Rowdy Bunny Amigurumi Free Crochet Pattern

Pinterest Offical Page :

Facebook Group: Amigurumi Free Patterns

Facebook Offical Page: Free Amigurumi Picpin

I am sharing with you amigurumi animal patterns for free. you will love this wonderful amigurumi rowdy bunny pattern.


1.5mm crochet hook (or whatever size you prefer that works best with your yarn) 

Small pliers 


long sewing needle 


“Detskaya Novinka” yarn as the main color, the “bisernaya” yarn for the team (can be used any thread) Filling 

Copper wire, 1 mm, for joints and skeleton 

One large and 5 medium-sized buttons (4 of them identical, for joints) Buttons or snap buttons for shorts 

Eyes (10-15mm or larger if you are using thicker yarn – the rabbit is going to be bigger) small stones or coins for weight 

Strong, non-elastic sewing thread for joints 


St = stitches 

ch = chain 

sc = single crochet 

HDC = half double crochet 

BLO = Back Loop 

inc = increase: crochet 2 stitches at next stitch 

Dec = crochet decrease the next 2 stitches together create a stitch 

Rnd = round 

sl st = slip stitch 

Arms. 2.

Do the work in a spiral, not join the rounds. 

1. 6 sc in a magic ring (or ch 2, 6 sc in 2 North Dakota hook chain) 

2. inc 6 (12) 

3-6. 12 sc 

7. Dec 2, 3sc, inc 2, 3sc (which is the curve of the hand, when set, the drops should be towards up) 

8. 12SC 

9. 6SC, inc, 5SC. (13) 

10. 13sc 

11. 6SC, inc, 6SC. (14) 

12. 14SC 

13. 7SC, inc, 6SC. (fifteen) 

14-15. 15SC 

16. INC2, 3sc, dec3, 3sc, inc (elbow that forms, when connecting the decreases they should be towards down) 

17. 15SC 

18. 1sc, inc, 13sc (sixteen) 

19-26. 16SC 

Insert the wire, bend the arm at the elbow and wrist. 

Use the wire 1 mm thick. In the image below the small loop is for the wrist, the great loop is for the shoulder. When sewing the arm, the needle should go through the large loop. 

Bend the wire and wrap with the filler (polyester filler works best), wrap with thread As shown in the picture.  

It is better to sew the filling of the loops, so that it is not slide when the cable is inserted into the arm.  

Make sure you use two identical pieces of filled polyester, so the arms are the same size.  

27. (dec, 2 sc) repeat until end of row. 

28. dec, at the end of the row, sew the end zipper, knit in tail. 

Leg. Do 2. 

7 ch. 

Rnd 1. Sc on 2 hook North Dakota cad, 5SC, 3sc on last chain (circle one half left). Follow working around the string – 6SC, 2sc on the last string. (17) 

Rnd 2. 6SC, inc3, 6SC, inc 2. (the end with 3 increases will be the toe) (22) 

Rnd3. 7SC, (inc, sc, inc, sc, inc,), 7SC, (inc, sc, inc). (27) 

Rnd4. 8sc, (inc, 2SC, inc, 2SC, inc), 8sc, (inc, sc, inc), sc (32) 

Rnd5. 9sc, (inc, 3sc, inc, 3sc, inc), 14SC (35) 

We made the only one 

6. rnd – BLO, Only this row. (35) 

The sole is ready. Cut cardboard or plastic insert the size of the sole. 

Rnd 7-10. 35 sc. 

Mark the heel middle and toe with stitch markers or pieces of thread scrap.  

Rnd 8. Continue working the rounds. 8 sts before toe marker. Start decreasing: dec, sc, dec, sc, DEC, (marker stitches), dec, sc, dec, sc, dec, and sc to end of row. (29) 

9. RND 29 sc. 

Fold the sole along the initial chain (1st row), middle toe and heel mark.  

Rnd 10. Second row of decreases: 8 sts before marker toe start: dec, sc, december, sc, december, (marker stitches) dec, sc, dec, sc, dec, and sc to the end of the row. (23) Place the insert on the foot.  

Rnd 11. Third row of the decreases: Dec In the middle of the toe, DEC 2 in the middle of the heel (20)  

Rnd 12-14. SC20 

Place the coins or stones for the weight on the foot (you can tape coins together), stick the foot in. 

In the photo below: Leg finished, the foot of the other leg and insert for the foot. 

Keep doing the leg, adding as the filling progresses: 

Rnd15. Inc, 9 sc, inc, 9 sc (22)  

Rnd16. Inc, 10 sc, inc, 10 sc (24)  

Rnd17. Inc, 11 sc, inc, 11 sc (26) Rnd 18-20. sc 26 

Rnd 21. (dec, 2SC,) x6, 2SC (20) 

Rnd22. Dec, until you have 4-6 sts left, sew end zipper, knit in tail. 


Crochet into a spiral without lifting chains, things as you go, tight, but don’t warp the shape. 

1. 6SC in a magic loop 

2. Inc 6 (12) 

3. (Sc, inc) x6 (18) 

4. (2SC, inc) x6 (24) 

5. (3sc, inc) x6 (30) 

6. (4SC, inc) x6 (36) 

7. (5SC, inc) x6 (42) 

8. 42sc 

9. (6SC, inc) x6 (48) 

10-14. 48SC 

15. (dec, sc) x5, dec, 31sc (42) 

16. 42sc 

17. (dec, sc) x4, 30SC (38) 

18-24. 38sc 

25. 8sc, (dec, 4SC) x4, dec, 4SC (33) 

26-31. 33sc 

32. (dec, 9sc) x3 (30) 

33-36. 30SC 

37. (dec, 3sc) x6 (24) 

Matter, insert the bottom of a button joint. Joint button is made with 2 buttons and wire. 

You will have a button (2-3 cm) with holes, and about 5 cm of wire. Bend the wire into a U and inserted into button holes. Photo 1. 

Insert the button into the body, wire should be outside, then decrease, working around of the wire, close the gap. Photo 2. Leave 6-7 stitches. Cut yarn, knit in the end. 


Crochet into a spiral, do not join rounds, things as you go, tight, but do not deform the shape. 

1. 6 ch in a circle (6 ch, sl st on the 1st string). This is the opening for the joint, which connects the head to the body. 

2. Inc 6 (12) 

3. (Sc, inc) x6 (18) 

4. (2SC, inc) x6 (24) 

5. (3sc, inc) x6 (30) 

6. (4SC, inc) x6 (36) 

7. (5SC, inc) x6 (42) 

8. (6SC, inc) x6 (48) 

9. (7SC, inc) x6 (54) 

10. (8sc, inc) x6 (60) 

11. (9sc, inc) x6 (66) 

In Rnd 12 we are moving increases, so the head is rounder: 

12. 5SC, inc, (10SC, inc) x5, 5SC (72) 

13-17. 72sc 

18. (dec, sc) x6, 3sc, (dec, sc) x6, 33sc (60) 

19-20. 60sc 

When the safety eyes have rather thick stems, we will make two openings for them at Rnd 21. 21 5SC, 4 ch, sc at 9th st of Rnd 20. Marker must be exactly below the mean of its opening. Yes not, move the beginning of the row so that it is. Make the other opening above the second marker. If the opening is too large for your mother’s eye, make it smaller, by using less chains. There should be no 6-8 sts between the eyes once it is put on. 

Head-to-body placement: 

Take the body, with the thread protruding, pull both ends of the cable through the opening in the head (chain 6 we start with), and through the holes in the button that are placed inside the head (It is better to use a bigger button here, so that the head does not tilt to one side). 

Twist the ends of the wire together, making sure the head can be activated with a little force. 

Half head stuff. 

If you use safety eyes, insert them now. If the eyes are from a sewing loop, attach them to the finished head.  

22-23. 60sc 

24. (dec, 8sc) x6 (54) 

25-27. 54sc 

28. (dec, 7SC) x6 (48) 

29-30. 48 SC 

31. (dec, 4SC) x8 (40) 

32-33. 40SC 

34. (dec, 3sc) x8 (32) 

35. (dec, 2SC) x8 (24) 

36. 24sc 

Add more filling. 

37. (dec, 1SC) x8 

38. Decrease until you have 6-8 sts left, cut the thread, sew the opening, knit at the end. 

If you have eyes with a loop, attach them. That you will do contractions at the same time. 

It will have 4 strands of thread 30 cm each, and a long needle. Fold each strand in half and attach to the loop. Two strands in each eye. 

One strand will go up, one down. 

Threading the needle through one end, insert your needle through the eye opening, pop the needle down near the edge of the button on your head. Pull the thread and leave it.  

Do same with the other end, come out of your needle with the thread first away from the first.  

Pull both ends, making a cheek, a knot, hide it inside the head and knit in the extremes. 

Important: We are using lower ends of each strand, the loop goes horizontally. 

Now we have 2 left ends. They go into the eye opening and out on the opposite side of the head, near the neck. Pull both ends and a knot. Don’t pull too much, or your rabbit will be watching upwards. Knitted at the ends. 

If you have safety eyes. 

No contractions now, using thread (thread) and needle: pull the thread from the two corners of the eye for the neck, making cheeks (photo below). do that before I glued the lashes though, I had to re-take the image, that’s why my bunny has tabs. 

If you are doing contractions (sculpture) of the needle for the first time, here is how: 

You will need a long needle and thread (thread). It can be acrylic, if you are using it to make the rabbit. Making right cheek. 

Threading the needle (you will need about 30 cm of thread), tie a knot at one end. 

Place the thread to the front of the head near the button edge, hiding the knot inside the head. 

Insert the needle with the thread in the directions shown in the photo below: first from the neck up to the inner corner of the eye. Pull until you get a plump cheek. Hold the cheek with the fingers, and sew in the opposite direction, skipping a stitch. Pull more and secure with a knot. 

Do not cut final. Skip 2-3 stitches to the left (hiding the thread inside the head), fix the thread with a knot. Insert the needle and exit through the outer corner of the eye.  

Pull up thread, sew in the opposite direction, skip a stitch. Secure with a knot. Repeat for each other eye. 

Ear. Do 2. 

1. 6SC in a magic ring 

2. inc 6 (12) 

3. (sc, inc) x6 (18) 

4. 18 sc 

5. (2SC, inc) x6 (24) 

6. 24sc 

7. (3sc, inc) x6 (30) 

8. 30SC 

9. (4SC, inc) x6 (36) 

10. 36sc 

Place markers on 1st and 19th sts, on rows 11-30 decrease above markers on each odd row: 

11. dec, 16SC, dec, 16SC 

12. 34sc 

13. dec, 15SC, dec, 15SC 

14. 32sc 

15. dec, 14SC, dec, 14SC 

16. 30SC 

17. dec, 13sc, dec, 13dec 

18. 28sc 

19. dec, 12SC, dec, 12SC 

20. 26SC 

21. dec, 11sc, dec, 11sc 

22. 24sc 

23. dec, 10SC, dec, 10SC 

24. 22sc 

25. dec, 9sc, dec, 19sc 

26. 20SC 

27. dec, 8sc, dec,  8sc. 

29. dec, 7SC, dec, 7SC 

30-42. 16SC 

Cut the thread, leaving the long tail to sew. 


Sew the ears to the head, 1-2 rows above the eyes. 

You can use a plastic nose or embroider with pink thread or thread. 

Glue eye lashes like in the photo below. 

You can make eyelids: 

1. 8-10 ch. Must be 2 \ 3 eye length: from outer corner to end of the pupil, otherwise the rabbit will have a somber expression. Correct length of the chain try it in the eye. 

2. Pd, 2sc, 2hdc, 2sc, pd. The exact number of stitches depends on the length of your chain. 

Stick the eyelashes on the eyelid, let dry. Place the eyelids with the eyelashes on the eye, find the position you like, and tail very carefully. The other, the smaller eyelid, is a 6-8 string. Stick it on the eye. Use glue that dries fast and clear. 

Embroider the mouth, pulling the corners of the nose (see photos below): 

Embroider, or draw, the eyebrows. 


2 ch, 6SC on 2 hook North Dakota ch 

1. inc 6 (12) 

2. (sc, inc) x6 (18) 

3. (2SC, inc) x6 (24) 

4-6. 24 SC 

7. (dec, 2 sc) x6 (18) 

8. dec 6 (12), leave glue to sew 

Matter lightly. Sew the tail onto the body (between 7th and 9th rounds). 

Positioning the arms and legs to the body: 

For this we are going to use the button joints. 

You will need a long needle, strong non-elastic thread (DO NOT use the thread), and 4 buttons. 

The photo below shows how to determine the fixing points. Make sure your rabbit can sit comfortably. 

Mark the points (marker can be used) 

Now you have to pull the thread through: button, arm, body, arm, button. Then go back. Repeat 3-4 times. Secure the thread with a knot, knit at the end. Do the same with the legs. 


Work in a spiral, no rounds join 

1. 6SC in a magic ring 

2. inc 6 (12) 

3. (1sc, inc) x6 (18) 

4. (2SC, inc) x6 (24) 

5. (3sc, inc) x6 (30) 

6. (4SC, inc) x6 (36) 

7. (5SC, inc) x6 (42) 

8. (6SC, inc) x6 (48) 

9. (7SC, inc) x6 (54) 

10. (8sc, inc) x6 (60) 

11. (9sc, inc) x6 (66) 

12. (10SC, inc) x6 (72) 

13. (11sc, inc) x6 (78) 

14. (12SC, inc) x6 (84) 

15. (13sc, inc) x6 (90) 

16-21. inc previous bookmarks (3 increases in a row) 

22. markers move in this row. 108 sc 

23. 108sc 

24-29. dec previous bookmarks (3 decreases in a row) 

30. 90sc 

31. 90sc 

32. (13sc, dec) x6 (84) 

Test the cap: it should not be too small, or slide down. If necessary, correct the size using the adding or removing rows with decreases (Rnd24-29). 

33. 84sc FLO (front loops only).  

34-35. 84sc. 

Cut yarn, knit in the end. 

Visor is knit in the rounds, like the sole. start with 13 ch 

1. sc in 2 North Dakota hook ch, 11sc, 3 sc in last chain loop medium, continue working around string – 11sc, 3sc on the 1st string 

2. (12SC, inc, sc, inc) x2 

3. (13sc, inc, sc, inc) x2 

4. (14SC, inc, sc, inc) x2 

5. (15SC, inc, sc, inc) x2 

6. (16SC, inc, sc, inc) x2 

7. (17sc, inc, sc, inc) x2 

Fold in half along the initial chain, try it on the top – if it looks wide enough for you to continue working consecutive rounds without increases (4-6 rounds). If you want more width, make two more rows with increases, then 2-4 rounds without increases. 

Next round – ps around the brim. 

Do not cut the thread, they continue to give a visor to the surface. (Insert the hook into the visor stitch, to then on the top of, and crochet together). Finish with a round of sl st along the edge. 

Test the lid on your rabbit. 


1. 6SC in a magic ring 

2. inc 6 (12) 

3. (sc, inc) x6 (18) 

4. (2SC, inc) x6 (24) 

5. (3sc, inc) x6 (30) 

This piece should fit between the legs and the tail. If it is too big or too small, correct the size by adding or removing 1-2 rounds. 

6. CH20, skip 5 sc, 10 sc, CH20, skip 5SC, 10 sc. 

Make sure the leg openings are large enough. If not, add more strings.  

7-10. 60sc 

Now we are going to make an opening for the tail. 

Fold the shorts in half to find the center of the back. Place a marker. We are going to work on the row transformation now, leaving 2 sts on each side of the marker (5 sts in total)  

11-13. ch, sc 55 

14. ch, 55sc, ch 5 above the tail opening. Work in rounds now. 15-16. 60 sc. 

Divide into two parts, the back and front (30sts each), finish separately. Front: 

17-20. 30SC 

21. 3sc, DEC 12, 3sc 

22-24. 18sc. Cut yarn, knit in the end. Repeat for back. 

Test the shorts on your rabbit to make sure they fit. To knit a row of sc around the leg openings. 


Chain of appropriate length. 

1. sc in each ch 

2. In every th 

Repeat for the second strap. Sew them on the pants. Sew on buttons pressure or buttons. You can also make pockets. 


1. Ch 8, sc in 2 North Dakota hook ch, 7SC. 

2-6. 7 sc 

7. dec, 5SC 

8. 4SC, DEC 

9. dec, 3sc 

10. 2SC, DEC 

11. dec, sc 

12. Dec 

Leave long tail to sew. 

In the photo below: shorts with one pocket, the other pocket and straps. 

Dress up your bunny)) 

You are done making your rabbit! 

Similar Posts