· Mohair yarn. I have a mohair 50g / 475m in 3 threads

· 1.25 hook or under your yarn

· Yarn for string bag and hook under it. I have Jeans from YarnArt and hook 1.5

· Filler

· Fabric-based wire and patch

· Needle and durable thread for tightenings (we pull off a little bit)

· Needle and thread for sewing

Eyes

Felting needle

White felt or wool for felting eye proteins

Velcro for combing

White acrylic for tinting and black pastel

· A little clay for a nose or a finished nose

· Fishing line for mustache and vibrissa

I began to knit another cat from the same mohair, but in 2 strings, and not in 3.

Hook 1. The cat’s height is about 20cm)

Abbreviations

Ch – air loop

Sc – single crochet

Dec – decrease, knit two stitches together

İnc – increase – we knit two from one column

() х4р – repeat in parentheses 4 times

3in1 – we knit three from one column

Half loop – half loop

Sl-st – connecting column

3vms – 3 stitches knit together

The toy is knitted in a spiral for both half loops, if not specified otherwise.

The ears. (2 pcs.)

We knit in rotary rows. At the beginning of each row do 1vp lift.

Dial a chain of 15ch, from the second loop from the hook

1-5 Row. 14sc

6 row. 3sc, 1dec, 4sc, 1dec, 3sc (12)

7 row. 12sc

8 row. 5sc, 1dec, 5sc (11)

9 row. 5sc, 1dec, 4sc (10)

10 row. 4sc, 1dec, 4sc (9)

11 Row. 4sc, 1dec, 3sc (8)

12 Row. 3sc, 1dec, 3sc (7)

13 row. 2sc, 3vms, 2sc (5)

14 row. 1dec, 1sc, 1dec (3)

15 row. 3vms (1)

Fasten the thread, break it.

Eyelids (2 pcs.)

Dial a chain of 15ch. We knit in rotary rows from the second loop from the hook.

At the beginning of each row do 1ch lift

1-3 row. 14sc

4 row. (2sc, 1dec) x3p, 2sc (11)

Fasten the thread, break it.

Lower jaw.

We knit in rotary rows. At the beginning of each row we do 1ch lift.

Dial a chain of 12ch, from the second loop from the hook

1 row. 11sc

2 row. 4sc, 1dec, 5sc (10)

3 row. 4sc, 1dec, 4sc (9)

4 row. 3sc, 1dec, 4sc (8)

5 row. 3sc, 1dec, 3sc (7)

6 row. 2sc, 3vms, 2sc (5)

7 row. 1dec, 1sc, 1dec (3)

Fasten the thread, break it.

Tail.

You can not follow the marker. Dial the chain and 2ch. Further from 2 loops from

hook

1 row. 6sc

2 row. 6inc (12)

3 row. (2sc, 1inc) х4р (16)

4 row. 16sc

5 row. (3sc, 1inc) х4р (20)

6-12 Row. 20sc (7 rows)

13 row. 1dec, 18sc (19)

14-19 Row. 19sc (6 rows)

Now we insert the wire and begin to stuff.

20 row. 1dec, 17sc (18)

21-26 Row. 18sc (6 rows)

27 Row. 1dec, 16sc (17)

28-34 Row. 17sc (7 rows)

35 row. 1dec, 15sc (16)

36-41 Row. 16sc (6 rows)

42 row. 1dec, 14sc (15)

43-48 Row. 15sc (6 rows)

49 row. 1dec, 13sc (14)

50-55 Row. 14sc (6 rows)

56 row. 1dec, 12sc (13)

57-62 Row. 13sc (6 rows)

63 row. 1dec, 11sc (12)

64-70 row. 12sc (7 rows)

Finish sl-st. Fasten the thread, break it.

Stage 2.

Pens, 2 things)

Dial a chain of 2ch, from the second loop from the hook. You can not follow the marker.

1 row. 6sc

2 row. 6inc (12)

3 row. (1sc, 1inc) x6r (18)

4-7 Row. 18sc

8 row. 1dec, 16sc (17)

9-11 Row. 17sc

12 Row. 1dec, 15sc (16)

13-16 Row. 16sc

17 Row. 1dec, 14sc (15)

We insert the wire and begin to stuff.

18-32 row. 15sc (15 rows)

33 row. 1dec, 13sc (14)

34-54 Row. 14sc (21 rows)

Finish sl-st, fasten thread, break.

Stage 3. Legs.

Left leg.

The marker runs along the inside of the foot and legs. In case of marker leaving

to the side, do offset loops.

Dial the chain from 7ch, then from the second loop from the hook

1 row. 1inc, 4sc, 3in1, on the other side of the 5sc chain (14)

2 row. 7sc, 1inc, 1sc, 1inc, 2sc, 1inc, 1sc (17)

3 row. 7sc, 1inc, 1sc, 1inc, 7sc (19)

4 row. 8sc, 1inc, 1sc, 1inc, 8sc (21)

5-6 Row. 21sc

7 row. 10sc, 1dec, 9sc (20)

8 row. 9sc, 1dec, 8sc, 1inc (20)

9 row. 9sc, 1dec, then we knit for the back half loop 7sc, for both half loop 2sc (19) then for both

half loop

10 row. 19sc

11 Row. 10sc, then enter the hook into the free half loop of the 9th row, grab both half loop

10 rows and knit sc. So with the capture of the half loop of the 9th row, you need to knit 7sc.

2sc for both half loop (19) Next, we knit for both half loop.

12 Row. 7sc, 1dec, (3sc, 1inc) x2p, 2sc (20)

13 row. 2sc, 1dec, 1sc, 1dec, 4sc, for the rear half loop 7sc, for both half loop 2sc (18)

14 row. 18sc

15 row. 1sc, 2dec, 2sc, 1dec, then we introduce the hook into the free half loop of 13 rows,

grab both half loop of the 14th row, knit sc. So with the capture of half loop 13 rows you need

knit according to the pattern: 1sc, 1inc, 2sc, 1inc, 1sc, 1inc. Further for both half loop of the 14th row

we knit the remaining 2sc (18) Next, we knit for both half loops.

16 row. (3sc, 1dec) x2p, 2sc, 1inc, 2sc, 1dec, 1sc (16)

17 Row. 16sc

18 row. 3sc, 1dec, 5sc, 1inc, 5sc (16)

Insert wire and stuff tightly. Next, fill as you knit. Per

marker can not be followed. Later we will displace and align it.

19-40 Row. 16sc (22 rows)

41 row. Incomplete row. We knit so many sc to set a new marker

in the middle of the back of the leg. Next, follow the marker so that it does not

deviated from the vertical. If necessary, make offset loops.

42 row. 11sc, 1inc, 4sc (17)

43 row. 12sc, 1inc, 4sc (18)

44 row. 3sc, 1inc, 4sc, 1inc, 9sc (20)

45 row. 14sc, 1inc, 5sc (21)

46 row. 21sc

47 row. 14sc, 1inc, 6sc (22)

48 row. 15sc, 1inc, 6sc (23)

49 row. 9sc, (1inc, 6sc) x2p (25)

50 row. 17sc, 1inc, 7sc (26)

51 row. 17sc, 1inc, 8sc (27)

52 row. 18sc, 1inc, 8sc (28)

Finish sl-st. Fasten the thread, break it.

Right leg.

The marker runs along the inside of the foot and legs. In case of marker leaving

to the side, do offset loops.

Dial a chain of 7ch. From the second loop from the hook

1 row. 5sc, 3in1, on the other side of the chain 4sc, 1inc (14)

2 row. 1sc, 1inc, 2sc, 1inc, 1sc, 1inc, 7sc (17)

3 row. 7sc, 1inc, 1sc, 1inc, 7sc (19)

4 row. 8sc, 1inc, 1sc. 1inc, 8sc (21)

5-6 Row. 21sc

7 row. 9sc, 1dec, 10sc (20)

8 row. 1inc, 8sc, 1dec, 9sc (20)

9 row. 2sc, for the rear half loop 7sc, then for both half loop 1dec, 9sc (19)

10 row. 19sc

11 Row. 2sc, then enter the hook into the free half loop of the 9th row, grab both half loop

10 rows and knit sc. So with the capture of the half loop of the 9th row, you need to knit 7sc.

10sc for both half loop (19) Next, we knit for both half loop.

12 Row. 2sc, (1inc, 3sc) x2p, 1dec, 7sc (20)

13 row. 2sc, for the rear half loop 7sc, then for both half loop 4sc, 1dec, 1sc, 1dec, 2sc (18)

14 row. 18sc

15 row. 2sc, then enter the hook into the free half loop of the 13th row, grab both

half loop of the 14th row, we knit sc. So with the capture of half loop 13 rows you need to knit

circuit: 1inc, 1sc, 1inc, 2sc, 1inc, 1sc. Next, for both half loops of the 14th row, we knit 1dec,

2sc, 2dec, 1sc (18)

16 row. 1sc, 1dec, 2sc, 1inc, 2sc, (1dec, 3sc) x2p (16)

17 Row. 16sc

18 row. 5sc, 1inc, 5sc, 1dec, 3sc (16)

Insert wire and stuff tightly. Next, fill as you knit. Per

marker can not be followed. Later we will displace and align it.

19-40 Row. 16sc (22 rows)

41 row. Incomplete row. We knit so many sc to set a new one

marker in the middle of the back of the leg. Next, follow the marker so that it does not

deviated from the vertical. If necessary, make offset loops.

42 row. 4sc, 1inc, 11sc (17)

43 row. 4sc, 1inc, 12sc (18)

44 row. 9sc, 1inc, 4sc, 1inc, 3sc (20)

45 row. 5sc, 1inc, 14sc (21)

46 row. 21sc

47 row. 6sc, 1inc, 14sc (22)

48 row. 6sc, 1inc, 15sc (23)

49 row. (6sc, 1inc) x2p, 9sc (25)

50 row. 7sc, 1inc, 17sc (26)

51 row. 8sc, 1inc, 17sc (27)

52 row. 8sc, 1inc, 18sc (28)

Do not break the thread. From here we continue knitting carcasses.

 Stage 4. Carcass.

We continue knitting on the right leg.

1 row. 9sc (check if the marker did not run away, then there should be the most

protruding point of the foot), 6ch, 28sc along the left foot (starting from the very

protruding point), 6sc along the chain of ch, 19sc along the right leg (68)

2 row. Incomplete row. 9sc on the right foot, 3sc on the chain of ch.

We expose the new brand Row. Now he goes to the center of the back.

3 row. 17sc, 1inc, 32sc, 1inc, 17sc (70)

4 row. 2sc, 1inc, (3sc, 1inc) х4р, (2sc, 1inc) х4р, 8sc, (1inc, 2sc) х4р,

(1inc, 3sc) x4p, 1inc, 2sc (88)

5 row. 6sc, 1inc, 11sc, 1inc, 12sc, 1inc, 24sc, 1inc, 12sc, 1inc, 11sc, 1inc,

6sc (94)

6 row. 1dec, 1inc, 88sc, 1inc, 1dec (94)

7 row. 1dec, 1inc, 88sc, 1inc, 1dec (94)

8 row. 1dec, 90sc, 1dec (92)

9 row. 1dec, 22sc, 1dec, 7sc, 1dec, 22sc, 1dec, 7sc, 1dec, 22sc, 1dec (86)

10 row. 86sc

11 Row. 1dec, 82sc, 1dec (84)

12 Row. 41sc, 1dec, 39sc, 3vms (82) Take the third loop to decrease

next row. Thus, the marker will shift 1 loop to the left.

13 row. 3sc along with 3sc tail, 76sc, 3sc along with 3sc tail

(82)

14 row. 19sc, 1dec, 40sc, 1dec, 16sc, 3sc tail (80)

Move the marker here, now it goes to the center of the tail and goes

to the back.

15 row. 3sc tail, 6sc, (1dec, 18sc) x3p, 1dec, 9sc (76)

16 row. 76sc

17 Row. 2sc, 1dec, 16sc, 1dec, 32sc, 1dec, 16sc, 1dec, 2sc (72)

18 row. 8sc, 1dec, 52sc, 1dec, 8sc (70)

19 row. 70sc

20 row. 10sc, 1dec, 46sc, 1dec, 10sc (68)

21-23 Row. 68sc

24 row. 13sc, 1dec, 38sc, 1dec, 13sc (66)

25 row. 5sc, 1dec, 15sc, 1dec, 18sc, 1dec, 15sc, 1dec, 5sc (62)

26 Row. 62sc

27 Row. 17sc, 1dec, 6sc, 1dec, 8sc, 1dec, 6sc, 1dec, 17sc (58)

28 Row. 24sc, 1dec, 6sc, 1dec, 24sc (56)

29-33 Row. 56sc (5 rows)

34 row. 20sc, 1dec, 12sc, 1dec, 20sc (54)

35-44 Row. 54sc (10 rows)

45 row. 11sc, 1dec, 28sc, 1dec, 11sc (52)

46 row. 52sc

47 row. 6sc, 1dec, 36sc, 1dec, 6sc (50)

48-49 Row. 50sc

50 row. 10sc, 6sc together with 6sc hands, 18sc, 6sc together with 6sc hands,

10sc (50)

51 row. 10sc, 8sc on the arm, 18sc, 8sc on the arm, 10sc (54)

52 row. 15sc, 1dec, 20sc, 1dec, 15sc (52)

53 row. 6sc, 1dec, 2sc, 1dec, 6sc, 1dec, 12sc, 1dec, 6sc, 1dec, 2sc, 1dec,

6sc (46)

54 row. 46sc

55 row. 3sc, 1dec, 10sc, 1dec, 12sc, 1dec, 10sc, 1dec, 3sc (42)

56 row. 6sc, (1dec, 5sc) x4p, 1dec, 6sc (37)

57 Row. (3sc, 1dec) х3р, 7sc, (1dec, 3sc) х3р (31)

58 row. (2sc, 1dec) х3р, (1sc, 1dec) х2р, 1sc, (1dec, 2sc) х3р (23)

59 row. 23sc

60 row. 10sc, 1dec, 11sc (22)

61 row. 22sc

Do not break the thread, continue knitting the head.

Stage 5. Head.

We continue knitting. The marker is on the back of the head.

1 row. 22sc

2 row. (1sc, 1inc) х11р (33)

3 row. 16sc, 1inc, 16sc (34)

4 row. (2sc, 1inc) х3р, (1sc, 1inc) х4р, (1inc, 1sc) х4р, (1inc, 2sc) х3р (48)

5 row. 48sc

6 row. (3sc, 1inc) х3р, (2sc, 1inc) х4р, (1inc, 2sc) х4р, (1inc, 3sc) х3р (62)

7 row. 8sc, 1inc, (5sc, 1inc) х3р, 8sc, (1inc, 5sc) х3р, 1inc, 8sc (70)

8 row. 70sc

9 row. (6sc, 1inc) х10р (80)

10 row. (9sc, 1inc) x8r (88)

11-16 Row. 88sc

If the marker escaped, align it now. In case of displacement loops

have to do often, now it’s better to make an additional loop

displacement.

17 Row. 38sc, 1inc, 1dec, 6sc, 1dec, 1inc, 38sc (88)

18 row. 39sc, 1dec, 6sc, 1dec, 39sc (86)

19 row. 37sc, 1inc, 1dec, 6sc, 1dec, 1inc, 37sc (86)

20 row. 37sc, 1inc, 1dec, 6sc, 1dec, 1inc, 37sc (86)

21 row. 38sc, extra marker, 1dec, 6sc, 1dec, extra marker,

38sc (84)

22 row. 36sc, 1inc, 1dec, 6sc, 1dec, 1inc, 36sc (84)

23 row. 36sc, 1inc, 1dec, 6sc, 1dec, 1inc, 36sc (84)

24 row. 5sc, 1dec, (9sc, 1dec) х3р, 4sc, (1dec, 9sc) х3р, 1dec, 5sc (76)

25 row. 34sc, 1dec, 4sc, 1dec, 34sc (74)

26 Row. 32sc, 1inc, 1dec, 4sc, 1dec, 1inc, 32sc (74)

27 Row. 6sc, 1dec, 8sc, 1dec, 6sc, 1dec, 7sc, 1dec, 4sc, 1dec, 7sc, 1dec, 6sc, 1dec, 8sc,

1dec, 6sc (66)

28 Row. 29sc, 1dec, 4sc, 1dec, 29sc (64)

29 Row. (6sc, 1dec) x8r (56)

30 row. 56sc

We start to fill, trying to keep in shape. See the photo. We are a little

we will tighten, while maintaining these bends.

31 row. (5sc, 1dec) x8r (48)

32 row. (6sc, 1dec) х6р (42)

33 row. (5sc, 1dec) x6r (36)

34 row. (4sc, 1dec) х6р (30)

35 row. (3sc, 1dec) х6р (24)

36 row. (2sc, 1dec) x6r (18)

37 Row. (1sc, 1dec) x6r (12)

38 row. 6dec (6)

Pull the hole. Fasten the thread, break it.

Stage 6. Design.

First you need to comb the cat well and all the details.

Now make the ducks. We introduce a needle with a strong thread under the jaw, including

the place where we had a “bulge”. We display about 1 marker. Enter in pair

loops from the exit point of the thread and display about 2 markers. Retreating a couple

loops and return the needle to point 1. Having retreated a couple of loops, we return under

jaw. Tighten the thread so that the nose forms, tighten the knot, thread

cut off.

Repeat the same procedure for the second eye. Insert the needle under the jaw

output at point 2. Enter a pair of loops from the exit point of the thread and output to

point 1. Return the needle to point 2 and then under the jaw. Fasten the thread,

hide the tips.

Sew the lower jaw and ears.

Fasten the eyes and roll the white of the eyes. You can use white felt

instead of felting.

Now we’ll emphasize the muzzle line a bit, go through the felting needle

lines from the corner of the mouth. I also walked a little along the line from nose to mouth and

toned this line with a black marker. But you can simply flash this line

black thread.

Sew the eyelids so as to cover the eye almost halfway.

Sculpt the nose (or use the finished one), fasten.

Now toning. We collect some paint on the brush, the brush should remain

semi-dry. We tint the tips of the ears, breast, strip from the nose bridge upwards

forehead. Slightly tinted line from the eye to the line of the mouth. Black pastel

toned around the nose.

We fix the mustache.

To do this, cut pieces of fishing line 3 times longer than the planned length of the mustache.

Fold in half and tie a knot. We take a needle and thread with a strong thread.

The color is as close as possible to the main color. Thread in one addition. We introduce

a needle in a mouth and we deduce on the right on a muzzle.

Now we enter the needle with the BACK, blunt side through one loop from the point

exit the thread and display on the left on the face in the place where we plan the antennae.

The needle is not pulled out, leave in the muzzle.

And pull the thread from the needle. We pass the thread through the knot on the fishing line and insert

thread back into the needle. We pull out the needle on the right side of the muzzle, holding out

fishing line inside the muzzle.

In the same way we stretch the second antennae. Having finished with him, we take the needle into his mouth,

we tie the thread and hide the ends.

Repeat for the right side of the face.

For vibrissa we introduce a needle the BACK of the mouth from the mouth to the point where we plan

vibrissa. Do not pull the needle to the end. Pull the thread from the needle, thread

through the loop on the fishing line, we thread the thread back into the needle. Pull the needle out

mouth. Tie the ends of the thread with a knot, hide. Repeat from the second side.

String bag.

We knit a chain of 7ch.

We estimate the size of the string bag and take the thread 5 times longer. I have a string bag (myself

mesh) 7cm. So I need a 35cm long thread. Cut off 8 pieces

35cm long.

Fold the thread in half, pull through the outer loop of our pigtail,

we fix. Repeat 4 fasteners on each side of the pigtail – through one

a loop.

The result is such a design. 8 bundles of 2 threads each.

Now we need to pick up 2 templates, according to which we will measure the size of the cell

string bags. The main size is bigger, I have a thick Row brand. Second template in 2-

3 times smaller in diameter – I have a pen from the brush.

Now play the spider and weave the net. We take 2 threads from neighboring bunches,

set a smaller template and tie it to 2 knots. Repeat with

following bundles. The first row has turned out.

We no longer need this template, then we work with a large one.

The second row is tied around a large template, taking threads from neighboring bundles.

We no longer need this template, then we work with a large one.

The second row is tied around a large template, taking threads from neighboring bundles.

Repeat to the desired height. The last row is done without templates, “on

eye”. We knit so that we get a triangle, without tightening it at all

to end.

So we narrow the edge of the string bag a little.

Next, you need to tie the edge with crochets. I got 3sc by

each side of the “triangle”. Those. it turned out 24sc (8 triangles in

3sc).

Now a little math. Divide the resulting number of columns by 2 (2

side of the bag). I got 12sc on each side. Now need

divide each side into 3 parts – the middle part – the place of knotting.

I got 4sc from each side to the handle, 4sc of the handle, 4sc after

pens.

Fold the string bag in half, knit the incomplete row to the bend point, then knit

according to 4sc, 20ch, skip 4 loops and then knit 4sc. That’s how we

make one side of the string bag. We continue the second side. 4sc, 20ch,

skip 4 loops, then 4sc.

Fill string bag to taste))

Hat.

Bobbin yarn “Velor” (Italy), hook No. 1.25 Hat height 3 cm.

You can not follow the marker.

1 row. 6sc to KA

2 row. 6 inc = 12 (12)

3 row. (1sc, inc) * 6 = 18 (18)

4 row. (2sc, inc) * 6 = 24 (24)

5 row. (3sc, inc) * 6 = 30 (30)

6 row. 2sc, inc, (4sc, inc) * 5.2sc = 36 (36)

7 row. We knit this row for the back half-loops (3sc, dec) * 6 = 30 (30)

8-9 Row. 30sc (30)

10 row. (8sc, dec) * 3 = 27 (27)

11-13 Row. 27sc (27)

14 row. (7sc, dec) * 3 = 24 (24)

15-18 Row. 24 sc (24)

19 row. (7sc, inc) * 3 = 27 (27)

20 row. We knit this row for the front half-loops (inc, 1sc) * 9 = 45 (45)

21 row. (inc, 4sc) * 9 = 54 (54)

22 row. (inc, 8sc) * 6 = 60 (60)

23 row. (inc, 9 sc) * 6 = 66 (66)

The edge of the cap is tied with a “crib step”.

Butterfly

1p dial a chain of 11ch, from the second loop from the hook. Knit rotary

in rows, doing p. lifting.

1-5 p 10 sc

Tie around the perimeter with a “crib step”.

I connected the jumper (the center of the bow) like this: I dialed a chain of 7ch. Then pulled off

butterfly in the center and sewn it to the neck of the cat.

Facebook Group: Crochet.pinto.live

Facebook Offical Page: Crochet.pinto.live

Material used:

Amigurumi Yarn by Círculo: 1 ball in colors 8013 (glacial), 2137 (hydrangea), 8176 (off white)

and 7567 (cocoa)

Crochet hook: 1 2.5mm needle

Tapestry needle nº16

1 middle button

Acrylic Fiber for Filling

Size: 30cm

Love Amigurumi? Find everything you need to make your beautiful pets here.

EXECUTION

PATTERN: @brincardecroche

Head

Start wired 8013

1 – 6sc into magic ring. = 6sc

2 – 6x 6x = 12sc

3 – 1sc 1 inc 6x = 18sc

4 – 2sc 1 inc 6x = 24sc

5 – 3sc 1 inc 6x = 30sc

6 – 4sc 1 inc 6x = 36sc

7 – 5sc 1 inc 6x = 42sc

8 – 6sc 1 inc 6x = 48sc

9 – 7sc 1 inc 6x = 54sc

10 – 8sc 1 inc 6x = 60sc

11 to 18 – 1sc over each sc 60x = 60sc

19 – 8sc 1 dec 6x = 54sc

20 – 7sc 1 dec 6x = 48sc

21 – 6sc 1 dec 6x = 42sc

22 – 5sc 1dec 6x = 36sc

23 – 4sc 1dec 6x = 30sc

24 – 3sc 1dec 6x = 24sc

25 – 2sc 1dec 6x = 18sc

Finish and hide the wire inside the piece.

Hat

Start wired 2137

1 – 6sc into magic ring. = 6sc

2 – 6x 6x = 12sc

3 – 1sc 1 inc 6x = 18sc

4 – 2sc 1 inc 6x = 24sc

5 – 3sc 1 inc 6x = 30sc

6 – 4sc 1 inc 6x = 36sc

7 – 5sc 1 inc 6x = 42sc

8 – 6sc 1 inc 6x = 48sc

9 – 7sc 1 inc 6x = 54sc

10 – 8sc 1 inc 6x = 60sc

11 – 20sc 1 inc 2x, 1sc over each sc 18x = 62sc

12 to 15 – 1sc for each sc 62x = 62 sc

Cap flap

Start wired 2137

Work in linear crochet. At the end of each row make 1 ch and turn the work over.

16 – 1sc over each sc 20x = 20sc

17 – 1sc on each sc 19x = 19sc not working the last sc of the career

18 – 1sc on each sc 18x = 18sc not working the last sc of the career

19 – 1sc on each sc 17x = 17sc not working the last sc of the career

20 – Skip the first sc of the career. 1sc over each 14x sc. do not work the last 2 sc of the career.

21 – Skip the first sc of the career. 1sc over each 12x sc. do not work the last sc of the career.

To finish the cap do from the last sc of row Nº 21 1scx in each gap between one row and another of the cap flap and 1 scx in each sc of the entire contour of the cap until you reach the scx that started the cap finishing .

Finish with sc and hide the thread between the stitches.

Ear (do two)

Start wired 2137

1 – 4sc into magic ring = 4sc

2 – 1sc 1 inc 2x = 6sc

3 – 1sc 1 um. 2x = 9sc

4 – 1 sc for each sc 9x = 9sc

5 – 1inc 1 sc 3x. inc 1 x = 14sc

6 and 7 – 1sc for each sc 14x = 14sc

8 – 1 inc 1sc 7x = 21sc

9 – 1sc over each sc = 21sc

Finish and leave thread to sew.

Sew the ear in row nº 9 of the cap trying to leave them aligned with the flap with 3sc of distance between them, sew with the aid of a tapestry needle nº 16, taking only the handle of each sc of the ear passing over with the needle and a cap sc passing underneath, always in the same direction for a more harmonious stitching.

Snout

Start wired 8176

1 – 11 ch

2 – Start on the second ch inc 1x. 1sc over each 8x sc. inc 1 x (Work the other side of the floors) inc 1x. 1sc for each 8x sc. inc 1 x. = 24sc

3 and 4 – 1sc for each sc 24x = 24sc

5 – inc 1 x. 1sc over each sc 1 x. inc 1 x. 1sc over each 8x sc, 1x inc. 1sc over each sc 1 x. inc 1 x 1sc on each 9x sc. inc 1x = 29sc

Finish and leave thread to sew.

Sew the muzzle from row 13 of the head with the help of a # 16 upholstery needle, taking only the back handle of each sc before finishing sewing, add a little bit of filling to make the muzzle volume. With the help of a tapestry needle nº16 and thread nº 7567 embroider the nose in the form of an inverted triangle in the center of the snout below it, make a vertical streak then make two horizontal streaks one on each side forming the kitten’s smile. Still with the tapestry needle No. 16 and thread 7567, embroider the eyes in an “L” shape upside down, facing each side, leaving the ends where the cat’s nose ends.

Body

Start wired 8013

1 – 6sc into magic ring. = 6sc

2 – 6x 6x = 12sc

3 – 1sc 1 inc 6x = 18sc

4 – 2sc 1 inc 6x = 24sc

5 – 3sc 1 inc 6x = 30sc

6 – 4sc 1 inc 6x = 36sc

7 – 5sc 1 inc 6x = 42sc

8 – 6sc 1 inc 6x = 48sc

9 to 11 – 1sc over each sc 48x = 48sc

12 – 6sc 1 dec 6x = 42sc

13 and 14 – 1sc for each sc 42x = 42sc

15 – 5sc 1 dec 6x = 36sc

16 and 17 – 1sc for each sc 36x = 36sc

18 – 10sc 1 dec 3x = 33sc

19 – 1sc for each sc 33x = 33sc

20 – 9sc 1 dec 3x = 30sc

21 – 1sc for each sc 30x = 30sc

22 – 8sc 1 dec 3x = 27sc

23 – 1sc for each sc 27x = 27sc

24 – 7sc 1 dec 3x = 24sc

25 – 1sc for each sc 24x = 24sc

26 – 6sc 1 dec 3x = 21sc

27 – 1sc for each sc 21x = 21sc

28 – 5sc 1dec 3x = 18sc

Finish and leave thread to sew.

Join the body to the head with the help of a # 16 upholstery needle passing the line between 1sc of the head and one of the body joining each other. Do this with the 18sc of the two pieces, finish off and hide the rest of the thread inside the piece.

Legs

Start wired 8013

1 – 6sc into magic ring. = 6sc

2 – 6x 6x = 12sc

3 – 1sc 1 inc 6x = 18sc

4 – 2sc 1 inc 6x = 24sc

5 to 8 – 1sc for each sc 24x = 24sc

9 – 2sc 1 dec 6x = 18sc

10 – 1sc 1dec 6x = 12sc

11 to 28 – 1sc for each sc 12x = 12sc

Fold the leg in half and make a sc over two dc joining them. 6x. = 6sc Sew the legs with the aid of a # 16 upholstery needle in row 7 of the body with 3sc of distance between each other trying to keep the legs aligned with the face.

Arms

Start wired 8013

1 – 6sc into magic ring. = 6sc

2 – 6 inc = 12sc

3 – 1sc 1 inc 6x = 18sc

4 and 5 – 1sc for each sc 18x = 18sc

6 – 1sc 1dec 6x = 12sc

7 to 9 – 1sc for each sc 12x = 12sc

10 – 10sc 1 dec 1x = 11sc

11 to 14 – 1sc for each sc 11x = 11sc

15 – 9sc 1 dec 1x = 10sc

16 to 19 – 1sc for each sc 10x = 10sc

20 – 8sc 1 dec 1x = 8sc

21 to 23 – 1sc for each sc 8x = 8sc

Fold the arm in half and make a sc on top of two sc joining them together. 4x. = 4sc Sew with the aid of a tapestry needle nº16 the arms in the last row of the body leaving approximately 5sc of distance between each other, try to leave them right on the sides of the body.

Tail

Start wired 7567

1 – 5sc into magic ring = 5 sc

2 – (inc 1x), 1sc over each 3x sc. (inc 1x) = 7sc

3 and 4 – 1sc over each sc 7x = 7sc

Switch to wire 8013

5 to 7 – 1 sc over each sc 7x = 7sc

Switch to 7567 wire

8 and 9 – 1 sc over each sc 7x = 7sc

Switch to 8013 wire

10 and 11 – 1 sc over each sc 7x = 7sc

Switch to 7567 wire

12 – 1 sc over each sc 7x = 7sc

Switch to 8013 wire

13 to 30 – 1 sc over each sc 7x = 7sc

Finish with scx and sew with the help of a tapestry needle # 16, the tail in row # 7 of the little body on the back where Mr. Cat’s butt would be, passing the needle through a point of the fox and a point of the little body until it has gone through all the points of the tail.

Encharpe

Work in Jacquard technique.

1 – 59 little chains.

2 – Start on the third floor 1dc on each floor 4x in color 7567. 1dc on each floor 4x in color 2137. 1dc on each floor 2x in color 8176. 5x. 1dc on each ch 4x in color 7567. 1dc on each ch 3x in color 2137. close the row with scx = 57dc

3 – Make 3 ch and work the other side of the initial ch do not turn the work over so the color change thread will appear. 1dc on each floor 4x in color 8176. 1dc on each floor 4x in color 2137. 1dc on each floor 2x in color 7567 5x. 1dc on each 4x floor in color 8176. 1dc on each 5x floor in color 2137. close the row with scx = 57dc

Finish off the wires.

4 – Attach the thread to the first dc of the previous row. 3 ch in color 8176 1dc over each dc 3x in color 8176. 1dc over each dc 4x in color 7567. 1dc over each ch 2x in color 2137. 5x 1dc over each dc 4x in color 7567. 1dc over each dc 3x in color 8176 . = 57dc

Finish off the wires.

5 – Attach the wire to the first dc of the first carriage. 3 ch in color 8176 1dc over each dc 3x in color 8176. 1dc over each dc 4x in color 7567. 1dc over each ch 2x in color 2137. 5x 1dc over each dc 4x in color 8176. 1dc over each dc 3x in color 7567 . = 57dc With the help of a needle and tapestry no. 16 hide the stitches left over on each side after the finish. Wrap the scarf around Mr. Cat’s neck, leaving the part with the strands showing inside and join the two parts together by sewing a wooden button in color next to the 7567 on them.

Craftswoman: Viviane Rentroia

Termonology
MR Magic Ring
Ch Chain
Sl st slip stitch
Sc single crochet
Hdc half double crochet
Dc double crochet
Tr (or trc) triple (or treble) crochet
Inc increase (Add one or more stitches.)
Dec decrease (Eliminate one or more stitches.)
Turn Turn your work so you can work back for the next row.
Join Join two stitches together; usually done by working a slip stitch in the top of the next stitch.
Rep repeat (Do it again.)

Head:

With cream color; spiral is worked

1.- 9 sc, 3sc in the last chain, 8 sc on the other side., 2 sc in the last chain(22)

2.- 1 inc, 8 sc, 3 inc, 8 sc, 2 inc (28)

3.- 1 inc, 9 sc, 1 inc, 1 sc, 1 inc, 1 sc, 1 inc, 9 sc, 1 inc, 1 sc, 1 inc, 1 sc (34)

4.- 1 inc, 10 sc, 1 inc, 2 sc, 1 inc, 2 sc, 1 inc, 10 sc, 1 inc, 2 sc, 1 inc, 2 sc (40)

5.- 1 inc, 11 sc, 1 inc, 3 sc, 1 inc, 3 sc, 1 inc, 11 sc, 1 inc, 3 sc, 1 inc, 3 sc (46)

6.- 1 inc, 12 sc, 1 inc, 4 sc, 1 inc, 4 sc, 1 inc, 12 sc, 1 inc, 4 sc, 1 inc, 4 sc (52)

7.- 1 inc, 13 sc, 1 inc, 5 sc, 1 inc, 5 sc, 1 inc, 13 sc, 1 inc, 5 sc, 1 inc, 5 sc (58)

8.- 1 inc, 14 sc, 1 inc, 6 sc, 1 inc, 6 sc, 1 inc, 14 sc, 1 inc, 6 sc, 1 inc, 6 sc (64)

9…18- every loop 1 sc(64 in all ranks)

19.- 1 dec, 14 sc, 1 dec, 6 sc, 1 dec, 6 sc, 1 dec, 14 sc,, 1 dec, 6 sc, 1 dec, 6 sc (58)

20.- 1 sc every loop (58)

21.- 1 dec, 13 sc, 1 dec, 5 sc, 1 dec, 5 sc, 1 dec, 13 sc, 1 dec, 5 sc, 1 dec, 5 sc (52)

22.- 1 sc every loop (52)

23.- 1 dec, 12 sc, 1 dec, 4 sc, 1 dec, 4 sc, 1 dec, 12 sc, 1 dec, 4 sc, 1 dec, 4 sc (46)

24.- 1 dec, 11 sc, 1 dec, 3 sc, 1 dec, 3 sc, 1 dec, 11 sc, 1 dec, 3 sc, 1 dec, 3 sc (40)

25.- 1 dec, 10 sc, 1 dec, 2 sc, 1 dec, 2 sc, 1 dec, 10 sc, 1 dec, 2 sc, 1 dec, 2 sc (34)

26.- 1 dec, 9 sc, 1 dec, 1 sc, 1 dec, 1 sc, 1 dec, 9 sc, 1 dec, 1 sc, 1 dec, 1 sc (28)

27.- 1 dec, 8 sc, 1 dec, 2 sc, 1 dec, 8 sc, 1 dec, 2 sc (24)

We close with 1 sl-st, leaving long thread to join the body.
We put the safety eyes (this time half head and sideways).
Complete the compression.

Nose

We work in rows, not on tour.
Beige (darker than face)

1.- 4 chain and between them.3 sc (3)

2.- 3 sc (3)

3.- 3 sc (3)

4.- 1 inc, 1 sc, 1 inc (5)

5-6.- 1 sc every loop (5)

7.- 1 inc, 3 sc, 1 inc (7)

8-9.- 1 sc every loop (7)

10.- 1 inc, 5 sc, 1 inc (9)

11-12.- 1 sc every loop (9)

13.- 1 inc, 7 sc, 1 inc (11)

14-15.- 1 sc every loop (11)

16.- 1 inc, 9 sc, 1 inc (13)

We take a rope and give a tight needle around the whole piece.

With black thread sewing on the head or sticking slightly down the eyes
We do embroidery.

We do four freckles on both sides with a permanent marker.

Let’s paint with a lipstick.

Ears (2 pieces)

Cream colored,

1.- 4 sc into magic circle (4)

2.- 4 inc (8)

3.- 1 sc, 1 inc, Repeat until the row ends. (12)

4.- 1 sc every loop (12)

5.- 2 sc, 1 inc, Repeat until the row ends. (16)

6.- 3 sc, 1 inc, Repeat until the row ends. (20)

7.- 1 sc every loop (20)

8.- 4 sc, 1 inc, Repeat until the row ends. (24)

9-10.- 1 sc every loop (24)
1 sl-st close up.

We put two pieces of cloth on each ear with a silicone gun.
We sew without filling the edges of the head.

Feet (2 pieces)

1.- Start with cream color yarn, 6 sc into magic circle (6)

2.- 6 inc (12)

3.- 3 sc, 1 inc, Repeat until the row ends. (15)

4-12.- 1 sc every loop (15)

13.- Back to the gray thread, 1 sc every loop (15)

14.- white color yarn, 1 sc every loop (15)

15-16.- gray color yarn, 1 sc every loop (15)

17.- white color yarn, 1 sc every loop (15)

18-19.- gray color yarn, 1 sc every loop (15)

20.- white color yarn, 1 sc every loop (15)

21-22.- gray color yarn, 1 sc every loop (15)

23.- white color yarn, 1 sc every loop (15)

24-25.- gray color yarn, 1 sc every loop (15)

26.- white color yarn, 1 sc every loop (15)

27-28.- gray color yarn, 1 sc every loop (15)

29.- white color yarn, 1 sc every loop (15)

30-31.- gray color yarn, 1 sc every loop (15)

32.- white color yarn, 1 sc every loop (15)

33-34.- gray color yarn, 1 sc every loop (15)

35.- white color yarn, 1 sc every loop (15)

36-37.- gray color yarn, 1 sc every loop (15)

38.- white color yarn, 1 sc every loop (15)

39-40.- gray color yarn, 1 sc every loop (15)

BODY

It is made with the feet.
We will continue to knit both legs after weaving.

41.- white color yarn, 3 sc in the first stage, 8 chain, 15 sc in the second stage, 8 sc, 12 sc (46)

42-43.- gray color yarn, 1 sc every loop (46)

44.- white color yarn, 1 sc every loop (46)

45.- gray color yarn, 17 sc, 1 dec, 22 sc, 1 dec, 3 sc (44)

46.- gray color yarn, 1 sc every loop (44)

47.- white color yarn, 17 sc, 1 dec, 21 sc, 1 dec, 2 sc (42)

48.- gray color yarn, 1 sc every loop (42)

49.- gray color yarn, 5 sc, 1 dec, Repeat until the row ends. (36)

50.- white color yarn, 1 sc every loop (36)

51-52.- gray color yarn, 1 sc every loop (36)

53.- white color yarn, 1 sc every loop (36)

54.- gray color yarn, 1 sc every loop (36)

55.- gray color yarn, 4 sc, 1 dec, Repeat until the row ends. (30)

56.- white color yarn, 1 sc every loop (30)

57-58.- gray color yarn, 1 sc every loop (30)

59.- white color yarn, 1 sc every loop (30)

60-61.- gray color yarn, 1 sc every loop (30)

62.- white color yarn, 3 sc, 1 dec, Repeat until the row ends. (24)

63.- gray color yarn, 1 sc every loop (24)

1 sl-st close up.

Fill tightly (to fill a long clamp or knitting needle on the legs). We join the head with a wool needle with point sewing needle.

Handles (2 pieces)

it is continuously woven, not spiral.

1.- Cream color with yarn, 6 sc into magic circle (6)

2.- 6 inc (12)

3-11.- 1 sc every loop (12)

12.- gray color yarn, 1 sc every loop (12)

13.- white color yarn, 1 sc every loop (12)

14-15.- gray color yarn, 1 sc every loop (12)

16.- white color yarn, 1 sc every loop (12)

17-18.- gray color yarn, 1 sc every loop (12)

19.- white color yarn, 1 sc every loop (12)

20-21.- gray color yarn, 1 sc every loop (12)

22.- white color yarn, 1 sc every loop (12)

23-24.- gray color yarn, 1 sc every loop (12)

25.- white color yarn, 1 sc every loop (12)

26-27.- gray color yarn, 1 sc every loop (12)

28.- white color yarn, 1 sc every loop (12)

29-30.- gray color yarn, 1 sc every loop (12)

31.- white color yarn, 1 sc every loop (12)

32.- gray color yarn, 1 sc every loop (12)

Complete the compression.

33.-Gray color yarn, 6 dec (6)

We’re sewn to the edges of our bodies.

Bow tie

gray color yarn,

1.- 12 chains and 10 Hdc between them (10)

2-6.- 1 single handrail every loop (10)

We lift a chain and make sc.
We marked the middle with a yarn.