5 cm. 

HAIR 

1 ) 6sc into magic ring 

2)blo(inc)*6=12sc, sl-st 

3)blo 2 chain,(dcinc)*12, sl-st=(24dc) 

4)blo 2 chains (1dc,1dcinc)* whole row, sl-st 

S)blo 2 chains (2dc, 1dcinc)* whole row, sl-st 

The wig part is finished.. 

We continue without cutting the rope, we pull 50 chains, we make 49sl-st on it, we fix it on the wig with 1 sl-st.. in this way we make a hair strand in each loop 

We make hair strands by skipping 2sc in Flo loops on the wig … 

crochet EYE 

Crochet no. 1.5 

1 )magic ring 8sc with black 

2) 4inc with black,5hdcinc with green 

3 ) sl-st on black with black 

White on green with sl-st done… 

CLASP 

Bandana part; 

1 )magic ring 2chain, 2dc, pull 3 chains 1sc into the magic ring 

close the magic ring, turn the braid 

2)Turn 3ch, 2dc into 3 ch, pull 3 chains 1 sc into the bottom, turn knitting 

3)Repeat Row 2 until you reach the desired length. 

Decorate our bandana with dress flowers.. 

Abbrevations: 

ch – chain

sc – single crochet 

inc – increase (2 sc in one loop) 

dec – decrease (2 sc together) 

dc – column with one crochet 

sl-st – slip stitch

RIGHT HAND AND ARM 

We knit hands and fingers with 1.75 crochet. 

Thumb 

1. 5sc into the magic ring 

2-3. We knit 1sc = 5 in each loop and break the yarn. 

We continue with the index finger, we will knit the other fingers without breaking the thread. 

1. 5sc into the magic ring 

2-4. 1sc = 5 in each loop 

We draw 6 chains into the 2nd loop 5sc(middle finger) 

2-4. We draw 1sc = 5 6 chains in each loop 5sc into the 2nd loop (ring finger) 

2-4. We draw 1sc = 5 5 chains in each loop 5sc (pink finger) into the 2nd loop 

2-3. 1sc = 5 in each loop 

We move on to connecting the fingers. 

1.2sc from ring finger 

2sc from middle finger 

5sc from index finger 

2sc from middle finger 

3sc from ring finger 

After knitting 5sc from the little finger, we knit another 2sc and attach the sign here. (the index rope will be in the middle of the hand) 

2-3. 1sc = 20 in each loop 

We knit 4.3sc, 2sc together with the thumb, 15sc = 20 

5. 2sc,1dec(1sc from finger, 1sc from hand), 2sc from thumb, 4sc, 1dec, 3sc,1dec, 4sc = 18 

6. 4sc, 1dec, 7sc, 1dec, 3sc = 16 

7.1sc, 1dec, (2sc, 1dec) * 3, 1sc = 12 

8-10. 1sc = 12 in each loop 

11.9sc, 1inc, 2sc = 13 

12-13. 1sc = 13 in each loop 

14.9sc, 1inc, 3sc = 14 

15. 1sc into each loop = 14 

16. We make 1sc in each loop, knit another 1sc and put the mark. 

17.9sc, 1inc, 4sc = 15 

18-20. 1sc in each loop =15 

21. We do 1sc in each loop, we do 1sc more and put the mark. If the sign is not exactly centered, we can do 1sc more. At this stage, we attach the wire. 35 cm. We cut the length of wire, bend the end, wrap it with tape and place it. We don’t put a lot of fiber on hand. 22.1sc, 1dec, 6sc, 2inc, 2sc, la = 15 

23.1sc = 15 in each loop 

24. 1sc, 1inc, 6sc, 2dec, 2sc, 1inc = 15 

25. 1sc = 15 in each loop 

26. 10sc, 1inc, 4sc = 16 

27. 1sc into each loop = 16 

28. 11sc, 1inc, 4sc = 17 

29. 1sc into each loop = 17 

30.11sc, 1inc, 5sc = 18 

31-36. 1sc to each loop = 18 

We knit 37.16 sc and finish. 

LEFT HAND AND ARM 

We start with 1.75 mm crochet, first we knit the thumb 

1. 5sc into the magic ring 

2-3. We break 1sc = 5 threads in each loop 

We start knitting the pinky 

1. 5sc into the magic ring 

2-3. We draw 1sc = 5 6 chains in each loop, 

1.2.5sc into the chain 

2-4. 1sc = 5 in each loop (ring finger) 

we pull 6 chains 

1. 2. 5sc into the chain 

2-4. 1sc = 5 in each loop (middle finger) 

we pull 6 chains 

1.2. 5sc into the chain 

2-4. 1sc to each loop = 5 (index finger) 

We connect the fingers and begin to knit the hand 

1.2sc from middle finger 

2sc from ring finger 

5sc from the little finger 

3sc from ring finger 

3sc from middle finger 

After knitting 5sc from the index finger, we knit another 2sc and attach the sign here. (the sign will be in the middle of the hand) 

2-3. 1sc = 20 in each loop 

4.We do 15sc, we knit 2sc together with the thumb, we also knit the remaining 3sc = 20 

5.4sc, 1dec, 3sc, 1dec, 4sc, 2sc from thumb, 1dec (1sc from finger, 1sc from hand), 2sc = 18 

6. 3sc, 1dec, 7sc, 1dec, 4sc = 16 

7.1sc, 1dec, (2sc,1dec)*3, 1sc = 12 

8-9. 1sc = 12 in each loop 

10. We make 1sc, 1sc more in each loop and attach the sign here. (mark will be right in the middle) 

11. 2sc, 1inc, 9sc = 13 

12-13. 1sc = 13 in each loop 

14.3sc, 1inc, 9sc = 14 

15-16. 1sc in each loop =14 

17. 4sc, 1inc, 9sc = 15 

18-20. 1sc = 15 in each loop 

21. We make 1sc in each loop and knit another 1sc and attach the sign here. (the mark will be right in the middle) At this stage, we attach the wire. 

22. 1dec, 2sc, 2inc, 6sc, 1dec, 1sc = 15 

23. 1sc = 15 in each loop 

24.1inc, 2sc, 2dec, 6sc, 1inc, 1sc = 15 

25. We make 1sc, 1sc more in each loop and attach the mark here 

26.4sc, 1inc, 10sc = 16 

27. 1sc into each loop = 16 

28. 4sc, 1inc, 11sc = 17 

29. 1sc into each loop = 17 

30.5sc, 1inc, 11sc = 18 

31-36. 1sc = 18 in each loop 

37. We knit 16sc and finish. 

LEFT FOOT 

We start with white We draw 4 chains From chain 2 

1. 1inc, 1sc, 4sc into the same hole, 1sc, 1inc = 10 

2. 1sc, 1inc, 1sc, 4inc, 1sc,1inc, 1sc = 16 

3. 7sc, 2inc, 7sc = 18 

4-7. 1sc = 18 in each loop 

8. We make 1sc, 1sc more in each loop and attach the mark here. 

9. (19.7sc)*2 = 16 

10. 1sc = 16 in each loop 

11. We make 1sc, 1sc more in each loop and put the mark here. 

12. 9sc, we chain 6, we skip 6 sc, 1sc = 16 

13. 9sc, 6sc on chain, 1sc = 16 

14.1sc, (1dec, 2sc)*3, 1dec, 1sc = 12 

15. (1dec)*6. We close the remaining loops with a needle. 

We proceed to knitting the leg. We continue to knit with white. 

We tie the loop to the inside of the foot. 

1. 1sc into the gap in between, 6sc from the back, 

isc into the space in between, 6sc from the front = 14 

2-4. 1sc = 14 in each loop 

5.We make 1sc, 1sc more in each loop and mark 

6. 2sc, 1inc, 1sc, 1inc, 9sc = 16 

7-8. 1sc in each loop = 16 

WE ARE GOING TO SKIN COLOR 

9. With BLO, 1sc = 16 in each loop (Here, we crochet the remaining FLO without breaking the white). 

10.3sc, 1inc, 2sc, 1inc, 9sc = 18 

11-12. 1sc = 18 in each loop 

13. We make 1sc, 1sc more in each loop and attach the sign here. 

14.3sc, 1inc, 3sc, 1inc, 10sc = 20 

15. 1sc = 20 in each loop 

16. We make 1sc, 1sc more in each loop and attach the sign here. 

17. 4sc, 1inc, 4sc, 1inc, 10sc = 22 

18-20. 1sc in each loop = 22 

21. We make 1sc, 1sc more in each loop and attach the sign here. 

22. 2sc, 1dec, 7sc, 1dec, 9sc = 20 

23.1sc = 20 in each loop 

24.5sc, 1dec, 7sc, 3inc (kneecap), 3sc = 22 

25. 5sc, 1dec, 15sc = 21 

26.12sc, 3dec, 3sc = 18 

27.5sc, 1inc, 12sc = 19 

28. 3sc, 1inc, 5sc, 1inc, 9sc = 21 

29. 1sc into each loop = 21 

30.7sc, 1inc, 13sc = 22 

31-32. 1sc to each loop = 22 

33. 4sc, 1inc, 6sc, 1inc, 10sc = 24 

34. 1sc into each loop = 24 

35. We make 1sc, 1sc more in each loop and attach the sign here. 

36.8sc, 1inc, 15sc = 25 

37-38. 1sc in each loop = 25 

39.5sc, 1inc, 7sc, 1inc, 11sc = 27 

40-44. 1sc in each loop = 27 

45. We make 1sc in each loop and 3sc more so that the mark is in the middle. GOING TO THE WHITE YARN 

46. We knit 1sc (27) in each loop and break the yarn. 

RIGHT LEG 

We start with white 

We pull 4 chains from the 2nd chain 

1. 1inc, 1sc, 4sc into the same hole, 1sc, 1inc = 10 

2. 1sc, 1inc, 1sc, 4inc, 1sc,1inc, 1sc = 16 

3. 7sc, 2inc, 7sc = 18 

4-7. 1sc = 18 in each loop 

8. We make 1sc, 1sc more in each loop and attach the mark here. 

9. (19.7sc)*2 = 16 

10. 1sc into each loop = 16 

11. We make 1sc, 1sc more in each loop and put the mark here. 

12. 1sc, we chain 6, we skip 6 sc, 9sc = 16 

13. 1sc, 6sc on chain, 9sc = 16 

14.1sc, 1dec, 2sc)*3, 1dec, 1sc = 12 

15. We close (1dec)*6. We close the remaining loops with a needle. 

GOING TO THE LEG 

We attach the rope to the inside 

1. 1sc into the gap in between, 6sc in the front 1sc into the gap in between, 6sc in the back = 14 

2-5. 1sc = 14 in each loop 

6. 10sc, 1inc, 1sc, 1inc, 1sc = 16 

7-8. 1sc in each loop = 16 

WE ARE GOING TO SKIN COLOR 

9. 1sc to each loop with BLO = 16 

(Here, we do reverse crochet to the remaining FLO without breaking the white) 

At this stage, we attach the wire. We cut 50 cm length of wire. We bend and tape it according to the foot. We place it on the feet and fill the fiber. Especially, we fill the wrist section tightly by holding it with our hands. We fill a fiber every 5-6 rows. 

10. 11sc, 1inc, 2sc, 1inc, 1sc = 18 

11-12. 1sc = 18 in each loop 

13. We do 1sc in each loop and knit 1sc more and attach the mark here. 

14. 11sc, 1inc, 3sc, 1inc, 2sc = 20 

15-16. 1sc = 20 in each loop 

17. 12sc, 1inc, 4sc, 1inc, 2sc = 22 

18-20. 1sc = 20 in each loop 

21. We make 1sc in each loop and knit another 1sc and attach the sign here 

22.11sc, 1dec, 7sc, 1dec = 20 

23.1sc = 20 in each loop 

24.4sc, 3inc(kneecap). 8sc, 1dec, 3sc = 22 

25. 17sc, 1dec, 3sc = 21 

26.4sc, 3dec, 11sc = 18 

27. 14sc, 1inc, 3sc = 19 

28. 12sc, 1inc, 5sc, 1inc = 21 

29. 1sc into each loop = 21 

30. 16sc, 1inc, 4sc = 22 

31. 1sc into each loop 

32. We make 1sc in each loop and knit another 1sc and attach the sign here 

33. 13SC, 1inc, 6sc, 1inc, 1sc = 24 

34-35. 1sc in each loop = 24 

36. 18, 1inc, 5sc = 25 

37-38. 1sc in each loop = 25 

39. 15sc, 1inc, 7sc, 1inc, 1sc = 27 

40-44. 1sc into each stitch 

45. We make 1sc in each loop and knit another 2sc and attach the sign here. the sign will be in the middle We switch to white 

46. We make 1sc in each loop (27) and fill both legs with fiber.

LEG JOIN 

1. We pull 1 chain and continue to knit from the left leg. 

Let’s put the two legs side by side and check that they are equal. (2sc, 1INC) * 3, 18sc, 1sc to chain, 18sc, (1 inc, 2sc) * 3, 1sc to chain, we put marker string here = 62 

2-13. (1sc = 62 in each stitch during 12 rows) 

14. 6sc, 1dec, 15sc, 1dec, 12sc, 1dec, 15sc, 1dec, 6sc = 58 

15-17. 1sc in each loop = 58 

WE ARE GOING TO SKIN COLOR 

Make another 18.3sc, 1dec, (8sc,1dec)*5, 3sc =52, 1sc and insert the sign here 

19-22. 1sc in each loop = 42 

23.3sc, 1 dec, (7sc,1dec)*2, 6sc, 1 dec, (7sc,1dec)*2, 3sc = 46 

24. 1sc into each loop = 46 

25. 10sc, 1dec, 22sc, 1dec, 10sc = 44 

26-34. 1sc = 44 per loop 

35. 10sc, 1inc, 22sc, 1inc, 10sc = 46 

36.1sc = 46 in each loop 

37. We knit 1sc = 46, 1sc more in each loop and attach the mark here 

Don’t forget to fill in fiber after adding the legs. Fill it with your hands. 

WE ADD HANDLES 

First of all, we check that our signal rope is in the middle. (Behind) 

1. 8sc, 6sc to knit with left sleeve, 18sc from front, 6sc with right sleeve, 8sc 

2. 8sc from the back, 12sc from the arm, 18sc from the front, 12sc from the arm, 8sc from the back = 58 

3-5. 1sc in each loop = 58 

6.7sc, 1dec, 1sc, 1dec, 4sc, 1dec, 1sc, 1dec, (4sc,1dec)*3, 1sc, 1dec, 4sc, 1dec, 1sc, 1dec, 7sc = 48 

7. 1sc into each loop = 48 

8. 6sc, 1dec, 1sc, 1dec, 2sc, 1dec, 1sc, 1dec, 2sc, 1dec, 4sc, 1dec, 2sc, 1dec, 1sc, 1dec, 2sc, 1dec, 1sc, 1dec, 6sc = 38 

9. 1sc into each loop = 38 

10.5sc, 1dec, 1sc, 2dec, 1sc, 1dec, 8sc, 1dec, 1sc, 2dec, 1sc, 1dec, 5sc = 30 

11. 1sc into each loop = 30 

12. (3sc,1dec)*6 = 24 

13. 1sc, 1dec, (2sc,1dec)*5, 1sc = 18 

14-17. We leave long thread to sew 1sc = 18 in each loop 

NOTE: After knitting the 2nd row, we combine all the wires from the legs and arms and tape them well. We do not forget to fill the fiber while knitting. 

HEAD 

1. 6sc into the magic ring 

2. (1inc)*6 = 12 

3. (1sc, 1inc) * 6 = 18 

4. 1sc,1inc, (2sc,1inc)*5, 1sc = 24 

5. (3sc,1inc)*6 = 30 

6. 2sc,1inc, (4sc,1inc)*5, 2sc = 36 

7. (5sc,1inc)*6 = 42 

8.3sc,1inc, (6sc,1inc)*5, 3sc = 48 

9. (7sc,1inc)*6 = 54 

10. 4sc, 1inc, (8sc,1inc)*5, 4sc = 60 

11. (9sc,1inc)*6 = 66 

12-28. 1sc into each loop = 66 

29. (9sc,1dec)*6 = 60 

30.4sc, 1dec (8sc, 1dec) * 5, 4sc = 54 

31. (7sc,1dec *6 = 48 

32. 3sc, 1dec (6sc,1dec)*5, 3sc = 42 

33. (5sc,1dec)*6 = 36 

34.2sc, 1dec, (4sc, 1dec) * 5, 2sc = 24 

35. (3sc,1dec)*6 = 24 

36. We break 1sc, 1dec, (2sc,1dec)*5, 1sc = 18 threads and finish. 

DRESS 

(1w)= 3sc into the same hole 

NOTE: Until the 13th row, 1 chain will be drawn at the end of the row and returned. 

43 We are pulling chains. 2. From the chain 

1.7sc, 1w, 5sc, 1w, 14sc, 1w, 5sc, 1w, 7sc = 50 

2. 1sc = 50 in each loop 

3. 8sc, 1w, 7sc, 1w, 16sc, 1w, 7sc, 1W, 8sc = 58 

4. 1sc into each loop = 58 

5.9sc, 1w, 9sc, 1w, 18sc, 1w,9sc, 1w, 9sc = 66 

6. 1sc into each loop = 66 

7. 10sc, 1w, 11sc1w, 20sc, 1w, 11sc, 1w, 10sc = 74 

8. 11sc, chain 7, skip 15sc, 22sc, chain 7, skip 15sc, 11sc = 58 

9.11sc, 7sc to chain, 22sc, 7sc to chain, 11sc = 58 

10-13. 1sc in each loop = 58 

14. 1sc, pull 1 chain and skip 1sc until the end of the row 

15. 2DC on the sc, 3DC on the chains until the end of the row 

16-29. (14 rows) Knit flat 

30. 2DC into a loop, 3DC into a loop until the end of the row. We break the rope. 

SLEEVES OF THE DRESS 

1. We make 1 DC in each loop along a row. There will be 26 DCs in total. 

2. We finish the row as 2 DC in a loop and 3DC in a loop. 

We make 7sc to the magic ring with Diva or similar thickness colored threads and sew it to the dress. 

SHOES 

We start with brown 

We combine each row with sl-st and pull 1 chain and move to the top row. 

We draw 10 chains from the second chain 

1. 1inc, 7sc, 4sc into the same hole, 8sc = 21 

2. 2inc, 7sc, 4inc, 7sc, 1inc = 28 

3. (1sc,1inc)*2.7sc, (1sc,1inc)*4.7sc, 1sc,1inc = 35 

4. 2sc, 1inc, 10sc, (2sc,1inc)*4, 10sc = 40 

We are not breaking the brown rope, we are switching to the yellow rope. 

We attach the rope so that the back is in the middle. 

1. 1sc = 40 in each stitch with BLO 

2-3. We make sl-st along the row to the FLO of the BLO in each loop with 1sc = 40 Brown. 

4.11sc, (1dec, 2sc) * 4, 1dec, 11sc = 35 

5. 11sc, (1dec,1sc)*4, 1dec, 10sc = 30 

6. We pull 1sc, 1dec, 5sc, 16 chains and sink into the same place, 3sc, (1 dec, 1sc)*2, 1dec, 9sc, 1dec (left shoe) we break the rope. 

6. 1sc, 1dec, 9sc, (1dec, 1sc) * 2, 1dec, 4sc, we pull 16 chains and sink in the same place, 4sc, 1dec (right shoe) we break the rope. 

NECESSARY MATERIALS: 

1. Hook 1.90 mm 

2. A skein of yarn YarnArt Jeans beige for the body (number 07) 

3. Some white YarnArt Jeans yarn for panties (number 62) 

4. Yarn Pekhorka “Children’s novelty” for hair (for light – color number 165, for dark – color number 187. Consumption is less than a hank) 

5. Eyes 9-10 mm on a secure mount 

6. Two wires of 19 cm for a frame with a diameter of 2 mm 

7. Thin medical plaster 

8. A sheet of thick cardboard to cut your hair 

9. Blush for cheeks 

10. Hair ties 

11. Filler holofiber 

12. Plastic cover for foot insoles 

13. Scissors 

14. Big needle 

15. A bit of black, white, brown threads for face decoration 

MATERIALS FOR CLOTHING AND SHOES: 

1. Slightly more skein of YarnArt Jeans yarn for overalls (for giraffe color number 35, for unicorn color number 79) 

2. A little YarnArt Jeans yarn for shoes (for a giraffe color number 70, for a unicorn color number 20. The color of the sole can be any) 

3. Stocking needles 2 mm 

4. Three buttons 

5. Cardboard for shoe insoles 

6. Additional colors of YarnArt Jeans yarn for design of overalls 

When using these materials, the height of the doll is 30 cm 

Abbrevations: 

ch – chain

sc – single crochet 

inc – increase (2 sc in one loop) 

dec – decrease (2 sc together) 

dc – column with one crochet 

sl-st – slip stitch

All parts are knitted in a spiral, unless otherwise indicated. 

Handles (2 parts): 

We fill the handles at the very end, when the whole body is connected. This point is described below. 

1.6sc into magic ring 

2.6inc (12) 

3-6. 12sc (4 rows) 

7.5dc with a common top in one loop (hook makes 6 loops), 11sc (12) 

8-9. 12sc (2 rows) 

10. (2sc, dec) * 3 (9) 

11. (2sc, inc) * 3 (12) 

12-28. 12sc (17 rows) 

Cut the thread and hide it inside. Knit the second handle in the same way, at the end additionally knit 9sc to finish knitting on the inside of the hand (fingers look forward). 

Legs (2 parts): 

1.10ch 

2. Starting from the second loop from the hook, knit 8sc, 4sc into the last loop, 7sc along the second side of the chain, inc (21) 

3.inc, 7sc, 4inc, 7sc, 2inc (28) 

4.1sc, inc, 7sc, (1sc, inc) * 4, 7sc, (1sc, inc) * 2 (35) 

Transfer the outline of the resulting part to the plastic cover. 

Cut out the insole (2 parts). 

5.35sc for the back walls of the hinges 

6.35sc 

7.10sc, 7dec, 11sc (28) 

8.9sc, 4dec, 11sc (24) 

Insert the insole into the foot. 

9. (2sc, dec) * 6 (18) 

10-32. 18sc (23 rows) 

Legs need to be filled in the course of knitting approximately to the middle. I do not fill the toe of the foot very tightly, but the heel and the leg itself are quite tight. 

Knit an extra sc to complete the knit on the inside of the leg. On the first leg, I knitted an additional 8sc, on the second I did NOT knit 2sc in the last row (you may get a different number of stitches due to the difference in knitting density). 

Cut the thread on the first leg and hide it, on the second in the last column, change the thread to white, make 3ch, connect the legs and continue knitting. 

Body: 

1.18sc along the first leg, make sl-st into the already knitted column, so that later there are no holes between the legs, 3sc along the chain of ch, sl-st into the already knitted column, 18sc along the second leg, 3sc along the second side of the chain (42 ) 

In the next row, sl-st does not need to be knitted! 

2.3sc, inc, (6sc, inc) * 5, 3sc (48) 

3. (7sc, inc) * 6 (54) 

4-11. 54sc (8 rows) 

12. (7sc, dec) * 6 (48) 

13.3sc, dec, (6sc, dec) * 5, 3sc (42) 

Knit an additional 10sc and change to beige. So the color transition will not be conspicuous. 

Please note that I start filling the legs from the middle and the body when the doll’s panties run out. It is also very important to evenly and tightly fill the transition from the legs to the body so that the doll does not bend in this place and can stand confidently. 

14-24. 42sc (11 rows) 

25. (5sc, dec) * 6 (36) 

26.36sc 

Remove the marker and knit additional stitches to the middle of the back. 

Next, you need to knit the handles and form the shoulders. 

On the sides of the body, it is necessary to select 5 medium loops. 

Leave 13sc between the handles. 

Attach the handle with your finger facing forward. 

Then knit according to the scheme: 

27.7sc on the back, 5sc grabbing the loops of the arm (inside) and body, 13sc on the chest, 5sc grabbing the loops of the second hand (inside) and the body, 6sc on the back. Place a marker in the next loop. This will be the beginning of a new series (36) 

28.7sc on the back, 1sc to where we connected the first handle to the body, i.e. into the already knitted column, then 8sc along the outside of the handle (the eighth column is obtained when the handle is connected to the body in the previous row. I knit into this column, otherwise there will be holes in the shoulders), 13sc along the chest, 1sc to where we connected the second handle with the body, then 8sc on the outside of the arm, 6sc on the back (44) 

Fill your body tightly enough. 

29. (dec, 20sc) * 2 (42) 

30. (5sc, dec) * 6 (36) 

31.2sc, dec, (4sc, dec) * 5, 2sc (30) 

Take two 19 cm wires and tape the ends on one side with tape. Put the resulting frame in the handles. 

Shape the shoulders and twist the wires together. 

Now you need to fill the pens. I use scissors to push the filler all the way to my palms. It is not necessary to overfill the handles. 

32. (3sc, dec) * 6 (24) 

33. (2sc, dec) * 6 (18) 

34. (4sc, dec) * 3 (15) 

Fill the shoulders evenly and shape them nicely. 

35-40. 15sc (6 rows) 

Cut the thread and hide. 

Insulate the ends of the wires with a plaster. 

Head: 

1.6sc into magic ring 

2.6inc (12) 

3. (1sc, inc) * 6 (18) 

4. (2sc, inc) * 6 (24) 

5. (3sc, inc) * 6 (30) 

6.2sc, inc, (4sc, inc) * 5, 2sc (36) 

7. (5sc, inc) * 6 (42) 

8.3sc, inc, (6sc, inc) * 5, 3sc (48) 

9. (7sc, inc) * 6 (54) 

10.4sc, inc, (8sc, inc) * 5, 4sc (60) 

11-27. 60sc (17 rows) 

Insert safety eyes between rows 19 and 20 of the head. 10sc peephole between the legs. There are 8 visible columns. 

28.4sc, dec, (8sc, dec) * 5, 4sc (54) 

29. (7sc, dec) * 6 (48) 

30.3sc, dec, (6sc, dec) * 5, 3sc (42) 

31. (5sc, dec) * 6 (36) 

Start filling your head. 

Fill the top of the head tightly, but leave the bottom of the head flat. Do not stretch your head into an oval. 

32.2sc, dec, (4sc, dec) * 5, 2sc (30) 

33. (3sc, dec) * 6 (24) 

34. (2sc, dec) * 6 (18) 

35. (4sc, dec) * 3 (15) 

Leave the thread for sewing. 

Face shaping and shaping: 

First tightening: 

Take a needle with beige thread. 

Find the approximate midpoint between the eyes and insert the needle into the middle column between the 33rd and 34th rows of the head. 

Withdraw the needle near the middle of the first eye. Insert the needle on the other side of the eye and withdraw it at the bottom of the head, two columns to the left from the starting point. 

Step two columns to the right from the starting point and insert the needle. 

Bring it out near the outer middle of the second eye. Insert the thread on the other side of the eye and bring it out to the starting point. 

Please note that the thread should lie under the eyes. Tighten by pulling on the threads. Tie a couple of knots. Hide the ends inside the head. The first tightening is ready. 

Second tightening: 

Let’s make the eyes a little closer to each other  

Insert the needle between the 33rd and 34th rows of the head, near the original point of the last tightening. Bring it out near the inner side of the first eye from below. 

Insert the needle near the same eye from above and bring it out near the second eye from the inside from the bottom (try to insert the needle as close to the eyes as possible so that the threads will then hide under them). Guide the needle near the same eye at the top and bring it out at the bottom of the head, stepping back one column from the end of the thread. 

Tighten by pulling on the threads. Tie a couple of knots, hide the ends inside the head. The second tightening is ready. 

Gently add a little of the filler just to the cheeks to plump them up. 

Embroider the nose, stepping down one row from the eyelet. I made 6 stitches. 

Take a needle with white thread. Enter it anywhere between the columns and draw the eyes at the bottom, as shown in the photo. Insert the needle on top of the same eye and withdraw it at the bottom of the second eye. 

Insert the thread from the top of the eye and bring it to the starting point. Do not pull the thread tightly so that it does not slip under the eye. Make a couple of knots, hide the ends inside the head. 

Take a needle with black thread and embroider the eyelashes as shown in the photo. 

We embroider the eyebrows. I used Pekhorka yarn “Children’s novelty” color 187 (cappuccino). 

Mouth tightening: 

Count 6 rows down from the eyelet. Place the needles between rows 6 and 7. 

The width of the mouth is approximately equal to the width of the nose. 

Take a beige thread needle. Enter it at the crown and bring it out near the first needle, enter it near the second needle and bring it to the crown, departing from the initial point one column. Tighten by pulling on the threads. Tie a couple of knots, hide the ends inside the head. The dimple on the crown under the hair will not be visible. 

With pink thread, sew two stitches on the lips. I used YarnArt Jeans color 36. 

Ears (2 parts): 

1.6sc into magic ring. Do not close the ring 

2. Make 2ch, twist knit, 3sl-st, 3inc from hdc 

Leave the thread for sewing. Pull off the magic ring. 

Tie the other ear in the same way. 

Count 8sc out from the eyes and sew on the ears. 

I sewed the top of the ears one row above the eyes. 

Hair attachment: 

Take a thick cardboard 8 cm wide. Wrap hair yarn around it and cut on one side. 

Count 9 rows up from the eyes. It is in the ninth row, using knots, to tie the hair along the forehead line. The hook must be inserted from the doll’s face. 

I always tie the hairs, focusing on the edges of the cilia (see photo) 

Then tie your hair in the back of your head. I start tying in the 5th row of the head. Length of occipital line approximately from ear to ear. The hook must be inserted from the top of the head, i.e. top down. 

Further, from the edge of the back of the head, tie the hairs in each column, rising up to the ear. From the top of the ear, start tying the hairs obliquely to the edge of the forehead line. 

The contour is done, now you need to fill the entire head with hair. 

Go back to the back of your head and tie your hair one row, and every two stitches in the row. 

Tie the next row of hair as well, but in a checkerboard pattern in relation to the hairs from the last row. 

In the same way, tie the hairs up to the very top of the head. 

For the remainder, tie your hair straight away from your face so that it fits well in your hairstyle. The hook must be inserted as shown in the photo. 

Hair styling: 

Determine for yourself approximately a parting in the center of the head. And along this line, add hairs to each column. 

We have two hairs in each column. Divide them between the doll’s tails to make the parting look thick and beautiful. 

Lift up your ponytail hair and add hairs to each column for a nice parting. 

Further, from the top row, from each column, I lower one hair down to make the parting look more natural. 

Tie the ponytail with an elastic band. Issue the second in the same way. 

Put the head on the frame and sew it on. 

The doll is ready, it remains to decorate and dress it up  

If desired, sew the beads to the pupa’s ears. 

Make ruddy cheeks, after covering the body of the pupa with a towel. I use a regular, budget blush. 

Boats: 

We knit the sole (4 parts). 

1.10ch 

2. Starting from the second loop from the hook 8sc, 4sc to the last loop, 7sc to the second side of the chain, inc (21) 

3.inc, 7sc, 4inc, 7sc, 2inc (28) 

4.1sc, inc, 7sc, (1sc, inc) * 4, 7sc, (1sc, inc) * 2 (35) 

5.2sc, inc, 7sc, (2sc, inc) * 4, 7sc, (2sc, inc) * 2 (42) 

Transfer the outline of the resulting part to the cardboard. Cut out the insole. 

You can use a plastic cover instead of cardboard, then the shoes can be washed. But I have dolls with such insoles, for some reason they don’t stand 

Pull the thread on one sole, on the second in the last column, change the thread to the color of the boot. 

Fold the two soles with the wrong sides inward and begin to connect them sc, gripping only the back half-loops of both parts. Remember to insert a cardboard insole. 

Then knit according to the scheme: 

1-5. 42sc (5 rows) 

The marker should be exactly in the middle at the back. If you have it shifted, then rearrange it in the middle. 

6.11sc, 10dec, 11sc (32) 

7.11sc, 5dec, 11sc (27) 

Try on the boots on the doll. If they fit well, then you may not need to knit the next row. If the boots are not tight, then knit the next row. 

8.11sc, dec, 1sc, dec, 11sc (25) 

Cut the thread, fasten and hide. 

The boots are ready. 

Overalls: 

Abbrevations: 

V – raglan (yarn, front loop, yarn) 

knit – front loop 

purl – purl loop 

cr – edge loop 

Cast on 36 loops + 2 hem stitches. 

Knit the first row with purl loops. 

On one side of the jumpsuit, I made a small shelf for buttons, so the number of loops after the raglan is different. On the same side, you will need to knit a strip of garter stitch. 

Knit carefully according to the scheme: 

1.cr, 5knit, V, 5knit, V, 10knit, V, 5knit, V, 4knit, 2knit together, yarn, 1 knit, cr (got a hole for a button) 

2.cr, 4 knit, purl to the end of the row 

3.cr, 6knit, V, 7knit, V, 12knit, V, 7knit, V, 8knit, cr 

4.cr, 4 knit, purl to the end of the row 

5.cr, 7knit, V, 9knit, V, 14knit, V, 9knit, V, 9knit, cr 

6.cr, 4 knit, purl to the end of the row 

7.cr, 8knit, V, 11knit, V, 16knit, V, 11knit, V, 10knit, cr 

8.cr, 4 knit, purl to the end of the row 

9.cr, 9knit, V, 13knit, V, 18knit, V, 13knit, V, 11knit, cr 

10.cr, 4 knit, purl to the end of the row 

11.cr, 10knit, V, 15knit, V, 20knit, V, 15knit, V, 12knit, cr 

12.cr, 4 knit, purl to the end of the row 

13.cr, 11knit, V, 17knit, V, 22knit, V, 17knit, V, 13knit, cr 

14.cr, 4 knit, purl to the end of the row 

In the next row, you need to set aside the loops of the sleeves, make increases and a hole for the second button. 

15.cr, 6knit, 6inc, take off 21 sts on a string, 24inc, 21 sts on a string, 6inc, 5knit, 2knit together, yarn, 1knit, cr (you should have 86 stitches + 2 hem) 

16-29. knit with a straight fabric, in the purl row, continue to knit 4 front loops (14 rows) 

In row 29, make a third hole for the button. 

30-43. continue to knit a straight fabric, in the purl row also knit 4 front loops (14 rows) 

In the 44th purl row, you need to close the first two loops. To do this, without removing the edge loop, knit two loops together (I knitted with the front loop, it’s easier), return the resulting loop to the knitting needle and knit together with the next one. In total, you should get 84 loops + 2 edging. You will get a step (see photo) 

Next, knit all purl loops to the end of the row. You don’t need to knit a strip of garter stitch anymore. 

Knit the jumpsuit with a straight cloth to the end of the body and knit another 1cm, which will go between the legs. I have knitted 10 rows. You may end up with a different number of rows due to the difference in knitting density, so try on the jumpsuit on the doll. 

Having tied the fabric to the desired length, we begin to knit the trousers. We have 43 loops on each leg, but in the first front rows you need to close 2 loops so that the jumpsuit fits nicely between the legs. 

First leg: 

Take an extra knitting needle. 

1. Close two loops, knit 39 knit, cr and turn knitting 

2.in all purl 

3.cr, 39knit, cr 

… etc. In total, I knitted 24 rows plus 4 rows only with front rows (garter stitch). You may need a different number of rows. 

Try on the jumpsuit for the doll. 

Close knitting and leave a long thread to sew. 

Second leg: 

Take a new thread, close two loops, knit 39knit, cr and twist the knit. Next, knit in the same way as the first leg. 

Return to the sleeves and transfer the stitches from the thread to the knitting needle. 

Attach a new thread and tie the sleeve. I have knitted 22 rows of front stitch plus 4 rows of garter stitch. Close knitting, leave a long thread for sewing. Tie the second sleeve in the same way. 

Hood: 

Hold the jumpsuit with the wrong side facing you. 

Use a crochet hook to attach a new thread to the edge of the jumpsuit as shown in the photo. Transfer the resulting loop to the knitting needle. 

Next, type a new loop on the knitting needle (as usual, you dial the loops at the very beginning of knitting). 

Use a crochet hook to make a second loop, transfer it to the knitting needle, then cast on one new loop again, and so on. Because in the overalls, a shelf for buttons was originally made, leave the last two loops free. 

In total, you should have 72 stitches on the knitting needle. 

Turn knitting and knit the next row with knit stitches. 

In the purl row along the edges of the fabric, make 5 knit loops (garter stitch strip). Tie a 9 cm high straight fabric. Divide the stitches in two and place a marker in the center. 

Next, we begin to close the loops of the hood. 

Knit the front row, when there are 3 loops left to the marker, make a decrease, i.e. knit two stitches together, then 1knit, transfer the marker to another knitting needle, again 1knit, 2 stitches together, knit to the end of the row, at the end of the hem. 

Knit the purl row without changes. 

Also knit the next 4 rows, i.e. make decreases through the row, only in the front rows. 

Then knit as well, but make decreases already in each row, both in the front and in the purl. The principle of operation remains the same, when there are three loops left to the marker, make a decrease, then a loop, a marker transfer, a loop, a decrease and unchanged to the end of the row. 

Work in rows with decrements until there are only 14 stitches left on the knitting needle. 

Divide the remaining 14 stitches into two knitting needles and close the stitch to stitch with a needle. 

Sew the pants and sleeves of the jumpsuit. On the front, the jumpsuit must be sewn to the shelf. The shelf needs to be sewn with a little overlap. Sew on the buttons. 

Unicorn Horn: 

1.6sc into magic ring 

2.6sc 

3. (1sc, inc) * 3 (9) 

4-5. 9sc (2 rows) 

6. (2sc, inc) * 3 (12) 

7-8. 12sc (2 rows) 

9. (3sc, inc) * 3 (15) 

Work another 9sc at the back half loops, make sl-st at the tenth column, leave the thread to sew on. 

Unicorn mane: 

In order to avoid unnecessary seams on the seamy side of the hood, I tied the mane to the horn. 

For the mane, I used YarnArt Jeans yarn in color numbers 19, 62 and 74. 

Attach pink string to the half loop on the horn and dial 35 ch. 

From the second stitch from the hook, work (2sc, inc) to the end of the chain, then sl-st at the end. Hide the threads inside the horn and tie them together in a knot. 

In total, I made 9 such chains, ranging in length from 35 to 50 ch. 

Hide all the strings in the horn and fill it a little with holofiber. 

Sew the horn to the hood exactly in the middle, just behind the garter stitch. 

Ears (2 parts): 

Ears for giraffe and unicorns are knitted the same way. 

1.6sc into magic ring 

2. (1sc, inc) * 3 (9) 

3.9sc 

4. (2sc, inc) * 3 (12) 

5.12sc 

6. (3sc, inc) * 3 (15) 

7.15sc 

8. (4sc, inc) * 3 (18) 

9.18sc 

Leave the thread for sewing. 

Fold the eyelet in half and sew with a few stitches. 

Sew the ears to the hood at the same distance from the middle, leaving 4-5 rows from the garter stitch strip. 

Giraffe horns (2 parts): 

Start knitting with brown thread. 

1.6sc into magic ring 

2.6inc (12) 

3-4. 12sc (2 rows) 

5.6dec (6) 

Change the thread to yellow. 

6-9. 6sc (4 rows). 

Leave the thread for sewing. 

The horns can be filled a little. 

Sew the horns to the hood, spaced apart, just behind the garter stitch. 

The jumpsuit is ready. 

Dress up your girls. 

Materials: 

1. Yarn Jeans or any other semi-cotton yarn (pictured one little mermaid is tied from jeans (which more), the other is from acrylic (which is smaller)) 

2.For hair – Camtex stretch 

3.Hook No. 1.75 or 2 

4.Poldec aspen for eyes and pearl half dec decalons for tail decoration 

5. Buttons for fastening hands 

1.Head 

We fill the head as we knit. 

1.6c into magic ring 

2.6İNC (12) 

3. (sc, İNC) * 6 (18) 

4. (2sc, İNC) * 6 (24) 

5. (3sc, İNC) * 6 (30) 

6. (4sc, İNC) * 6 (36) 

7. (5sc, İNC) * 6 (42) 

8. (6sc, İNC) * 6 (48) 

9. (7sc, İNC) * 6 (54) 

10. (8sc, İNC) * 6 (60) 

11-22. 60sc 

23.10sc, 6İNC, 7sc, 6İNC, 31sc (72) 

24.-27. 72sc 

28. (10sc, DEC) * 6 (66) 

29. (9sc, DEC) * 6 (60) 

30. (8sc, DEC) * 6 (54) 

31. (7sc, DEC) * 6 (48) 

32. (6sc, DEC) * 6 (42) 

33. (5sc, DEC) * 6 (36) 

34. (4sc, DEC) * 6 (30) 

35. (3sc, DEC) * 6 (24) 

36. (2sc, DEC) * 6 (18) 

37. (sc, DEC) * 6 (12) 

38.6DEC 

Pull the hole, cut the thread, leaving the end for sewing on. 

2. Body and tail: 

Start with body color: 

1.6sc into magic ring 

2.6İNC (12) 

3. (sc, İNC) * 6 (18) 

4. (2sc, İNC) * 6 (24) 

5. (3sc, İNC) * 6 (30) 

6.-8. 30sc (30) 

9. (9sc, İNC) * 3 (33) 

10.33sc 

11. (10sc, İNC) * 3 (36) 

12.-13. 36sc (36) 

14. (11sc, İNC) * 3 (39) 

Start knitting the bodice with the color of the bodice: 

15.14sc, 3İNC, 5sc body color, 3İNC, 14sc (45) 

16.21sc, 3sc body color, 21sc (45) 

17.14sc, 3DEC, 2sc, 1sc body color, 2sc, 3DEC, 14sc (39) 

18. 39sc 

19. behind the back of the hinge: 12sc, İNC, 12sc, İNC, 12sc, inc (42) 

20.-21.42sc (42) 

22.Body color: 12sc, DEC, 12sc, DEC, 12sc, DEC (39) 

23.8sc, DEC, 20sc, DEC, 8sc (37) 

24.-26. 37sc (37) 

27. (5sc, İNC) * 4.6sc, İNC, 5sc, inc (43) 

28. (sc, İNC) * 3.31sc, (İNC, sc) * 3 (49) 

29.49sc fin color (49) 

30. Behind the hinge rear wall: 49sc (49) 

31.34. 49sc (49) 

35.3sc, DEC, 39sc, DEC, 3sc (47) 

36.-42. 47sc (47) 

43.13sc, DEC, 14sc, DEC, 13sc, DEC (44) 

44. 44sc (44) 

45.13sc, DEC, 12sc, DEC, 13sc, DEC (41) 

46.41sc (41) 

47.12sc, DEC, 11sc, DEC, 12sc, DEC (38) 

48.38sc (38) 

49.11sc, DEC, 10sc, DEC, 11sc, DEC (35) 

50.-51.35sc (35) 

52.10sc, DEC, 9sc, DEC, 10sc, DEC (32) 

53.-54.32sc (32) 

55.9sc, DEC, 8sc, DEC, 9sc, DEC (29) 

56.-58. 29sc (29) 

59.8sc, DEC, 7sc, DEC, 8sc, DEC (26) 

60.-62. 26sc (26) 

63.7sc, DEC, 6sc, DEC, 7sc, DEC (23) 

64.-65.23sc (23) 

66.6sc, DEC, 5sc, DEC, 6sc, DEC (20) 

67. 20sc (20) 

68.5sc, DEC, 4sc, DEC, 5sc, DEC (17) 

69.17sc (17) 

70.4sc, DEC, 3sc, DEC, 4sc, DEC (14) 

71.14sc (14) 

72.3sc, DEC, 2sc, DEC, 3sc, DEC (11) 

73.11sc (11) 

74.2sc, DEC, sc, DEC, 2sc, DEC (8) 

75.9sc (8) 

76.4DEC Pull the hole, fasten and hide the thread. 

3.Tail fin: 

We knit 4 parts. 

Dial a chain of 26sc starting from the 2nd loop from hook: 

1.24sc, 3sc in the last loop, on the other side: 24sc. 

2. İNC, 2sc, 3hdc, 4dc, 5dc, 4dc, 3hdc, 3sc, İNC of 3x sc, on the other side: 

3sc, 3hdc, 4dc, 5dc, 4dc, 3hdc, 2sc, sl-st 

Tail harness: 

We take two parts and tie them together. For strapping tail can use a shell pattern, or any Volumetric pattern you like. 

4.Hands: 

Hands can be made thin and plump, anyone like like. We do not fill the handles much. 

If you want thin pens: 

1.6sc into magic ring 

2. (2sc, İNC) * 2 (8) 

3. (3sc, İNC) * 2 (10) 

4.-6. 10sc 

7. (3sc, DEC) * 2 (8) 

8.-26. 8sc 

If you want a handle thicker: 

4. (4sc, İNC) * 2 (12) 

5. (5sc, İNC) * 2 (14) 

6.-7. 14sc 

8. (5sc, DEC) * 2 (12) 

9.-24. 12sc 

25. (5sc, İNC) * 2 (14) 

26.-28. 14sc 

29. (5sc, DEC) * 2 (12) 

30. 6DEC thread fasten and hide 

5. Design: 

Nose: 

1.5sc into magic ring 

2.sc, İNC, 2sc, İNC (7) 

3. 7sc 

Ears: 

1.5sc into magic ring 

2.İNC, 2sc, İNC, sc expand 

3.ch, 7sc 

Bodice harness: 

3ch, sl-st- into magic ring waiting for a loop 

Waist tail trim: 

We begin to tie in the front in the middle 

1sc, (3ch, sc to next loop) * 4, (4ch, sc to next) * 6, (5ch, sc in the next) * 7, (6ch, sc in the next) * 10, (5ch, sc in next) * 7, (4ch, sc next) * 6, (3ch, sc next) * 4, sl-st (returning to the begining) 

Sew on all the details, focusing on the photo, glue eyes and decorate the tail. We fasten the hair with knots, having previously cut the desired length of the Camtex thread, or any other yarn. 

Materials 

1. Yarn Art Begonia yarn (50g / 169m) flesh-colored No. 6322, Alize Diva yarn (100g / 350m) black (No. 60) and yellow (No. 216) 

2. Yarn Alize Forever (50g / 300m) yellow (No. 488) for a wig 

3. Hooks No. 1,5 and No. 1,1 

4. Filler 

5. Eyes with a diameter of 12 mm 

6. Cilia 

7. White felt 

8. Stickers in the form of Swarovski stones for finishing the skirt (optional) 

9. Scissors 

10. Glue 

11. Wire for the neck frame section 2.5 mm 

12. A wire for antennas with a section of 1 mm 

Abbrevations: 

ch – chain 

sc – single crochet 

sl-st – slip-stitch 

DC – double crochet 

HDC – half double crochet 

inc – increase 

dec – decrease 

Knit legs 

Right leg 

The beginning row marker should pass in the back center of the leg. 

In a black thread dial a chain of 6CH + 1CH 

1: 5 sc, 3 sc in the last loop, 4 sc, inc (14) 

2: inc, 4 sc, 3 inc, 4 sc, 2 inc (20) 

3: sc, inc, 4 sc, (sc, inc) * 3, 4 sc, (sc, inc) * 2 (26) 

4: 2 sc, inc, 4 sc, (2 sc, inc) * 3, 4 sc, (2 sc, inc) * 2 (32) 

5-6: 32 sc (32) 

7:31 sc. move the marker of the beginning of the row so that the next row starts exactly in the middle of the heel (31) 

8: 7 sc, (dec, sc) * 2, dec, 2 sc, dec, (sc, dec) * 2, 7 sc (26) 

9: sc, dec, 4 sc, 6dec, 4 sc, dec, sc (18) 

10: 7 sc, 2 dec, 7 sc (16) 

Start knitting the right leg 

Go to the flesh-colored thread. 

11: knit on the back of the hinges: 16 sc (16) 

12: 1 n offset, (3 sc, inc) * 4 (20) 

Go to the skin-colored thread Knitted sock dolls. Side view 

13: 20 sc (20) 

14: 19 sc, inc (21) 

15-16: 21 sc (21) 

17: (6 sc, inc) * 3 (24) 

18-21: 24 sc (24) 

22: (2 sc, dec) * 6 (18) 

23: 7 sc, 4 inc, 7 sc (22) 

24: 7 sc, 8 HDC, 7 sc (22) 

25: 7 sc, 4 dec, 7 sc (18) 

26: (2 sc, inc) * 6 (24) 

27: (5 sc, inc) * 4 (28) 

28-36: (9 rows) 28 sc (28) 

Go to the black thread. 

37: 28 sc (28) 

38: knit on the back of the hinges: 28 sc (28) 

39: 7 sc. Fasten the thread, cut. 

Pupa leg. Front view Side view Pupa foot. Back view 

Boot shaft 

We knit freely. 

We attach the yellow thread to the first half-loop of the 11th row 

1: (3 HDC, inc HDC) * 4 (20) 

2-4: 20 HDC (20) 

Go to the black thread. 

5-6: 20 HDC (20) 

7: tie the edge of the shaft with a “step of the dog” 

Close the thread, cut it. Carefully hide the tip of the thread. 

Now lightly pick up the bootleg to form a crease. 

Knit bootleg

We attach the black thread to the first half-loop of the 37th row. 

1: (3CH, 1 loop skip, sl-st) * in a circle to the end of the row. 

Fasten the thread, cut. 

Attention! Quilling must be tied before connecting the two legs, otherwise then it will be very difficult to do. 

Knit before joining two legs 

Left leg 

We knit similarly to the right leg to the 39th row 

39: 21 sc. Further, without breaking the threads, we connect both legs together: 28 sc on the right foot, 7 sc (56) 

We continue to knit the body. 

Ready legs for a doll 

Knit body 

A marker at the beginning of the row runs through the center of the back. 

40: 5 sc, (inc, sc) * 2, inc, 22 sc, (inc, sc) * 2, inc, 11 sc, 2inc, 6 sc (64) 

41: 51 sc, inc, 4 sc. Move the beginning row marker 

42: 4 sc, inc, 60 sc (66) 

43-49: (7 rows) 66 sc (66) 

50: 2 sc, dec, (4 sc, dec) * 2, 34 sc, dec, (4 sc, dec) * 2, 2 sc (60) 

51: 60 sc (60) 

52: 4sc, dec, (8 sc, dec) * 5, 4 sc (54) 

53: 54 sc (54) 

54: knit on the back of the hinges: 54 sc (54) 

55r (7 sc, dec) * 6 (48) 

56-67: (12 rows) 48 sc (48) 

68: 15 sc, (dec, 2 sc) * 4, dec, 15 sc (43) 

69-70: 43 sc (43) 

71: 15 sc, (dec, 3 sc) * 2, dec, 16 sc (40) 

72: 40 sc (40) 

73: (8 sc, dec) * 4 (36) 

74: (4 sc, dec) * 6 (30) 

75: (3 sc, dec) * 6 (24) 

Go to the flesh-colored thread. 

76: we knit for the rear walls of the loops (2 sc, dec) * 6 (18) 

77-79: 18 sc (18) 

Fasten the thread, cut, leaving the thread for sewing. 

The finished body of the pupa. Front view of the finished body of the chrysalis. Side view 

We knit a skirt 

We attach the yellow thread to the last half-loop of the 14th row of the body. 

1: 2CH, 54DC (54), sl-st 

2: 2CH, (8 DC, inc DC) * 6 (60), sl-st 

3: 2CH, (5 DC, inc DC) * 10 (70), sl-st 

4: 2CH, (4 DC, inc DC) * 14 (84), sl-st 

5: 2CH, (1 DC, inc DC) * 42 (126), sl-st 

6: 2CH, (inc DC, 2 DC) * 42 (168), sl-st 

7: 2CH, (3 DC, inc DC) * 42 (210), sl-st 

8: tie the edge of the skirt with a “walk step” 

Start knitting a skirt 

Stick the stickers to the skirt in a chaotic manner. If you don’t have any stickers, you can tie and sew the spots, or embroider, or you can leave them like that. At your discretion  

Ready-made skirtWe use stickers to decorate the skirt 

We knit a collar 

We attach the yellow thread to the last half-loop of the 75th row of the body. 

1: (3CH, skip 1 loop, 1sl-st in the next step) * repeat to the end of the row. 

2: sl-st in the first arch of the 1st row, (5CH, sl-st in the arch) * repeat until the end of the row. You should get 10 arches. 

3: into magic ring we knit each arch: (sl-st. Sc, HDC, DC, 1CH, DC, HDC, sc, sl-st) * 10 times. 

Fasten the thread, cut. Carefully hide the end of the thread. 

Knitted doll collar 

We knit flowers (2 parts) 

1: 6 sc into magic ring 

2: (sl-st in the next step, 3CH, 3 DC with one vertex, 3CH, sl-st in the same loop) * 6 times 

Glue a rhinestone in the middle of the flower, sew or glue flowers to the boots as shown in the photo. Again, instead of rhinestones, you can use a bead. 

We knit hands (2 parts) 

Thumb and little finger 

1: 5 sc into magic ring (5) 

2-3: 5 sc (5) 

Fasten the thread, cut. 

Index, middle and ring fingers (1st, 2nd, 3rd) 

1: 5 sc into magic ring (5) 

2-4: 5 sc (5) 

Fasten the thread, cut. 

At the end of knitting the 3rd finger, do not break the thread !!! 

Knitted fingers 

Left hand 

1: 2 sc of the 3rd finger, 2 sc of the 2nd finger, 2 sc of the 1st finger, 5 sc of the little finger, 3 sc of the 1st finger, 3 sc of the 2nd finger, 3 sc of the 3rd finger (20) 

Start knitting your left hand 

2-3: 20 sc (20) 

4: 2 sc, capturing at the same time palm loops and thumb loops, 18 sc (20) 

5: 2 sc of the thumb, dec (decrease the last loop of the thumb and the first loop of the palm), 5 sc, dec, 8 sc, dec (18) 

Knit thumb 

6: 18 sc (18) 

7: (1 sc, dec) * 6 (12) 

8: 12 sc (12) 

Fill the palm with filler. 

Fill the palm with a filler. Knitted palm. Back view 

9: (sc, inc) * 6 (18) 

10-17rr (8 rows) 18 sc (18) 

18: (4 sc, dec) * 3 (15) 

19: 15 sc (15) 

20: (2 sc, inc) * 5 (20) 

21-30: (10 rows) 20 sc (20) 

31: (2 sc, dec) * 5 (15) 

32: (sc, dec) * 5 (10) 

33: 5 dec (5) 

Pull the hole, fasten the thread, cut. Hide the end of the thread inside the part. 

Right hand 

1: 3 sc of the 3rd finger, 3 sc of the 2nd finger, 3 sc of the 1st finger, 5 sc of the little finger, 2 sc of the 1st finger, 2 sc of the 2nd finger, 2 sc of the 3rd finger (20) 

2-3: 20 sc (20) 

4: 18 sc, 2 sc, capturing at the same time the loops of the palm and loops of the thumb (20) 

5: dec, 8 sc, dec, 5 sc, dec (decrease the first loop of the thumb and the last loop of the palm), 2 sc (18) 

6: 18 sc (18) 

7: (1 sc, dec) * 6 (12) 

8: 12 sc (12) 

Fill the palm with filler. 

9: (sc, inc) * 6 (18) 

10-17rr (8 rows) 18 sc (18) 

18: (4 sc, dec) * 3 (15) 

19: 15 sc (15) 

20: (2 sc, inc) * 5 (20) 

21-30: (10 rows) 20 sc (20) 

31: (2 sc, dec) * 5 (15) 

32: (sc, dec) * 5 (10) 

33: 5 dec (5) 

Pull the hole, fasten the thread, cut. Hide the end of the thread inside the part. 

Knitted handles for dolls 

Sew hands to the torso. 

Sew hands to the body 

Knit head 

1: 6 sc into magic ring (6) 

2: 6 inc (12) 

3: (sc, inc) * 6 (18) 

4: sc, inc, (2 sc, inc) * 5, sc (24) 

5: (3 sc, inc) * 6 (30) 

6: 2 sc, inc, (4 sc, inc) * 5, 2 sc (36) 

7: (5 sc, inc) * 6 (42) 

8: 3 sc, inc, (6 sc, inc) * 5, 3 sc (48) 

9: (7 sc, inc) * 6 (54) 

10: 4 sc, inc, (8 sc, inc) * 5, 4 sc (60) 

11: (9 sc, inc) * 6 (66) 

12: 5 sc, inc, (10 sc, inc) * 5, 5 sc (72) 

13: (11 sc, inc) * 6 (78) 

14-24: (11 rows) 78 sc (78) 

25: 33 sc, 2CH, skip 2p of the previous row, 8 sc, 2CH, skip 2p of the previous row, 33 sc (78) 

26: 33 sc, 2 sc down the chain, 8 sc, 2 sc down the chain, 33 sc (78) 

27: 25 sc, inc, (sc, inc) * 5, 6 sc, inc, (sc, inc) * 5, 25 sc (90) 

28-37: (10 rows) 90 sc (90) 

38: (13 sc, dec) * 6 (84) 

39: 6 sc, dec, (12 sc, dec) * 5, 6 sc (78) 

40: (11 sc, dec) * 6 (72) 

41: 5 sc, dec, (10 sc, dec) * 5, 5 sc (66) 

42: (9 sc, dec) * 6 (60) 

43: 4 sc, dec, (8 sc, dec) * 5, 4 sc (54) 

44: (7 sc, dec) * 6 (48) 

45: 3 sc, dec, (6 sc, dec) * 5, 3 sc (42) 

46: (5 sc, dec) * 6 (36) 

47: 2 sc, dec, (4 sc, dec) * 5, 2 sc (30) 

48: (3 sc, dec) * 6 (24) 

49: sc, dec, (2 sc, dec) * 5, sc (18) 

Fasten the thread, cut. 

Knitted head. Front view Knitted head. Side view 

Knit nose 

1: 6 sc into magic ring (6) 

2: 6 inc (12) 

3: (sc, dec) * 4 (8) 

Fasten the thread, cut. 

Knit a wig 

Hook number 1.1 

1: 6 sc into magic ring (6) 

2: we knit the back wall of the stitches 6 inc (12) 

3: (sc, inc) * 6 (18) 

4: we knit sc, inc, (2 sc, inc) * 5, sc (24) for the back wall of the loops 

5: (3 sc, inc) * 6 (30) 

6: we knit 2 sc, inc, (4 sc, inc) * 5, 2 sc (36) for the back wall of loops 

7: (5 sc, inc) * 6 (42) 

8: we knit 3 sc, inc, (6 sc, inc) * 5, 3 sc (48) for the back wall of loops 

9: (7 sc, inc) * 6 (54) 

10: we knit 4 sc, inc, (8 sc, inc) * 5, 4 sc (60) for the back wall of the loops 

11: (9 sc, inc) * 6 (66) 

12: we knit 5 sc, inc, (10 sc, inc) * 5, 5 sc (72) for the back wall of loops 

13: (11 sc, inc) * 6 (78) 

14: we knit 6 sc, inc, (12 sc, inc) * 5, 6 sc (84) for the back wall of loops 

15: (13 sc, inc) * 6 (90) 

16: we knit the back wall of the loops 51 sc (51) 

17-18: 1CH, turn, 51 sc (51) 

19: we knit for the front wall of the loops 1CH, turn, 51 sc (51) 

20-21: 1CH, turn, 51 sc (51) 

22: knit behind the back wall of 1CH stitches, turn, 51 sc (51) 

23-24: 1CH, turn, 51 sc (51) 

25: knit 1CH, twist, 51 sc (51) 

26: 1CH, turn, 51 sc (51) 

27: 1CH, turn, dec, 47 sc, dec (49) 

28: we knit behind the back wall of the loops 1 CH, turn, 49 sc (49) 

29-30: 1CH, turn, 49 sc (49) 

31: knit 1CH, twist, 49 sc (49) 

32: 1CH, turn, 49 sc (49) 

33: 1CH, turn, dec, 45 sc, dec (47) 

34: knit behind the back wall of 1CH stitches, turn, 47 sc (47) 

35: 1CH, rotate, dec, 43 sc, dec (45) 

36: 1CH, turn, 45 sc (45) 

37: knit 1CH, twist, dec, 41 sc, dec (43) 

38: 1CH, turn, 43 sc (43) 

39: 1CH, turn, dec, 39 sc, dec (41) 

40: knit behind the back wall of 1CH stitches, turn, 41 sc (41) 

41: 1CH, turn, dec, 37 sc, dec (39) 

42: 1CH, turn, 39 sc (39) 

Knitted wig on the head. Front view Knitted wig on the head. Side view Knitted wig on the head. Back view 

We do not cut the thread but continue to knit “hair”: 

(we knit 60CH, starting from the second loop from the hook: 59sl-st, skip 2 wig loops, sl-st into the 3rd loop) * thus we knit to the bottom of the bottom row. 

Knit hair on a wig 

Next, we knit in zigzag rows for the left half loops in the corresponding rows. 

Knit in zigzag rows 

Having reached the spiral rows, we knit the chains of the first 3 rows in this way: 60CH, 50CH, 40CH, 30CH, (20CH) * on the frontal part until 12p remains. and then again 30CH, 40CH, 50CH, 60CH. 

In the remaining spiral rows everywhere we knit chains of 60CH. Having reached the crown, we knit the last chain, cut the thread and fix it from the wrong side. 

Ready-made wigReady wig for the doll. View from above 

Face design 

1. We designate with pins the points of the eye and mouth tighteners. 

For the eyes: retreating 1 loop on both sides of the eye holes tied in the 25th row of the head. 

For the mouth: by counting 12 rows from the bottom in the center of the head at a position of 9 stitches from each other. 

Pins mark the points of the harnesses 

2. Tighten the eyes: insert the needle with a strong thread into the lower opening of the head, withdraw from the inside of the right eye, again insert the needle into the point of the outside of the eye and withdraw into the lower opening of the head. To do the same 2-3 times constantly pulling the thread. Fasten the thread from the bottom. Tighten your left eye in the same way. 

Tighten the eyes on the head 

3. Mouth tightening: insert the needle at any point of connection of the two loops on the crown, withdraw from the other side of the mouth, insert into the point on the other side of the mouth and bring the needle to the starting point. Make a tightening 2 more times, constantly pulling the thread. Tie the thread firmly and drown the bundle inside the head. Embroider a mouth with a pink thread. 

Perform a mouth contraction on the head 

4. Sew the nose in the center. 

Sew the nose to the head 

5. Prepare the eyes as shown in the photo. 

Cooking eyes for the doll 

6. Glue the eyes to the head. Embroider a thread in black eyebrows. 

We complete the design, embroider the eyebrows with a thread 

7. Pin the wig to the head with pins and sew on. 

We fix the wig on the head of the doll 

9. Cut 3 pieces of wire 15 cm long. Wind them together with adhesive tape. Insert the frame half in the body, half in the head. Sew the head to the torso. 

Sew the head to the body and tint the cheeks of the doll 

10. Toned cheeks. 

Knit a bow 

Consists of 3 parts. 

1st part (black thread): 

Dial a chain of 20CH + 1CH 

1: from the second loop from the hook: 20 sc (20) 

2-14: 1CH, turn, 20 sc (20) 

Tie the part on all sides with a “crustacean step”. Fasten the thread, trim, hide the end of the thread. 

2nd part (yellow thread): 

Dial a chain of 15CH + 1CH 

1: from the second loop from the hook: 15 sc (15) 

2-9: 1CH, turn, 15 sc (15) 

Tie the part on all sides with a “crustacean step”. Fasten the thread, trim, hide the end of the thread. 

3rd detail (black thread): 

Dial a chain of 5CH + 1CH 

1: from the second loop from the hook: 5 sc (5) 

2-12: 1CH, turn, 5 sc (5) 

Fasten the thread, cut off leaving a long end for stitching. 

Form from bows 1 and 2 bows, wrap them with part No. 3. Sew both edges of part 3 on the back. 

Cooking elements for butterfliesOur butterfly is ready 

We knit antennas (2 parts) 

We knit 2 balls as follows: 

1: 6 sc into magic ring (6) 

2: 6 inc (12) 

3: (sc, inc) * 6 (18) 

4-6: 18 sc 

7: (sc, dec) * 6 (12) 

8: 6 dec 

Fasten the thread, cut off, leaving a long end (about 50 cm). Stuff the details. 

Knit two balls 

Cut 2 pieces of wire 6 cm long, from one end wrap the wire with adhesive tape. Insert the wire with the coiled end into the balls. The left long end of the thread is threaded into the needle and gently tighten the hole of the ball around the wire. Next, wrap this thread around the wire. At the end, fasten the thread with glue. 

Prepare two pieces of wire. Wrap the thread around the wire. 

Headband 

Leaving the long end of the thread (enough for 70CH), dial a chain of 50CH + 1CH. 

1: from the 2nd n from the hook: 49 sc, 3 sc to the last loop, 48 sc, pr 

2: sl-st in the first loop of the previous row, 1CH, then tie the part in a circle with a “wisp” 

Do not cut the thread. We knit a chain of 70CH, fasten and cut the thread. 

On the other hand, dressings also tie a chain of 70CH. Fasten and cut the thread. 

We knit a bandage 

Sew a bow in the center of the dressing. 

Attach the antenna to the dressing. 

Doll dressing 

Tie a bandage on the head of the pupa. 

Thank you for your attention to my work! You got a wonderful toy!